Boardwalk 6010 - Faucet Moen - Free user manual and instructions

USER MANUAL Boardwalk 6010 Moen

Please Contact Moen First

For Installation Help, Missing or Replacement Parts

(USA)

1-800-BUY-MOEN (1-800-289-6636)

Mon - Fri 8:00 AM to 7:00 PM, Eastern

Sat. 9:00 AM to 3:00 PM Eastern

WWW.MOEN.COM

(Canada)

1-800-465-6130

Mon - Fri 7:30 AM to 7:00 PM, Eastern

WWW.MOEN.CA

For safety and ease of faucet replacement, Moen recommends the use of these helpful tools.

HERRAMIENTAS ÚTILES

Line drawing of two wrenches, one open and one wide, shown without any text or symbols.

or/ou

m = 311

Sealant

Sellante

Mastic

Thread seal tape

Line drawing of two different types of adjustable wrenches (no text or symbols present)

or/ou

m = 311

Sealant

Sellante

Mastic

Parts List

A. Faucet Body

B.* Gasket

C. Aerator Tool

D. Mounting Nut (x2)

E. ^▲ Co-union Nuts (x2)

F. Handle Caps (x2)

G. Red Color Indicator

H. Blue Color Indicator

I. Lift Rod

J. Lift Rod Strap

K. Pivot Rod Clip

L. Pivot Rod Nut

M. Pivot Rod

N. Pivot Rod Seat

1. Waste Plug

P. Waste Seat

Q. Drain Gasket

R. Washer

S. Drain Nut

Lista de piezas

▲ Not included in all models

▲ Not included in all models

Always turn water supply OFF before removing existing faucet or disassembling the valve. Open faucet handle to relieve water pressure and ensure that complete water shut-off has been accomplished.

50/50 Waste Assembly / Conjunto de desagüe 50/50 / Assemblage de bonde 50/50

1. Attach the Mounting Nuts (D) to the hot and cold threaded mounting shanks.
2. Tighten faucet to sink.
3. Conecte las tuercas de montaje (D) a los tubos roscados de montaje caliente y frío.
4. Apriete la mezcladora al fregadero.
5. Fixer les écrous de montage (D) sur les tiges de montage filetées d'eau chaude et d'eau froide.
6. Fixer le robinet au lavabo.

1. Attach supply lines (not included) to Faucet Body (A).
2. Tighten with wrench.
3. Conecte las líneas de suministro (no incluidas) al cuerpo de la mezcladora (A).
4. Apriete con una llave.
5. Attacher les conduites d'alimentation (non comprises) sur le corps du robinet (A).
6. Serrer avec une clé.

1. Clean drain opening in the bottom of sink.
2. Apply a generous amount of sealant to the underside of the Waste Seat (P).
3. Limpie la abertura del desagüe en el fondo del fregadero.
4. Aplique una cantidad generosa de sellador en la parte de abajo del asiento del desagüe (P).
5. Nettoyer l'ouverture de la bonde au fond de l'évier.
6. Appliquer une bonne quantité de mastic sous le siège de bonde (P).

Install Lift Rod (I) for metal waste assembly or (V) ^† for 50/50 waste assembly into Faucet Body (A).

Verify white plastic Pivot Rod Seat (N) is in place with beveled side facing out. The Pivot Rod (M) can be installed in two ways. Circle illustration shows the Pivot Rod (M) next to hole in Waste Plug (O). This allows the Waste Plug (O) to be pulled out for cleaning. Box illustration shows the Pivot Rod (M) inserted into the hole in the Waste Plug (O). This prevents the Waste Plug (O) from being easily removed after installation.

Insert Plug (BB) ^† into Waste Seat (CC) ^† .

Verify white plastic Pivot Rod Seat (AA) ⁺ is in place with beveled side facing out. The Pivot Rod (Y) can be installed in two ways. Circle illustration shows the Pivot Rod (Y) ⁺ next to hole in Waste Plug (BB) ⁺ . This allows the Waste Plug (BB) to be pulled out for cleaning. Box illustration shows the Pivot Rod (Y) ⁺ inserted into the hole in the Waste Plug (BB) ⁺ . This prevents the Waste Plug (BB) from being easily removed after installation. Attach Pivot Rod Nut (Z) ⁺ onto Pivot Rod (Y) ⁺ and onto Tailpiece (HH) ⁺ .

To flush debris from the plumbing system: Remove the aerator by unthreading by hand or by using the included aerator tool (C) provided with select models. Run hot and cold water for 15 seconds. Turn off water. Replace the aerator.

Moen products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the "Warranty Period" for homeowners), that this faucet will be leak- and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship. All other purchasers (including purchasers for industrial, commercial and business use) are warranted for a period of 5 years from the original date of purchase (the "Warranty Period" for non-homeowners).

If this faucet should ever develop a leak or drip during the Warranty Period, Moen will FREE OF CHARGE provide the parts necessary to put the faucet back in good working condition and will replace FREE OF CHARGE any part or finish that proves defective in material and manufacturing workmanship, under normal installation, use and service. Replacement parts may be obtained by calling 1-800-289-6636 (Canada 1-800-465-6130), or by writing to the address shown. Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims. Defects or damage caused by the use of other than genuine Moen parts is not covered by this warranty. This warranty is applicable only to faucets purchased after December, 1995 and shall be effective from the date of purchase as shown on purchaser's receipt.

This warranty is extensive in that it covers replacement of all defective parts and finishes. However, damage due to installation error, product abuse, product misuse, or use of cleaners containing abrasives, alcohol or other organic solvents, whether performed by a contractor, service company, or yourself, are excluded from this warranty. Moen will not be responsible for labor charges and/or damage incurred in installation, repair or replacement, nor for any indirect, incidental or consequential damages, losses, injury or costs of any nature relating to this faucet. Except as provided by law, this warranty is in lieu of and excludes all other warranties, conditions and guarantees, whether expressed or implied, statutory or otherwise, including without restriction those of merchantability or of fitness for use.

Some states, provinces and nations do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state, province to province, nation to nation. Moen will advise you of the procedure to follow in making warranty claims. Simply write to Moen Incorporated using the address below. Explain the defect and include proof of purchase and your name, address, area code and telephone number.

North Olmsted, Ohio 44070-8022

U.S.A.

MOEN

Buy it for looks. Buy it for life.*

Moen de Mexico, S.A. de C.V.

Carretera Saltillo-Monterrey KM 14.7

Ramos Arizpe, Coahuila

Mexico 25900

Moen Inc.

2816 Bristol Circle

Oakville, Ontario L6H 5S7

Canada

INS1921F-6/16

©2016 Moen Incorporated