HCP61422BH - Range hood BEKO - Free user manual and instructions
Find the device manual for free HCP61422BH BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range hood |
| Brand | Beko |
| Model | HCP61422BH |
| Dimensions (H x W x D) | 150 x 600 x 500 mm |
| Weight | 10 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Motor Power | 200 W |
| Extraction Capacity | 450 m³/h |
| Number of Speeds | 3 |
| Noise Level | 55 dB(A) |
| Lighting | LED, 2 x 3W |
| Filter Type | Aluminum mesh (washable) |
| Control Type | Slider |
| Installation Type | Built-in |
| Duct Diameter | 150 mm |
| Grease Filter Washable | Yes |
| Energy Efficiency Class | B |
| Annual Energy Consumption | 50 kWh |
Frequently Asked Questions - HCP61422BH BEKO
How do I clean the grease filter?
The aluminum mesh filter can be washed by hand with mild detergent or in the dishwasher. Ensure it is dry before reinstalling.
Can I use the hood without a duct?
Yes, this model can be used in recirculation mode with a charcoal filter (not included). For ducted mode, connect to a 150 mm duct.
How often should I replace the charcoal filter?
For recirculation mode, replace the charcoal filter every 3-6 months depending on usage.
What is the noise level at maximum speed?
The maximum noise level is 55 dB(A), which is comparable to a quiet conversation.
How do I install the hood?
The hood is designed for built-in installation. Follow the manual: mark the position, cut a hole in the cabinet, secure the hood, and connect the ductwork or electrical supply.
What should I do if the hood is not extracting properly?
Check that the filters are clean, the duct is not blocked, and the speed setting is appropriate. Also ensure the room has adequate ventilation for makeup air.
Is the lighting replaceable?
Yes, the LED lights can be replaced. Contact Beko service for compatible LED modules.
Can I use the hood over a gas stove?
Yes, it is suitable for use above gas cooktops. Maintain a minimum distance of 65 cm between the hob and the hood.
How do I reset the filter saturation indicator?
Press and hold the slider control for 3 seconds until the indicator light turns off.
What is the warranty period?
Beko offers a 2-year manufacturer warranty. Register your product online for extended warranty options.
User questions about HCP61422BH BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual HCP61422BH - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HCP61422BH by BEKO.