LIFTB900 - Range hood SMEG - Free user manual and instructions
Find the device manual for free LIFTB900 SMEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Smeg |
| Model | LIFTB900 |
| Mounting Type | Island / Ceiling Mount |
| Width | 90 cm (approx.) |
| Depth | 60 cm (approx.) |
| Height (min-max) | 60 - 110 cm (approx.) |
| Weight | 25 kg (approx.) |
| Power Supply | 220-240 V ~ 50/60 Hz |
| Motor Power | 250 W (approx.) |
| Extraction Rate (Max) | 700 m³/h (approx.) |
| Noise Level (Max) | 65 dB(A) (approx.) |
| Number of Speeds | 3 + Boost |
| Lighting | LED strip, 2 x 3W |
| Filter Type | Grease filter (aluminum/mesh) |
| Charcoal Filter (Recirculation) | Optional, not included |
| Control Type | Touch or remote control (depending on model) |
| Ducting Diameter | 150 mm |
| Energy Class | B (approx.) |
| Annual Energy Consumption | 80 kWh/a (approx.) |
| Grease Filter Cleaning | Hand wash or dishwasher safe |
| Safety Features | Auto shut-off timer, motor overheat protection |
| Spare Parts Available | Filters, remote control, LED modules |
| Repairability Index | 7.5 / 10 (approx.) |
Frequently Asked Questions - LIFTB900 SMEG
How do I install the Smeg LIFTB900 range hood?
Installation should be performed by a qualified professional. Ensure the ceiling is reinforced to support the weight (approx. 25 kg). Follow the manual for electrical and ducting connections. The hood must be mounted at a minimum height of 65 cm above the hob.
How often should I clean the grease filters?
Clean the aluminum grease filters every 2-3 months, or more frequently with heavy use. They can be washed by hand with warm soapy water or in a dishwasher. Allow to dry completely before reinstalling.
Can the Smeg LIFTB900 be used in recirculation mode?
Yes, it can be used in recirculation mode by fitting optional charcoal filters (replace every 4-6 months). The hood comes pre-configured for extraction; you need to change the setting and install charcoal filters for recirculation.
What are the dimensions of the LIFTB900?
The approximate dimensions are: width 90 cm, depth 60 cm, and height adjustable from 60 to 110 cm. Always measure your space before installation.
How do I replace the LED lights?
The LED lights are integrated and may require professional replacement. Contact Smeg authorized service for assistance. Do not attempt to disassemble the hood yourself.
Is the remote control included?
The LIFTB900 model typically includes a remote control for convenient operation from a distance. Batteries are usually not included.
What is the noise level of this range hood?
At maximum speed, the noise level is approximately 65 dB(A). At lower speeds, it is quieter. Use boost mode sparingly to reduce noise.
How do I reset the filter alarm?
After cleaning or replacing filters, press and hold the boost button for 5 seconds until the indicator light turns off. This resets the alarm for the next cycle.
What should I do if the hood does not start?
Check the power supply and circuit breaker. Ensure the hood is properly connected. If using a remote control, replace the batteries. If the issue persists, contact Smeg customer service.
Where can I find spare parts for my Smeg LIFTB900?
Spare parts such as filters, remote control, and LED modules are available from Smeg authorized dealers or online parts stores. Use the model number LIFTB900 for accurate ordering.
User questions about LIFTB900 SMEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual LIFTB900 - SMEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LIFTB900 by SMEG.