DXK24ZMA-S - Air Conditioning MITSUBISHI - Free user manual and instructions
Find the device manual for free DXK24ZMA-S MITSUBISHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Split Air Conditioner |
| Model | DXK24ZMA-S |
| Brand | Mitsubishi |
| Cooling Capacity | 24000 BTU/h (7.0 kW) |
| Heating Capacity (if applicable) | 27000 BTU/h (7.9 kW) |
| Energy Efficiency Ratio (EER) | 11.5 |
| Seasonal Energy Efficiency Ratio (SEER) | 14.0 |
| Power Supply | 220-240 V, 50 Hz, 1 Phase |
| Refrigerant | R32 |
| Indoor Unit Dimensions (W x H x D) | 1050 x 320 x 260 mm |
| Outdoor Unit Dimensions (W x H x D) | 870 x 700 x 330 mm |
| Indoor Unit Weight | 16 kg |
| Outdoor Unit Weight | 52 kg |
| Air Flow (Hi/Lo) | 600 / 450 m³/h |
| Noise Level Indoor (Hi/Lo) | 45 / 28 dB(A) |
| Noise Level Outdoor | 54 dB(A) |
| Operating Temperature Range (Cooling) | -10°C to 46°C |
| Operating Temperature Range (Heating) | -15°C to 24°C |
| Filter | Washable, Anti-bacterial |
| Warranty | 5 Years on Compressor, 2 Years on Parts |
Frequently Asked Questions - DXK24ZMA-S MITSUBISHI
How often should I clean the air filter?
We recommend cleaning the filter every 2 weeks under normal use. Use a vacuum or wash with lukewarm water and mild detergent. Ensure it is fully dry before reinserting.
What does the error code E1 mean?
Error code E1 indicates a communication fault between the indoor and outdoor units. Check the cable connections and ensure power is stable. If the problem persists, contact a qualified technician.
Can I use an extension cord with the air conditioner?
No, never use an extension cord. The unit requires a dedicated power outlet. If the cord is too short, have a qualified electrician install a closer outlet.
How do I reset the air conditioner?
To reset, turn off the unit and unplug it for 10 minutes. Alternatively, press the reset button on the remote (if available) or use the main power switch.
What is the recommended temperature setting for energy saving?
Set the thermostat to 24-26°C (75-78°F) for cooling and 20-22°C (68-72°F) for heating. Each degree adjustment can save up to 10% on energy consumption.
Why is the unit not cooling properly?
Possible causes include a dirty filter, blocked outdoor unit, low refrigerant, or incorrect thermostat settings. Clean the filter and check for obstructions first. If the issue continues, call a service technician.
How do I use the timer function?
Press the Timer button on the remote. Use + or - to set the desired ON or OFF time. Confirm with the SET button. The timer can be programmed for up to 24 hours.
What is the difference between Cool and Dry mode?
Cool mode reduces temperature while Dry mode removes excess humidity without significant cooling. Use Dry mode when the room feels damp but temperature is already comfortable.
How much clearance does the outdoor unit need?
Ensure at least 50 cm of space on all sides of the outdoor unit for proper airflow. Do not cover or enclose the unit, as it may cause overheating and reduced efficiency.
Can I install the air conditioner myself?
Installation requires specialized knowledge of electrical and refrigerant systems. It must be performed by a certified installer to ensure safety and warranty validity. DIY installation is not recommended.
User questions about DXK24ZMA-S MITSUBISHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual DXK24ZMA-S - MITSUBISHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DXK24ZMA-S by MITSUBISHI.