Buffalo BX320C - Heating Brivis - Free user manual and instructions
Find the device manual for free Buffalo BX320C Brivis in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Gas Heater |
| Model | Buffalo BX320C |
| Brand | Brivis |
| Energy Source | Natural Gas or LPG |
| Heat Output | 20 kW (approx.) |
| Dimensions (H x W x D) | 600 x 400 x 200 mm |
| Weight | 15 kg |
| Installation Type | Wall-mounted or Ducted |
| Ignition | Electronic |
| Thermostat | Built-in or Remote |
| Safety Features | Flame failure device, overheat protection |
| Efficiency | 5-star energy rating (approx.) |
| Controls | Manual or remote control |
| Airflow | Fan forced |
| Venting | Flue required (room-sealed) |
| Warranty | 5 years (typical) |
| Maintenance | Annual service recommended |
| Filter | Washable air filter |
| Gas Inlet | 3/4 inch BSP |
| Power Supply | 230V AC, 50Hz |
Frequently Asked Questions - Buffalo BX320C Brivis
What gas types can the Brivis Buffalo BX320C use?
The heater is designed for natural gas but can be converted to LPG with a conversion kit. Check the manual for specific gas pressure requirements.
How do I clean the air filter?
Remove the front panel, take out the filter, and wash it with warm soapy water. Let it dry completely before reinserting. Clean every 2-4 weeks during use.
What are the safety features?
Includes a flame failure device that cuts gas if the flame goes out, and overheat protection that shuts off the heater if internal temperatures exceed safe limits.
Is professional installation required?
Yes, installation must be performed by a licensed gas fitter to ensure correct flueing, gas connection, and compliance with local regulations.
Can I use a thermostat with this heater?
The Buffalo BX320C is compatible with a remote thermostat or its built-in thermostat for temperature control. Some models include a wireless remote.
How often should the heater be serviced?
An annual service by a qualified technician is recommended to check gas pressure, clean burners, and ensure safe operation.
What is the heat output coverage?
With 20 kW output, it can heat areas up to approximately 200 square meters, depending on insulation and ceiling height.
Does the heater need a flue?
Yes, it is a room-sealed appliance requiring a flue for exhaust gases. Ensure the flue is unobstructed and installed per manual.
What should I do if the heater doesn't ignite?
Check gas supply, ensure the pilot light is lit (if applicable), and inspect the ignition electrodes. If problem persists, contact a technician.
Are replacement parts available?
Yes, Brivis offers spare parts through authorized dealers, including thermocouples, gas valves, and fan motors. The heater is designed for repairability.
User questions about Buffalo BX320C Brivis
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual Buffalo BX320C - Brivis and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Buffalo BX320C by Brivis.