IPC544SE-DK-I0 - Camera UniView - Free user manual and instructions
Find the device manual for free IPC544SE-DK-I0 UniView in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Camera |
| Brand | UniView |
| Model | IPC544SE-DK-I0 |
| Image Sensor | 1/2.7" Progressive Scan CMOS |
| Resolution | 5 Megapixels (2560x1920) |
| Lens | Fixed 2.8mm / 4mm (optional) |
| Field of View | Horizontal: 105° (2.8mm) / 80° (4mm) |
| Minimum Illumination | 0.005 lux (color), 0 lux with IR |
| Day/Night | ICR filter |
| IR Distance | Up to 30m |
| Video Compression | H.265, H.264, MJPEG |
| Frame Rate | 30fps at 5MP |
| Network | 10/100 Base-T Ethernet |
| Protocols | TCP/IP, UDP, HTTP, ONVIF |
| Storage | MicroSD card (up to 128GB) |
| Power Supply | PoE (802.3af) or DC 12V |
| Power Consumption | <6W |
| Dimensions | Ø 110mm x 95mm |
| Weight | 0.5 kg |
| Ingress Protection | IP67 |
| Operating Temperature | -30°C to 60°C |
| Intelligent Features | Motion detection, Tampering alarm, Line crossing |
| Maintenance | Clean lens with soft dry cloth; check connections periodically |
| Safety | Use provided power adapter; do not disassemble; keep away from moisture |
Frequently Asked Questions - IPC544SE-DK-I0 UniView
How do I reset the camera to factory defaults?
Press and hold the reset button (inside the vent or on the cable) for 10 seconds until the LED blinks. The camera will reboot with default settings.
How to access the camera remotely?
Connect the camera to your network. Use the UniView NVR or EZStation software, or directly via web browser (IP address). Ensure port forwarding is configured on your router for remote access.
What is the default username and password?
Default username is admin and password is 123456 (or blank on some models). Change these immediately for security reasons.
How do I change the camera's IP address?
Use the UniView IP Tool or EZTools to scan the network. Select the camera, then modify the IP address under Network Settings. Alternatively, access the web interface and go to Configuration > Network > Basic.
Can the camera record to a NAS or FTP?
Yes. Go to Configuration > Storage > FTP Server or NAS and enter the server details. The camera supports FTP upload and Samba/CIFS for network storage.
How do I enable motion detection?
Access the camera's web interface. Navigate to Configuration > Events > Motion Detection. Enable it, draw detection areas, and set sensitivity. Configure action rules like email alerts or recording.
What is the maximum SD card capacity supported?
The camera supports microSD cards up to 128GB (class 10 recommended). For continuous recording, use a high-endurance card.
How do I upgrade the firmware?
Download the latest firmware from UniView's official website. In the web interface, go to Configuration > Maintenance > Upgrade, select the firmware file and click Upgrade. Do not power off during upgrade.
The camera shows no image at night. What could be wrong?
Check if IR LEDs are enabled: go to Configuration > Image > Day/Night and set to Auto. Ensure the IR cut filter is working. If IR is weak, clean the glass and check IR power settings.
How do I view the camera on a smartphone?
Download the UniView Smart app (iOS/Android). Add the camera by scanning its QR code (on the device) or entering the UID (serial number). Connect via Wi-Fi or 4G for remote viewing.
User questions about IPC544SE-DK-I0 UniView
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Camera in PDF format for free! Find your manual IPC544SE-DK-I0 - UniView and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IPC544SE-DK-I0 by UniView.