MiVue WORKMATE XDC - Dash cam NAVMAN - Free user manual and instructions
Find the device manual for free MiVue WORKMATE XDC NAVMAN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dash Cam |
| Brand | Navman |
| Model | MiVue WORKMATE XDC |
| Dimensions | Approx. 80 x 55 x 30 mm |
| Weight | Approx. 90 g |
| Power Source | 12-24V DC via cigarette lighter adapter |
| Recording Resolution | 1440p (2560 x 1440) @ 30 fps |
| Frame Rate | 30 fps |
| Field of View | 160° wide angle |
| Storage | MicroSD up to 128 GB (Class 10 or U3) |
| GPS | Built-in GPS for speed and location tracking |
| G-Sensor | 3-axis G-sensor for impact detection |
| Parking Mode | Motion detection and time-lapse recording |
| Loop Recording | Continuous loop recording with auto overwrite |
| Night Vision | Low-light enhancement with WDR technology |
| Battery | Built-in supercapacitor |
| Operating Temperature | -10°C to 60°C |
| Mounting | Suction cup or adhesive mount included |
| Display | 2.4-inch LCD |
| Audio Recording | Built-in microphone (can be disabled) |
| Warranty | 1 year limited |
Frequently Asked Questions - MiVue WORKMATE XDC NAVMAN
How do I install the MiVue WORKMATE XDC dash cam?
Clean the windshield, attach the mount, route the power cable, and plug into the cigarette lighter. Ensure the lens is clear and adjust angle.
How do I format the microSD card for the dash cam?
Go to Settings > Format SD card in the menu. Use a Class 10 or U3 card up to 128 GB.
How do I enable parking mode?
Parking mode activates automatically when the vehicle is off. Ensure the dash cam is hardwired or connected to a constant power source.
How can I view recorded footage?
Remove the SD card and insert into a computer, or connect the dash cam via USB. Use the Navman app or software.
How do I update the firmware?
Download the latest firmware from the Navman website, copy to the SD card root, insert into the dash cam, and follow on-screen instructions.
What should I do if the dash cam stops recording?
Check the SD card for errors, format it, or replace with a new card. Ensure the card is Class 10 or U3. Also, check power connections.
How do I reset the dash cam?
Press and hold the reset button with a pin for 10 seconds, or navigate to Settings > Reset to factory defaults.
How do I clean the lens?
Use a soft, dry microfiber cloth. Avoid liquids or abrasive materials. Wipe gently in circular motions.
How do I remove the dash cam from the mount?
Press the release button or slide the dash cam upward/outward depending on the mount type. Do not force it.
How do I connect the dash cam to the Navman app?
Download the Navman app, enable Wi-Fi on the dash cam, connect your phone to the dash cam's Wi-Fi network, and pair via the app.
User questions about MiVue WORKMATE XDC NAVMAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dash cam in PDF format for free! Find your manual MiVue WORKMATE XDC - NAVMAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MiVue WORKMATE XDC by NAVMAN.