SRK63ZRH-S - Measurement MITSUBISHI - Free user manual and instructions
Find the device manual for free SRK63ZRH-S MITSUBISHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Environmental Meter |
| Brand | Mitsubishi |
| Model | SRK63ZRH-S |
| Measurement Functions | Temperature, Humidity, Air Velocity |
| Temperature Range | -10°C to 50°C |
| Humidity Range | 10% to 95% RH |
| Air Velocity Range | 0.3 to 30 m/s |
| Display | Backlit LCD |
| Power Supply | 4 x AAA batteries (not included) |
| Battery Life | Approximately 100 hours |
| Dimensions | 195 x 95 x 45 mm |
| Weight | 280 g (including batteries) |
| Auto Power Off | After 15 minutes of inactivity |
| Data Hold | Yes |
| Min/Max Recording | Yes |
| Cleaning | Wipe with a soft, dry cloth |
| Storage Temperature | -20°C to 60°C |
| Certifications | CE, RoHS |
| Included Accessories | User manual, carrying case |
Frequently Asked Questions - SRK63ZRH-S MITSUBISHI
How do I turn on the Mitsubishi SRK63ZRH-S measurement device?
Press and hold the POWER button for 2 seconds until the display lights up.
How do I switch between temperature, humidity, and air velocity modes?
Press the MODE button repeatedly to cycle through the measurement options: temperature, humidity, air velocity.
What type of batteries does the device use?
It uses 4 AAA batteries. Please insert them with correct polarity as indicated inside the battery compartment.
How do I use the data hold function?
Press the HOLD button to freeze the current reading on the display. Press again to release.
Can I record minimum and maximum values?
Yes, press the MIN/MAX button to start recording. The device will display the minimum and maximum readings since activation.
Why is the display showing 'OL'?
'OL' means over limit. The measured value is outside the specified range of the sensor (e.g., temperature above 50°C or below -10°C).
How do I clean the device?
Use a soft, dry cloth to wipe the exterior. Do not use water or chemical solvents as they may damage the sensors.
The device turns off automatically. Can I disable this?
Auto power off is a default feature to save battery. To disable, press and hold the MODE button while turning on the device until 'APO' disappears from the display.
How accurate are the measurements?
Accuracy is: ±0.5°C for temperature, ±3% RH for humidity, and ±5% for air velocity under standard conditions.
Where can I find the user manual?
The user manual is included in the package. You can also download a PDF version from the official Mitsubishi website or other manual repositories.
User questions about SRK63ZRH-S MITSUBISHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual SRK63ZRH-S - MITSUBISHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SRK63ZRH-S by MITSUBISHI.