Whiteout X2 - Keyboard Savio - Free user manual and instructions

USER MANUAL Whiteout X2 Savio

Information of the utilization

of electrical and electronic equipment

This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get into air, soil and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protection by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.

Thank you for choosing Savio product!

If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.

If there is something that we could improve on our products, please write to us at [e-mail]

Thanks to your feedback, we will be able to better adapt the product to your expectations.

Before starting the use of purchased device it is recommended to read the whole manual.

1. Keyboard's main features:

- 60% type keyboard.

- OUTEMU Red / Brown / Blue switches (depending on the model).

• Hot swap (exchangeable switches).

- RGB backlight with 18 modes to choose from.

- Switch lifespan: 50 000 000 keystrokes.

- Keys are made with 'double injection' technology. It prevents wearing off the keys while using.

- N-key rollover & Anti-ghosting – a feature enabling pressing many keys at the same time.

- Functional balance and rubberized keyboard feet preventing unnecessary movement while using.

- Two-step rubber leg stands enable finding the ideal keyboard angle.

• Dedicated software allows full backlighting configuration and creating macros.

- Detachable USB-C braided cable.

2. Package contents:

- Mechanical keyboard

- User manual

- USB-A - USB-C cable

• Keycap and switch puller

3. Technical specification:

• Keyboard type: Mechanical

• Keyboard layout: US (61 keys)

- Interface: USB

- Keycaps: ABS

- Switches: OUTEMU Red / Brown / Blue (depending on the model)

- Switch lifespan: 50 000 000 keystrokes

- Hot Swap: Yes

• Keyboard dimensions: 292 × 102 × 39 mm

• Keyboard weight: 570 ± 20 g

- Software: Yes

• N-key rollover & Anti-ghosting: Full

- Macro support: Yes

• Cable length: 1.5 m

- Compatibility: Windows XP, Vista, Win 7 / 8 / 10 / 11, Linux, macOS, Android

4. Device installation:

4.1 Connect the keyboard with the cable added to the set to the USB-C port in the keyboard and USB-A port in the computer. The system will automatically recognise, download and install drivers.

4.2 The keyboard is ready to use.

5. Software installation:

To get full configuration access you have to download and install dedicated software from our website: www.savio.pl/download. After the download, double-click on the icon and follow the suggestions. After the successful installation, you will see the software icon on the desktop. Double click the icon to open the settings interface.

1. Multimedia activation key shortcuts:

Fn	+	H *	Volume down	Fn	+	U [u]	Screen lock
Fn	-	N *	Volume up	Fn	+	I [u]	Pause
Fn	+	V *	Mute	Fn	+	J [u]	Insert
Fn	+	Z **	Previous track	Fn	+	K [u]	Home
Fn	+	X **	Next track	Fn	+	L [u]	Page up
Fn	+	C **	Play / Pause	Fn	+	M [u]	Delete
Fn	-	Tab *	Restore to default settings	Fn	+	I < ln	End
Fn	+	Y **	Print screen	Fn	+	> ln	Page down

7. Backlighting mode:

To turn on / off backlight, press FN + ]}. The keyboard has 18 backlighting modes. To change backlight mode press FN + \l. To change the backlight color, press FN + O. The keyboard also allows to increase / decrease backlight intensity by pressing FN + [ { / FN + P. You can also increase / decrease backlight effect speed by pressing FN + " / FN + ::

Fn \\ _ + 1 \\ 0 \\ s	Backlight on / off
Fn \\ _ + 1s \\ s	Change backlight mode
Fn \\ _ + 0 \\ 0 \\ s	Change backlight color
Fn \\ _ + t \\ s	Increase backlight intensity
Fn \\ _ + p \\ s	Decrease backlight intensity
Fn \\ _ + t \\ s	Increase effect speed
Fn \\ _ + 1 \\ s	Decrease effect speed

8. Blocking the Windows key:

To block WINDOWS key press FN + WINDOWS. If the WINDOWS key lights up, it means that it is blocked and deactivated. To go back to the previous setting, press FN + WINDOWS again. The Windows key will stop glowing and will no longer be blocked.

Fn + Win

1. Turning on / off the arrow function with the key combination:

To turn on / off the arrow function with a key combination, press FN + W.

Fn + W +

In this mode, keys below will work as follows:

	Arrow up Arrow left
	Arrow down Arrow right	Ctrl+

To exit arrow function, press FN + W.

10. Keyboard default settings:

To restart the keyboard, press FN + Tab for about 3 seconds.

Fn + Tab

11. Hot swap:

The keyboard is equipped with hot swap, which means that you can replace original Outemu switches with desired switches to personalize the keyboards' functionality and comfort of use.

11.1 In order to remove keycap, use keycap puller ①.

11.2 In order to remove switch, use switch puller ②.

1. Safety conditions:

2. Use the product in accordance with its intended use, as improper use may damage the product.

3. Do not expose the device to moisture, heat or sunlight, do not use the product in a dusty environment.
4. The device should be cleaned only with a dry cloth.
5. Independent repairs and modification result automatic loss of the warranty.
6. Hitting or dropping may damage the product.

Savio

The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. Warranty card is available for download on our website: www.savio.pl/en/service

Gwarancja:

Information for customers and contractors and communication regarding complaints:

Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016 / 679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at Al. Żolnierzy I Armii WP 20B; 35-301 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., Al. Żolnierzy I Armii WP 20B; 35-301 Rzeszów, via e-mail address: [e-mail], and by phone at [phone]. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator's legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.