Nighthawk M2 MR2100A - Wi-Fi Access Point NETGEAR - Free user manual and instructions
Find the device manual for free Nighthawk M2 MR2100A NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mobile Wi-Fi Access Point |
| Brand | Netgear |
| Model | Nighthawk M2 MR2100A |
| Dimensions | 90 x 90 x 22 mm (3.54 x 3.54 x 0.87 in) |
| Weight | 280 g (9.88 oz) |
| Power Supply | Rechargeable battery 5040 mAh; USB-C charging |
| Battery Life | Up to 16 hours |
| Wireless Standards | 802.11 a/b/g/n/ac, dual-band (2.4 & 5 GHz) |
| Maximum Wireless Speed | Up to 1.2 Gbps |
| Mobile Connectivity | 4G LTE Advanced Pro, Category 18 |
| Ethernet Port | 1 x Gigabit Ethernet (RJ-45) |
| Display | 2.4 inch color touchscreen |
| Security | WPA2-PSK, VPN support |
| SIM Slot | 1 x Nano-SIM |
| USB Port | 1 x USB-C (charging/data), 1 x USB-A |
| Guest Network | Supported |
| Parental Controls | Via Smart Parental Controls (Circle) |
| LED Indicators | Power, Internet, Wi-Fi, Signal, Battery |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Warranty | 1 year limited |
| Maintenance & Cleaning | Wipe with a soft dry cloth; avoid liquids |
| Spare Parts & Repairability | Battery replaceable; not user serviceable except battery |
Frequently Asked Questions - Nighthawk M2 MR2100A NETGEAR
How do I set up my Netgear Nighthawk M2 for the first time?
Insert a valid nano-SIM card, press the power button, and connect to the Wi-Fi network shown on the touchscreen. Open a browser to complete the setup wizard.
Can I use the Nighthawk M2 as a wired router?
Yes, connect an Ethernet cable from the Gigabit port to a computer or switch to use it as a wired access point or router.
How long does the battery last?
The 5040 mAh battery provides up to 16 hours of continuous usage under moderate conditions.
How do I reset the device to factory settings?
With the device on, use a paperclip to press and hold the reset button on the bottom for 10 seconds until the LEDs flash.
Does the Nighthawk M2 support 5 GHz Wi-Fi?
Yes, it supports dual-band Wi-Fi with simultaneous 2.4 GHz and 5 GHz connections.
How many devices can connect simultaneously?
Up to 20 devices can be connected via Wi-Fi and Ethernet combined.
What security protocols are supported?
It supports WPA2-PSK encryption and can be used with VPN services for added security.
Can I use an external antenna?
No, the Nighthawk M2 has internal antennas only. Do not attempt to modify.
How do I update the firmware?
Go to Settings > About > Firmware Update on the touchscreen or log in to the web interface to check for updates.
What type of SIM card is required?
A nano-SIM card from a compatible mobile network operator is required for cellular connectivity.
User questions about Nighthawk M2 MR2100A NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi Access Point in PDF format for free! Find your manual Nighthawk M2 MR2100A - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Nighthawk M2 MR2100A by NETGEAR.
