WT951 - Treadmills Horizon Fitness - Free user manual and instructions
Find the device manual for free WT951 Horizon Fitness in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Treadmill |
| Brand | Horizon Fitness |
| Model | WT951 |
| Display | 5-inch LCD with time, distance, speed, calories, pulse |
| Speed Range | 0.5 - 12 mph |
| Incline Range | 0% - 15% |
| Motor Power | 2.5 CHP |
| Running Surface | 20" x 60" |
| Maximum User Weight | 300 lbs |
| Product Dimensions (Unfolded) | 78" L x 35" W x 55" H |
| Product Dimensions (Folded) | 45" L x 35" W x 62" H |
| Product Weight | 250 lbs |
| Power Requirements | 120V, 15A |
| Foldable | Yes, with SoftDrop hydraulic system |
| Heart Rate Monitoring | Hand grip pulse sensors |
| Programs | 12 preset workout programs |
| Cooling Fan | Yes, dual speed |
| Audio System | MP3 compatible with 3W speakers |
| Safety Key | Included, emergency stop |
| Warranty | Frame: lifetime, Motor: 3 years, Parts & labor: 1 year |
| Maintenance | Lubricate belt every 3 months; clean after use |
| Spare Parts Available | Belt, motor, controller, deck, motor hood |
Frequently Asked Questions - WT951 Horizon Fitness
How do I fold the Horizon Fitness WT951 treadmill?
Ensure the treadmill is stopped and unplugged. Lift the deck until it locks into place using the SoftDrop hydraulic system. To unfold, release the lock and gently lower the deck.
What should I do if the treadmill stops suddenly during use?
First, check if the safety key is in place and properly attached. If the key is secure, inspect the power cord and outlet. If the issue persists, refer to the manual's troubleshooting section or contact customer support.
How do I calibrate the heart rate monitor?
The hand grip sensors are self-calibrating. Ensure your hands are clean and dry, grip the sensors firmly for about 10 seconds while a steady reading appears. No manual calibration is needed.
Can I use the treadmill without the safety key?
No, the safety key is essential for operation. It acts as an emergency stop. If misplaced, contact Horizon Fitness for a replacement.
What type of lubricant should I use on the belt?
Use only 100% silicone lubricant designed for treadmills. Apply a thin line under the belt while walking on it at low speed. Never use petroleum-based or multi-purpose oils.
How do I adjust the belt tension?
Locate the two hex bolts at the rear roller. Turn both bolts equally clockwise (½ turn at a time) to tighten the belt. Check that the belt is centered and has proper tension (should lift about 2-3 inches off the deck).
What does the 'Error Code E1' mean?
E1 typically indicates a motor control board issue. Unplug the treadmill for 30 seconds and restart. If the code reappears, contact customer service for a replacement controller.
Is the WT951 compatible with third-party apps?
The treadmill has an MP3 input but does not natively sync with apps. You can use an external device mount to follow workouts on your tablet or phone while using the treadmill's manual mode.
What is the recommended maintenance schedule?
Clean the deck and belt monthly. Lubricate the belt every 3 months. Inspect the power cord and safety key weekly. Annual professional servicing is recommended for mechanical parts.
How do I reset the treadmill to factory settings?
With the treadmill plugged in and the safety key inserted, press and hold both the Start and Stop buttons simultaneously for 5 seconds until the display shows 'RESET'. Confirm by pressing Start again.
User questions about WT951 Horizon Fitness
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Treadmills in PDF format for free! Find your manual WT951 - Horizon Fitness and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WT951 by Horizon Fitness.