H-4310X - Label printer Datamax O'Neil - Free user manual and instructions
Find the device manual for free H-4310X Datamax O'Neil in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Label Printer |
| Brand | Datamax O'Neil |
| Model | H-4310X |
| Print Technology | Thermal Transfer / Direct Thermal |
| Print Resolution | 203 dpi (8 dots/mm) |
| Print Speed | Up to 10 inches per second |
| Max Print Width | 4.1 inches (104 mm) |
| Max Print Length | 39 inches (991 mm) |
| Media Types | Labels, tags, receipts, tickets |
| Media Width | 0.75 to 4.65 inches (19-118 mm) |
| Connectivity | USB 2.0, Serial RS-232, Parallel, Ethernet |
| Memory | 8 MB Flash, 16 MB SDRAM |
| Display | 2-line LCD with backlight |
| Barcode Symbologies | Code 39, Code 128, UPC, EAN, PDF417, QR Code, etc. |
| Power Supply | 100-240 VAC, 50-60 Hz, auto-switching |
| Dimensions (W x D x H) | 10.5 x 9.5 x 7.5 inches (267 x 241 x 191 mm) |
| Weight | 15 lbs (6.8 kg) |
| Operating Temperature | 40°F to 100°F (5°C to 38°C) |
| Maintenance | Regular cleaning of print head and platen roller with isopropyl alcohol |
| Safety Certifications | UL, CSA, FCC Class A |
| Spare Parts | Print head, platen roller, cutter (optional), power supply |
Frequently Asked Questions - H-4310X Datamax O'Neil
How do I load labels into the Datamax O'Neil H-4310X?
Open the top cover, release the media guide, insert the label roll with the printable side facing up, route the label strip under the platen roller, close the media guide and cover, then press the feed button to align.
What type of ribbon does the H-4310X use?
The H-4310X supports wax, wax/resin, and resin ribbons for thermal transfer printing. Ensure the ribbon is 1.5 inches (38 mm) inner diameter and up to 4.3 inches wide.
How to clean the print head?
Turn off the printer, open the top cover, and use a cotton swab moistened with 99% isopropyl alcohol to gently wipe the print head. Allow it to dry completely before printing.
Why is my printer printing blank labels?
Check if the ribbon is installed correctly (for thermal transfer), ensure the print head latch is closed, and verify that the media has the correct coating. Also check the darkness setting in the printer driver.
How do I connect the H-4310X to my computer?
Use a USB cable (A to B) to connect to a USB port, or use the serial or parallel port. Install the appropriate driver from Datamax O'Neil's website. For Ethernet, configure the IP address via the printer's menu.
What software is compatible with the H-4310X?
The printer is compatible with NiceLabel, BarTender, Loftware, and most label design software using Windows drivers. It also supports ZPL and DPL command languages.
How to adjust the print darkness?
Press the Menu button, navigate to 'Printer Settings' > 'Darkness', then increase or decrease the value using the arrow keys. Test print a label to verify.
What is the maximum label length?
The maximum print length is 39 inches (991 mm) using the standard memory. For longer labels, you may need to reduce resolution or use a different command mode.
How do I perform a factory reset?
Turn off the printer, hold the Feed button while powering on, and continue holding until the status light blinks. Release the button to reset to factory defaults.
Where can I find spare parts for the H-4310X?
Contact Datamax O'Neil authorized distributors or visit the official website. Common spare parts include the print head (part #xxxx), platen roller (part #yyyy), and power supply (part #zzzz).
User questions about H-4310X Datamax O'Neil
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Label printer in PDF format for free! Find your manual H-4310X - Datamax O'Neil and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H-4310X by Datamax O'Neil.