TS-1635AX-4G - NAS QNAP - Free user manual and instructions
Find the device manual for free TS-1635AX-4G QNAP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | NAS (Network Attached Storage) |
| Brand | QNAP |
| Model | TS-1635AX-4G |
| Number of Drive Bays | 16 (3.5-inch SATA) |
| Installed Memory | 4 GB DDR4 (expandable up to 16 GB) |
| Processor | Annapurna Labs Alpine AL-324 Quad-core ARM Cortex-A57 |
| Ethernet Ports | 2 x 10GbE (SFP+) and 2 x 1GbE (RJ45) |
| USB Ports | 3 x USB 3.2 Gen 1 (front) + 2 x USB 2.0 (rear) |
| Dimensions (HxWxD) | 180 x 315 x 230 mm |
| Weight | Approx. 5.2 kg (without drives) |
| Power Supply | 250W PSU, 100-240V AC, 50/60Hz |
| Maximum Raw Capacity | Up to 256 TB (with 16 x 16 TB drives) |
| Supported RAID Levels | JBOD, 0, 1, 5, 6, 10, 50, 60, 6+hot spare |
| Operating System | QNAP QTS 4.5 (or later) |
| Key Features | High-capacity storage, 10GbE connectivity, SSD caching, virtualization support |
| Cooling | 1 x 120mm quiet fan |
| Noise Level | About 25 dB(A) at standby |
| Operating Temperature | 0°C to 40°C |
| Warranty | 2 years limited |
| Maintenance | Clean with dry cloth, keep vents free of dust |
| Safety | Supports encryption (AES-256), antivirus, and backup |
| Spare Parts & Repairability | FRUs: drives, RAM, PSU, fan; user-replaceable |
Frequently Asked Questions - TS-1635AX-4G QNAP
How do I access the QNAP NAS for the first time?
Connect the NAS to your network and power it on. Use Qfinder Pro on your computer to discover the NAS and initialize it via the web interface.
Can I install my own drives?
Yes, the TS-1635AX-4G supports 3.5-inch SATA hard drives or 2.5-inch SSDs. You need to open the front drive trays and install the drives without tools.
How to expand storage capacity?
You can add drives to empty bays or replace smaller drives with larger ones. Use QTS Storage Manager to expand existing RAID volumes online.
What is the default login credential?
The default username is admin and password is admin (change immediately). Initially, you set credentials during first setup.
How to reset the NAS to factory defaults?
Press and hold the Reset button on the back for 10 seconds until a long beep. This resets settings but keeps data.
Does it support 10GbE connections?
Yes, it has two 10GbE SFP+ ports for high-speed networking. You need compatible cables or transceivers.
How to set up a RAID configuration?
Go to Storage Manager in QTS, select drives, and create a RAID group. Choose RAID level based on your performance and redundancy needs.
Can I use this NAS for virtualization?
Yes, you can run Virtualization Station to host virtual machines and containers, leveraging the ARM processor and ample memory.
How to replace a failed drive?
The NAS will alert you. Hot-swap the failed drive with a new one of same or larger capacity. The system will automatically rebuild the RAID.
What is the maximum supported volume size?
With the latest QTS, the NAS supports volumes up to 256 TB (subject to drive sizes and RAID configuration).
User questions about TS-1635AX-4G QNAP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual TS-1635AX-4G - QNAP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS-1635AX-4G by QNAP.