DCS-F4808E - Security Camera D-LINK - Free user manual and instructions
Find the device manual for free DCS-F4808E D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | DCS-F4808E |
| Resolution | 4 Megapixels (2560x1440) |
| Lens | 2.8mm fixed lens, F1.6 |
| Field of View | Horizontal: 100°, Vertical: 55°, Diagonal: 115° |
| Night Vision | Up to 30m (98ft) with IR LEDs |
| Compression | H.265, H.264, MJPEG |
| Power Supply | PoE (IEEE 802.3af) or 12V DC |
| Power Consumption | Max 7W |
| Weather Rating | IP67 (dust and water resistant) |
| Vandal Resistance | IK10 (impact resistant) |
| Operating Temperature | -30°C to 60°C (-22°F to 140°F) |
| Dimensions | 200mm x 70mm x 70mm |
| Weight | Approximately 500g (17.6oz) |
| Video Output | Ethernet (RJ45) with PoE |
| Audio | Built-in microphone and speaker (two-way audio) |
| Storage | MicroSD card slot (up to 256GB), NVR, or cloud |
| Security | Password protection, HTTPS encryption, 802.1x authentication |
| Mounting | Wall or ceiling mount (bracket included) |
| Maintenance | Clean lens with soft cloth; check cables; firmware updates via app |
| Repairability | Limited user-serviceable parts; contact D-Link support |
| Compliance | CE, FCC, RoHS |
Frequently Asked Questions - DCS-F4808E D-LINK
How to install the D-Link DCS-F4808E camera?
Mount the camera to a wall or ceiling using the included bracket. Connect the Ethernet cable for PoE power and data, or use the 12V DC power adapter. Download the D-Link app (e.g., mydlink) and follow the setup wizard to add the camera.
Does the DCS-F4808E support night vision?
Yes, it has built-in IR LEDs that provide night vision up to 30 meters (98 feet) in complete darkness. The camera automatically switches to black and white mode when light is low.
Can I power the camera using PoE?
Absolutely. The DCS-F4808E supports Power over Ethernet (PoE) IEEE 802.3af. This allows both power and data over a single Ethernet cable, simplifying installation. A 12V DC input is also available as an alternative.
Which mobile app is compatible with the DCS-F4808E?
The camera works with the mydlink app (available for iOS and Android). You can also use third-party software that supports ONVIF standard.
How to reset the camera to factory defaults?
Press and hold the reset button on the camera for about 10 seconds until the LED blinks rapidly. This will restore default settings, including IP address and password.
What is the maximum video resolution of the DCS-F4808E?
The camera captures video at a maximum resolution of 4 Megapixels (2560x1440) at 30 frames per second. It also supports lower resolutions such as 1080p and 720p.
Can I view the camera feed remotely?
Yes, you can view live video from anywhere using the mydlink app or web portal. The camera supports port forwarding and cloud connectivity for easy remote access.
Is the DCS-F4808E weatherproof?
Yes, it has an IP67 rating, meaning it is fully protected against dust and can be submerged in water up to 1 meter for 30 minutes. It also has an IK10 vandal-resistant housing.
Does the camera support two-way audio?
Yes, the DCS-F4808E has a built-in microphone and speaker for two-way audio communication. You can listen and talk through the mydlink app.
What motion detection features does the DCS-F4808E offer?
The camera supports smart motion detection with customizable zones and sensitivity. It can send push notifications and trigger recording when motion is detected. It also supports intrusion detection and line crossing detection.
User questions about DCS-F4808E D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DCS-F4808E - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCS-F4808E by D-LINK.