TS-419P - NAS QNAP - Free user manual and instructions
Find the device manual for free TS-419P QNAP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) |
| Brand | QNAP |
| Model | TS-419P |
| Number of Bays | 4 |
| Supported Hard Drives | 4 x 3.5" SATA I/II (hot-swappable) |
| Processor | Marvell 1.2GHz |
| System Memory | 512MB DDR2 RAM (non-upgradable) |
| Flash Memory | 128MB DOM |
| Ethernet Ports | 2 x Gigabit RJ45 |
| USB Ports | 5 x USB 2.0 (2 front, 3 back) |
| Dimensions (HxWxD) | 177 x 180 x 235 mm |
| Weight (without HDDs) | 3.15 kg |
| Power Supply | External 36W AC adapter |
| Power Consumption | 20W (idle), 26W (in operation) |
| Cooling Fan | 1 x 7cm smart fan |
| RAID Levels Supported | JBOD, RAID 0, 1, 5, 6, 10 |
| Supported File Systems | EXT3, EXT4, NTFS, FAT32, HFS+ |
| Operating System | QTS 4.0 (Linux-based) |
| Management Interface | Web-based (Qfinder Pro, Cloud Key) |
| Security Features | AES 256-bit volume encryption, SSL/TLS, IP blocking |
| Maintenance | Clean with dry cloth; avoid liquids. Keep vents clear. |
| Repairability | Hard drives and fan user-replaceable; RAM soldered |
| Package Contents | NAS unit, power adapter, Ethernet cable, screws, quick installation guide |
Frequently Asked Questions - TS-419P QNAP
How do I access the TS-419P for the first time?
Install Qfinder Pro on a computer connected to the same network. Run Qfinder to discover the NAS and follow the setup wizard to initialize disks and set up admin password.
What RAID configurations does the TS-419P support?
It supports JBOD, RAID 0, 1, 5, 6, and 10. RAID 6 requires at least 4 drives, RAID 10 requires 4 drives, RAID 5 requires 3 drives.
Can I upgrade the RAM on the TS-419P?
No, the 512MB DDR2 RAM is soldered to the board and cannot be upgraded. The model is designed for basic home and small office use.
How to replace a failed hard drive?
Remove the front panel, pull out the failed drive tray, insert a new SATA drive (same or larger capacity), return the tray, and rebuild the RAID via the Storage Manager in QTS.
What is the maximum capacity of the TS-419P?
With 4-bays and support for up to 4TB per drive (SATA II), maximum raw capacity is 16TB. Actual usable capacity depends on RAID level.
Does the TS-419P support AES encryption?
Yes, it supports AES 256-bit volume encryption for folders and shared folders, selectable during creation.
How to update the firmware?
Log into QTS as admin, go to Control Panel > System > Firmware Update. Choose online update or upload a downloaded firmware file. Reboot after update.
What backup options are available?
Use QNAP's NetBak Replicator for Windows PCs, Rsync for remote backups, or 3rd party software via network mount. The NAS also supports snapshot technology on some volumes.
Can I use external USB drives with the TS-419P?
Yes, there are 5 USB 2.0 ports. Connect external drives to back up or expand storage. Go to Storage Manager to mount them.
How to clean and maintain the TS-419P?
Turn off the unit and unplug. Use a soft dry cloth to wipe the exterior. Clean the fan grille periodically with compressed air to prevent overheating.
User questions about TS-419P QNAP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual TS-419P - QNAP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS-419P by QNAP.