GC1710 - Cooker Khind - Free user manual and instructions
Find the device manual for free GC1710 Khind in PDF.
User questions about GC1710 Khind
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Cooker in PDF format for free! Find your manual GC1710 - Khind and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GC1710 by Khind.
USER MANUAL GC1710 Khind
Please read this manual carefully before operating this product. Keep this manual handy for further reference. 请在使用此产品前,详读此说明书。并将之收藏以作日后参考。
This manual is also available online
Safety Precaution Information
This appliance shall be installed in accordance with the regulations in force and only used in a well ventilated space. Read the instructions before installing or using this appliance.
Safety & warning information
-
Gas used is LPG.
-
Use only approved Low Pressure Regulator.


- Use only hose specially made for Liquefied Petroleum Gas supplies and the hose must not crack due to aging. The hose must not come into contact with any part of the gas cooker body.
- Before using, check to ensure that the trivet stand are placed correctly.
- Do not use this appliance for drying clothes, etc.
- Always maintain proper ventilation in cooking area at all times.
- If a gas leak is found, stop the gas supply by turning the regulator control lever upward. Open all windows for ventilation. Do not light matches or use a lighter and refrain from turning electrical switches on and off during this period. Contact a qualified technician immediately.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Turn off the appliance whenever not in use.
- Do not put flammable items on top of this appliance.
- Do not touch metal parts of the appliance and the middle area of the top surface during and after cooking as these areas reach high temperature.
Cleaning & Maintenance
- Always allow the appliance to cool before cleaning.
- Use soft cloth with warm soap water for general cleaning.
- Do not use caustic solutions, washing soda, aerosol spray cleaners, bleach and other abrasive chemicals for cleaning.
- DO NOT attempt to clean burner surface when still hot.
Parts identification
1 Trivet Stand
2 Flame Adjustment Knob
Rubber Feet

*Pictures are for illustration purpose only.
Specifications
Model
GC6010 | GC1710
Burner Size
Left:100mm;Right:100mm
Product Category
: 13B/P(30)
Gas Type
: LPG
Gas Pressure
3000Pa/30mBar
Total Heat Input
6.4kW
Gas Power Consumption
* Specifications are subject to change without prior notice.
Installation
1.
Th
s a
oppl
an
ce
ho
uld
be
ins
tal
ed
by
a q
ua
fie
d p
ers
on
to


3.

Make sure the hose does not pass over or come in contact with the body of the appliance.
4.

Insert regulator onto outlet valve of LPG cylinder.
5.

Turn regulator control lever downward to release LPG into the appliance.
- After installation, test with soapy water for gas leaks.
- Do not use connecting hose that is longer than 2 metres.
- Ensure Minimum Clearance distance 150mm from the wall and 1 meter from the ceiling
How To Use
1.

Turn on the gas supply from the LPG cylinder by turning the regulator control lever downwards. Make sure the knob of the appliance is at off position.
2

Press the ignitor knob and turn it anti-clockwise. Continue to press the knob for 3-8 seconds, let go after the burner is on.
- Air may be accumulated in the gas hose during installation. You may have to repeat above procedure several times initially.
4.

For maximum cooking heat, turn Flame Adjustable Knob to "MAX" position.
5.

For maximum cooking heat, turn Flame Adjustable Knob to "MIN" position.
Troubleshooting
| Problems | Observation | Problem - Solving |
| Ignition Failed | a. The valve is not opened | Open the gas valve and supply the gas. |
| b. The rubber hose is bent | Straighten it or replace with a new hose. | |
| c. No gas in the cylinder | Replace with a new gas cylinder. | |
| d. The nozzle or the burner is blocked | Pass through the blockage with a wire. | |
| e. There is air inside the hose | Open the nozzle, and then release the air. | |
| Other Problems | a. There is gas leakage from the gas pipe | Please send to nearby service center. |
| b. The rubber hose is broken | Replace the rubber hose. | |
| c. There is no flame | Ignite again. |
△ 安全注意事项
*图片仅供参考。