FRANKE Verona TA7311 - Faucets

Verona TA7311 - Faucets FRANKE - Free user manual and instructions

Find the device manual for free Verona TA7311 FRANKE in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice FRANKE Verona TA7311 - page 13
Pick your language and provide your email: we'll send you a specifically translated version.
Produit Type Kitchen Faucet with Pull-Down Spray
Brand Franke
Model Verona TA7311
Finish Chrome (standard)
Other finishes may exist
Installation Type Deck-Mount, Single-Hole
Spout Type High Arc with 360-Degree Swivel
Spray Head Type Pull-Down with Dual Function (Stream and Spray)
Control Handle Type Single Lever
Valve Type Ceramic Disc Cartridge
Overall Height Approx. 16.5 inches (420 mm)
Spout Reach Approx. 8.5 inches (215 mm)
Net Weight Approx. 4.4 lbs (2.0 kg)
Water Supply Connection 1/2-inch NPSM male threads
Max Water Pressure 80 psi (5.5 bar)
Max Water Temperature 185°F (85°C)
Flow Rate 1.8 GPM (6.8 L/min) at 60 psi
Hose Length Approx. 24 inches (610 mm) pull-down hose
Included Accessories Faucet body, spray head, flexible supply hoses, mounting hardware, installation manual
Care & Cleaning Wipe with mild soap and water; avoid abrasive cleaners
Warranty Limited Lifetime (residential); 1 year (commercial)
Spare Parts Availability Cartridge assembly, spray head, hose, aerator available
Repairability Designed for easy cartridge replacement without removing faucet

Frequently Asked Questions - Verona TA7311 FRANKE

How do I install the Franke Verona TA7311 faucet?
Installation is straightforward for DIY enthusiasts. The faucet comes with a deck-plate for single-hole or three-hole setups. Ensure you have enough clearance under the sink for the supply lines and pull-down hose. Follow the included manual step-by-step. For detailed instructions, refer to the installation guide.
Is the Verona TA7311 compatible with standard 1/2-inch water supply lines?
Yes, the faucet connects to standard 1/2-inch NPSM male threads. It includes flexible supply hoses with 3/8-inch compression fittings that attach directly to standard shut-off valves.
How do I change between stream and spray modes?
Simply press the button on the back of the pull-down spray head to switch between a smooth stream and a powerful spray. The dual-function nozzle provides flexibility for various kitchen tasks.
What is the maximum hot water temperature the faucet can handle?
The faucet is rated for hot water up to 185°F (85°C). Always ensure your water heater thermostat does not exceed this limit to prevent damage.
How do I clean the Franke Verona TA7311?
Clean with a soft cloth and mild soapy water. Rinse and dry thoroughly. Avoid harsh chemicals, abrasive pads, or cleaners containing chlorine bleach, which can damage the finish.
Can the spout swivel?
Yes, the high-arc spout can swivel 360 degrees, allowing you ample range of motion for filling pots and cleaning the sink.
What is the warranty on this faucet?
Franke offers a Limited Lifetime Warranty for residential use. For commercial applications, the warranty is one year. Proof of purchase is required.
How do I replace the cartridge?
First, shut off water supply. Remove the handle by unscrewing the set screw under the handle cap. Unscrew the cartridge retaining nut, then pull out the old cartridge. Insert the new cartridge, reassemble, and turn on water. Check for leaks. Always use a genuine Franke cartridge.
Does the faucet come with a soap dispenser or side spray?
No, the Verona TA7311 is a standalone pull-down kitchen faucet. It does not include a side spray or soap dispenser. However, it can be installed with additional accessories through separate deck holes.
What is the flow rate of this faucet?
The faucet has a flow rate of 1.8 gallons per minute (6.8 liters per minute) at 60 psi, complying with water efficiency standards.

User questions about Verona TA7311 FRANKE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Faucets in PDF format for free! Find your manual Verona TA7311 - FRANKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Verona TA7311 by FRANKE.

USER MANUAL Verona TA7311 FRANKE

natural_image Line drawing of a kitchen sink with curved arm and handle (no text or symbols)

FRANKE Verona TA7311 - 1

natural_image Line drawing of a standard kitchen faucet with curved handle and side sink (no text or symbols)

TA7311 TA7311B TA7600 TA7600MB

EN Installation and service manual Kitchen Faucet

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 1

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 2

A Tap Verona Swivel Side HP

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 3

natural_image Line drawing of a kitchen faucet with a 360-degree angle indicator (no text or symbols beyond the angle label)

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 4

Tap Verona Pull Down Nozzle Side

Diagram illustrating the angle of a kitchen sink with an arrow indicating rotation, showing a 180° increase from the main pipe.

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 6

Diagram of a U-shaped pipe with a prohibition symbol indicating no leakage or disinfection

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 8

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 9

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 10

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 11

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 12

375 238 112 Ø 24 Ø 34 Ø 38 Ø 49.5 222 33 Max.

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 14

418 207 112 Ø 24 Ø 34 Ø 38 Ø 49.5 224 45 Max.

1 No Off

2 3 A2 mm B13 mm >20 mm

3 A
R max > 50 mm 19 mm

3 B 14 mm R max ≥ 50 mm 19 mm

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 20

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 21

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 22

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 23

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 24

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 25

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 26

natural_image Simple line drawing of two figures reviewing a document together (no text or symbols)

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 27

flowchart
graph LR
    A["Document"] --> B["Output"]

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 28

franke.com

FRANKE Verona TA7311 - TA7311 TA7311B TA7600 TA7600MB - 29

Periodic checks

▶ Check connection and shower hoses periodically for the following:

- watertightness,

- corrosion,

- mechanical damage;

▶ Use original spare parts only.

▶ Replace damp or dripping hoses.

▶ Replace hoses with rusty or oxidized surfaces.

▶ Replace hoses that show signs of mechanical damage.

▶ Flush all pipes thoroughly before installation.

Operating data Value

Operating pressure (ideal) 3 bar 45 PSI 300 kPa
Operating pressure (max.)* 5 bar 70 PSI 500 kPa
Operating pressure (min.)* 1 bar 14.5 PSI 100 kPa
Water temperature (ideal) 60°C 140°F
Water temperature (max.) 70°C 158°F

* Equal pressure is recommended.

FRANKE Verona TA7311 - Periodic checks - 1

flowchart
graph TD
    A["Input Hand Icon"] --> B["Processing Ring"]
    B --> C{Environmental Change}
    C --> D["Output Hand Icon"]
    D --> E["Feedback Loop"]
    E --> F["Output Hand Icon"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#ffc,stroke:#333

Diagram illustrating three mechanical or thermal device states with labeled components and directional arrows indicating movement or force.

50% 100%

Exploded view diagram of a showerdown sink assembly with numbered parts for identification

Exploded view diagram of a showerdown sink assembly with numbered parts for identification

Australian Consumer Guarantees

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Express Warranty Details

As well as your consumer guarantees under the Australian Consumer Law, Franke Australia Pty Ltd ACN 138 663 279 (Franke Australia) offers original purchasers of the Products (Customer or you) the additional express warranty described in this document (Express Warranty) in respect of Franke Tap's used in a domestic/residential setting (Product).

The benefits provided under this Express Warranty are additional to other rights and remedies available to the Customer under the Australian Consumer Law and do not derogate or reduce your rights under the Australian Consumer Law.

The conditions, limitations and exclusions that apply to this Express Warranty are set out in this document.

This Express Warranty is not transferable and is given to Customers when the Product is used in a domestic or residential setting.

Term of the Express Warranty

The Express Warranty is valid for 5 years parts and labour on the tap and, a further 10 years part only warranty on the cartridge (Warranty Period).

Express Warranty

Subject to the terms set out in this document, Franke Australia warrants to Customers that the Product will be free from defects in materials and workmanship during the Warranty Period.

If the Product fails to operate or is defective during the Warranty Period under normal operating conditions as a result of a defect in materials or workmanship, subject to the exceptions set out under the heading Conditions below, Franke Australia will, at its discretion either:

- replace the Product or a component of the Product; or - repair the Product or a component of the Product using new, used or refurbished replacement parts.

▶ repair the Product or a component of the Product using new, used or refurbished replacement parts.

Conditions

This Express Warranty does not cover and expressly excludes:

▶ damage to the Product or a defect in or failure of the Product resulting directly or indirectly from any of the following:

- alteration, modification or disassembly of the Product; - the Product being used in a way for which it was not designed or in a manner contrary to the instructions provided with the Product (including in respect of maintenance of the Product);

- abuse, misuse, negligence, willful damage neglect or vandalism;

– corrosion from environmental conditions or chemical treatments;

- fire, accident or theft;

- damage caused while the Product is being transported (except by Franke Australia);

– external sources, including but not limited to blown fuses, power failure, faulty installation;

- natural disasters, or other ‘acts of God’, including but not limited to damage from flooding, drought, lightning, hurricanes, hail, windstorms, earthquakes, tornadoes, gales, cyclones or other causes beyond the control of Franke Australia; or

- normal wear and tear;

▶ scratching, denting, rusting, spotting, discolouration or tampering with the Product. Any imperfections in the finishes or in the natural materials used should not be considered as faults but a typical characteristic of these crafted products;

products:

– used in commercial settings;

- that were not installed in accordance with the manufacturer's installation instructions, by a qualified installer and licensed plumber or in accordance with any applicable standards published by Standards Australia that apply to the Product; or

– that were purchased second hand, at auction, or from a person other than an authorised representative of Franke Australia;

▶ maintenance or repair performed by unauthorised persons and/or use of spare parts that are not genuine;

▶ when the Customer cannot provide documentation evidencing date of purchase of the Product;

▶ incidental, indirect or consequential loss or damage including loss of or damage to property, injury to, illness or death of, any person in connection with a Product failure or defect; or

▶ product removal or re-installation costs, visits and calls of specialised technicians and costs borne by the Customer due to the unavailability and/or non-use of the Product.

the tap installation needs to be done in accordance with AS/NZS 3500.1-2003 (Clause 3.3.4) specifies 500kPa maximum water supply pressure at any outlet within a building for new installations;

▶ isolation stop taps are to be fitted as stated on manufacturer's installation instructions;

▶ pipes need to be flushed before the tap is installed to ensure that the tap is free of impurities.

The Remedy is the sole remedy under this Express Warranty.

Taps conform to AN/NZS6400:2016 Water Efficient Products – Rating and labelling standards.

Extra Representations

No representation or warranty by any person, including a Franke Australia employee or agent, shall be binding to the extent that they are inconsistent with or to the extent that the representation expands this Express Warranty unless expressly incorporated in writing in this document. This Express Warranty supersedes and overrides all prior agreements, representations and warranties made by Franke Australia and its authorised agents.

Making an Express Warranty Claim

If the Customer becomes aware, or ought reasonably be aware of any defect, damage or deterioration to the Product, the Customer must stop using the Product and promptly report it to Franke Australia within the Warranty Period.

To make a claim under this Express Warranty, please contact Franke Australia by submitting an enquiry HS-customercare.AU@franke.com or (03) 9700 9100 Australia: HS-customercare.NZ@franke.com or (09) 964 0400 New Zealand.

You will need to provide us with:

1) model number of your Product;
2) details of the problem you have experienced with the Product;
3) a copy of your original purchase receipt;
4) address details of where the product is installed;
5) and any relevant pictures can be attached if lodging the claim online.

Express Warranty claims received after the Warranty Period will not be accepted.

Expenses

Subject to the following terms, Franke Australia will provide the Remedy to the Customer at its cost:

▶ Franke Australia is not responsible for any associated or ancillary costs that you incur as a result of replacement or repair of your Product unless Franke Australia has given its prior written approval.
Where a claim has been made under this Express Warranty and the Product is located outside of a 50 km radius from any store where the Product can be purchased from an authorised retail (Warranty Area), you are responsible for the cost of delivery to the nearest service agent or the travel cost for a technician to travel to a location outside the Warranty Area.

Franke Australia Pty Ltd

83 Bangholme Road

Dandenong South, VIC 3175, Australia

Phone: 03 9700 9100

Email: HS-customercare.AU@franke.com

Website: www.prkws.com

P.O Box 53171 Auckland Airport

Auckland 2150 New Zealand

Phone: 09 964 0400

Email: HS-customercare.NZ@franke.com

Website: www.prkws.com

Australia

Franke Australia

Dandenong South VIC 3175

Phone: +61 3 9700 9100

New Zealand

Franke Australia

Dandenong South VIC 3175

Phone: +64 9 964 0400

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : FRANKE

Model : Verona TA7311

Category : Faucets