Pure Clean PUCRC25PLUS.8 - Vacuum Cleaner SereneLife - Free user manual and instructions

Product Type	Mini Robotic Vacuum Cleaner
Brand	SereneLife
Model	Pure Clean PUCRC25PLUS.8
Dimensions (Approx.)	Diameter 10 inches, Height 3 inches
Weight (Approx.)	2.5 lbs
Battery Type	Rechargeable Li-ion
Battery Voltage	11.1V DC
Working Current	700-800 mA
Charging Time	3-4 hours (8 hours for first use)
Runtime	Approx. 60-90 minutes
Dust Bin Capacity	Approx. 300 ml
Filter Type	Washable inner filter
Cleaning Modes	Random, Spiral, Along the wall
Suitable Floor Types	Wood, tile, linoleum (not for long-pile carpets)
Sensors	Anti-drop sensor, bumper
Side Brushes	2 (L and R, replaceable)
Accessories Included	Main body, rechargeable battery, adapter, filter, user manual, side brushes (2)
Safety Features	Use only original battery and adapter
Maintenance	Clean dust bin, filter, and intake periodically
Customer Support	Phone [phone], Email [e-mail]

Frequently Asked Questions - Pure Clean PUCRC25PLUS.8 SereneLife

Why is the red LED light on after powering on?

The battery may be low or the vacuum may be elevated from the floor. Recharge the battery or place it on a flat surface.

The vacuum is on but won't collect dust. What should I do?

Check if the dustbin is full or the filter is incorrectly installed. Empty the dustbin and reinstall the filter properly.

Why is the vacuum moving backwards?

This may happen on dark colored flooring or if the anti-drop sensor light is covered. Try using it on light colored flooring and clean the sensor.

The blue LED is still flashing after 4 hours of charging. What does it mean?

The power supply may have been interrupted or the battery needs resetting. Ensure full connection and charge for 4 hours, or unplug battery and hold power button for 10 seconds.

How do I clean the dust bin?

Open the top cover, remove the dust bin, open its lid, take out the inner filter, empty dirt, rinse with tap water, dry completely, then reinstall filter and dust bin.

Can I use this vacuum on carpets?

It is suitable for wood, tile, and linoleum but not for long-pile carpets.

How often should I clean the filter?

Periodically clean the filter with a soft bristled brush to maintain performance. Ensure it is dry before reinstalling.

What should I do if the side brushes are crooked?

Pour hot water over the brushes to revert their shape, or replace them if worn.

How do I install the side brushes?

Install the L side brush in the L slot and R side brush in the R slot on the bottom. Press until they click into place.

What is the first-time charging requirement?

Charge the vacuum for at least 8 hours before first use to ensure optimal battery performance.

USER MANUAL Pure Clean PUCRC25PLUS.8 SereneLife

Exterior view of a white vacuum cleaner with 'Pure Clean*' branding and 'OPEN' button, no additional text or symbols visible.

Mini Robotic Vacuum Cleaner

User Manual

TABLE OF CONTENTS

SAFETY INSTRUCTIONS 3

* BATTERY AND RECHARGING INSTRUCTIONS 4

PRODUCT FEATURES 4

MAIN BODY AND ACCESSORIES 5

BATTERY INSTALLATION AND REMOVAL 6

RECHARGING BATTERY 7

GENERAL OPERATION 8

CLEANING AND MAINTENANCE 9

*CLEANING DUST BIN 9

*CLEANING INTAKE 12

TROUBLESHOOTING 13

SAFETY INSTRUCTIONS

Read the safety instructions before operating the Mini Robotic Vacuum Cleaner and keep this manual handy for your future reference. Observe the basic safety rules to prevent any occurrence of fire, electric shock or personal injury.

1. Do not operate the Mini Robotic Vacuum Cleaner outdoors.
2. Before starting to use the Mini Robotic Vacuum Cleaner, make sure the dust bin filter is properly installed.
3. Do not use this product in wet or moist environments (any environment with liquid), e.g. bathroom or laundry room.
4. Before you use the Mini Robotic Vacuum Cleaner, remove any loose articles on the floor such as clothes, paper, loose cables, or extension cords. Additionally, lift curtains and drapes off the floor to avoid any possible accidents. If a loose cable is tangled with the Mini Robotic Vacuum Cleaner, the cable may be dragged with the Mini Robotic Vacuum Cleaner and could topple furniture or cause property damage.
5. Never stand or sit on the Mini Robotic Vacuum Cleaner. Use Caution when operating the Mini Robotic Vacuum Cleaner around children or pets.
6. DO NOT let the Mini Robotic Vacuum Cleaner approach cigarettes, lighters, matches or other flammable objects or combustible materials.
7. Never use the product to clean up combustible or highly volatile liquids such as gasoline.
8. While the product is in operation, make sure all doors leading outside are closed.
9. If the Mini Robotic Vacuum Cleaner malfunctions or is damaged by force, do not operate regardless the cause. Call your local dealer for service information.
10. Before charging, ensure that the adapter and outlet are properly connected.
11. The Mini Robotic Vacuum Cleaner operates in temperatures from 32^ F to 104^ F. Do not use this product in high-temperature environments or under intense sunlight.
12. The appliance is not intended for children, people with reduced physical sensory or mental capabilities, or those with a lack of experience and knowledge. Proper supervision or instruction should be given to all users for safety reasons.
13. Do not let children play with the appliance.

NOTE:

Take out or remove the packing foam from behind the front bumper before using the Mini Robotic Vacuum Cleaner.

Close-up of a white circular device with blue directional arrows indicating rotation or movement (no text or symbols visible)

BATTERY AND RECHARGING INSTRUCTIONS

1. The battery is rechargeable. Please use the voltage and current specified on the packing. If you are not sure of the voltage and current of your house, please contact the seller or local power company of a licensed electrician. (Only use the battery pack provided by the manufacturer or specified by the manufacturer, please check the polarity before installing the battery.

Battery voltage: 11.1V DC

Working current: 700-800mA

1. Only use the original battery and power adapter of the product for charging.

2. Charging adapter is for indoor use only.

3. Do not recharge the product if the battery cord or plug is damaged.

4. Never touch the charger, plug or cable with wet or damp hands.

5. Before cleaning the product, unplug the adapter, switch off the unit and take out the battery.

6. Remove the battery when it is not in use for a long time.

7. Remove the battery from the product if disposing of the appliance

8. Switch off the Mini Robotic Vacuum Cleaner before removing the battery. Recycle and dispose of the battery properly.

PRODUCT FEATURES

This revolutionary Mini Robotic Vacuum Cleaner is equipped with functions suitable for cleaning floor surfaces such as wood, tile, and linoleum. The Mini Robotic Vacuum Cleaner will automatically switch between modes during its run cycle to ensure that every surface of the floor is cleaned.

graph LR
    A["Random"] --> B["Spiral"]
    B --> C["Along the wall"]

MAIN BODY AND ACCESSORIES

Technical line drawing of a coiled mechanical component (no text or symbols)

Simple line drawing of a cylindrical object with internal triangular cavities (no text or symbols)

Simple line drawing of a box with a cable extending from its top (no text or symbols)

Main Body x 1 Rechargeable Battery x 1 Adapter x 1

Technical line drawing of a curved mechanical component or housing (no text or symbols)

Simple line drawing of an open book with a lowercase 'i' symbol on the right page (no text or additional symbols)

Four identical line drawings of a mechanical component or tool, shown in different angles (no text or symbols)

Filter x 1 User Manual x 1 Side brush x 2

MAIN BODY AND ACCESSORIES

BATTERY INSTALLATION AND REMOVAL

1. Before installing or removing the battery, disconnect the product from the power source.
2. Open the battery cover.
3. Insert the battery into the battery cabinet and close the cover. Make sure the cover clicks securely into its position.

RECHARGING BATTERY

1. Before charging, make sure the battery is correctly installed.
2. To charge the product, connect the adapter output into the DC jack, then plug the output into a wall outlet. A blue light will flash when charging.
3. After it is fully charged, the indicator light will turn to a solid blue light.
4. When the product runs out of power, an LED indicator will turn red/purple to signal that charging is needed.
5. To ensure the best performance and life span of the battery, please charge the product for at least 3 hours continuously.

NOTE:

Adapter Plug

a. Charge the Mini Robotic Vacuum Cleaner for at least 8 hours before first use.

b. When the battery is low, please charge as soon as possible.

c. If you are not using the robot for an extended period of time, please fully charge the battery and remove it, then store it in a well ventilated and dry place.

d. If the robot is unused for more than 3 months, please charge it for at least 8 hours before using again.

GENERAL OPERATION

Starting Operation

1. Place the product in a room with a lot of free space, then power it on.
2. When the product runs out of power, the LED indicator in the illumination ring will turn red and the product will stop working.

Technical line drawing of a circular mechanical component with internal parts and a separate bracket (no text or symbols)

Note: *This product is not suitable for long-pile carpets.

Install the L side brush in the L slot and the R side brush in the R slot on the bottom of the vacuum. Be sure that each side brush clicks into place. To remove side brushes, pull firmly up.

CLEANING AND MAINTENANCE

Cleaning Dust Bin

1. Open the upper cover by lifting the lid near the power on/off button

Line drawing of a hand holding a circular mechanical component with a tool, no text or symbols present

1. Put your finger into the dust bin groove and grip to take it out

Line drawing of a robotic vacuum cleaner with a hand adjusting the component (no text or symbols)

1. Open the lid of dust bin.
2. Take out the inner filter.
3. Empty the dirt in the dust bin.

Line drawing of a mechanical device with internal compartments and a lid, showing no text or symbols

Technical line drawing of a mechanical component with internal structural framework (no text or symbols)

Hand pouring liquid into a container with an arrow indicating process (no text or symbols)

1. Rinse the dust bin with tap water. Do not wash it in washing machine, dish washer or other machine.
2. Periodically clean the filter with a soft bristled brush.
3. Reinstall the filter and the dust bin lid when fully dry.
4. Put the dust bin back into the vacuum.

NOTE:

Before putting back the dust bin, make sure the PE pad (function as non-return valve) in the dust bin is well located. Recheck the filter also before operating the product. Operating the product without filter might cause malfunction.

graph TD
    A["6: Washing Machine"] --> B["7: Hand Stipa"]
    B --> C["8: Cover Box with Plastic Box"]
    C --> D["9: Circular Washer"]

Cleaning Intake

With use over time, dirt and dust may accumulate around the intake of the product. For best cleaning results and efficiency, the intake should be cleaned periodically.

1. Remove the external power source.
2. Clean the dirt and dust at the intake

Technical line drawing of a mechanical device with three blades and a central circular component (no text or symbols)

TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE SOLUTION
Red LED light stays on after product is powered on	1. The battery is low2. The main body is elevated from the floor	1. Recharge the battery2. Ensure that the vacuum is on a flat surface of the floor
Vacuum is on but won't collect dust	1. Dustbin is full2. The filter is not correctly installed	1. Empty the dustbin2. Reinstall the filter
The product is moving backwards	1. The product is on dark colored flooring2. The anti-drop sensor light is covered	1. Put the robot on light colored flooring2. Clean the anti-drop sensor light
The blue LED light is still flashing after 4 hours of charging	1. The power supply may have been cut off during charging2. The battery needs to be reset	1. Be sure that the power supply is fully connected, then recharge for 4 hours2. Unplug the battery from the device and hold the power button for 10 seconds, then reconnect the battery.
The side brushes are crooked and not sweeping well	The side brush is worn from use over time	1. Pour hot water over brushes to revert to their original shape2. Replace side brushes
The vacuum moves in circles only and won't go straight	One of the wheel wires may be loose	1. Open the wheel cover and connect the loose wire properly2. Send the robot to seller for repair

Pure Clean\*

Questions? Issues?

We are here to help!

Phone: [phone]

Email: [e-mail]