MV8M-90WV2N8 - Heat pump MIDEA - Free user manual and instructions
Find the device manual for free MV8M-90WV2N8 MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Heat Pump |
| Model | MV8M-90WV2N8 |
| Brand | Midea |
| Cooling Capacity (BTU/h) | 9000 |
| Heating Capacity (BTU/h) | 10000 (approximately) |
| Energy Efficiency Ratio (EER) | 12.0 (estimated) |
| Power Supply | 220-240V, 50Hz, 1Ph |
| Refrigerant Type | R32 |
| Indoor Unit Dimensions (WxHxD) | Approx. 800 x 290 x 210 mm |
| Outdoor Unit Dimensions (WxHxD) | Approx. 750 x 550 x 300 mm |
| Indoor Unit Weight | Approx. 10 kg |
| Outdoor Unit Weight | Approx. 30 kg |
| Maximum Pipe Length | 15 m |
| Maximum Height Difference | 10 m |
| Operating Temperature Range (Cooling) | -15°C to 50°C |
| Operating Temperature Range (Heating) | -15°C to 30°C |
| Noise Level Indoor (Low/High) | 24/45 dB(A) (estimated) |
| Noise Level Outdoor | 55 dB(A) (estimated) |
| Key Features | Turbo Cool/Heat, Self-Cleaning, Sleep Mode, 24-Hour Timer |
| Maintenance | Clean air filters every 2 weeks, check condensate drain annually |
| Safety | Overheating protection, short circuit protection, auto restart |
| Spare Parts Availability | Standard filters, remote control, sensors (contact Midea service) |
| User Manual Pages | 77 |
Frequently Asked Questions - MV8M-90WV2N8 MIDEA
How do I clean the air filters?
Open the front panel, remove the filters, and wash them with mild detergent and water. Allow them to dry completely before reinstalling. Clean every two weeks for optimal performance.
What does error code E1 mean?
Error E1 indicates a failure of the indoor temperature sensor. Turn off the unit and contact Midea service for replacement.
Can I install the heat pump myself?
No, installation must be performed by a qualified technician to ensure proper refrigerant handling, electrical connections, and drainage.
How do I use the timer function?
Press the Timer button on the remote control. Set the desired time using +/- buttons, and press again to confirm. The unit will turn on/off accordingly.
What is the recommended temperature setting for cooling?
For energy efficiency, set the thermostat to 24-26°C (75-78°F) during cooling mode.
How often should I service the heat pump?
Professional maintenance is recommended annually before peak usage season, including coil cleaning and refrigerant check.
Why is the unit not heating properly?
Check if the thermostat is set to a higher temperature than room temperature. Also ensure the filters are clean and outdoor unit is not obstructed. If issue persists, contact service.
Can I use an extension cord?
No, never use an extension cord. The unit must be plugged directly into a dedicated outlet with proper grounding.
How do I reset the remote control?
Remove the batteries, press any button for 5 seconds, then reinsert the batteries. If issues persist, replace batteries with new ones.
Is there a warranty for this product?
Yes, Midea offers a limited warranty. Check your purchase receipt or contact Midea customer service for warranty terms (typically 1-5 years depending on region).
User questions about MV8M-90WV2N8 MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual MV8M-90WV2N8 - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MV8M-90WV2N8 by MIDEA.
