SuperServer SYS-221H-TN24R - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer SYS-221H-TN24R Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Supermicro |
| Model | SuperServer SYS-221H-TN24R |
| Form Factor | 2U Rackmount |
| Dimensions (W x H x D) | 17.2 x 3.5 x 29.2 in (437 x 89 x 742 mm) |
| Weight | 35 lbs (15.9 kg) |
| Power Supply | Dual redundant 1600W Platinum |
| Processor Support | Dual Intel Xeon Scalable (3rd Gen) |
| Memory Support | Up to 4TB DDR4 ECC (24 DIMM slots) |
| Drive Bays | 24 x 2.5" SAS/SATA hot-swap |
| Expansion Slots | 4 x PCIe 4.0 x16, 2 x PCIe 4.0 x8 |
| Network | 2 x 10GbE, 2 x 1GbE |
| Management | IPMI 2.0 with dedicated LAN |
| Maintenance | Tool-less access to drives, fans, and PSUs |
| Safety Certifications | UL, CE, FCC |
| Spare Parts & Repairability | FRU components; replaceable PSU, fans, drives |
Frequently Asked Questions - SuperServer SYS-221H-TN24R Supermicro
How do I install hard drives in this server?
The SYS-221H-TN24R supports 24 hot-swap 2.5" SAS/SATA drives. Simply unlatch the drive carrier, insert the drive, and close the handle. The server supports hot-swap, so no power down is needed.
What is the default IPMI IP address?
The default IPMI IP is 192.168.1.2 with username 'admin' and password 'admin'. It is recommended to change this on first boot for security.
How can I reset the BMC (IPMI)?
You can reset the BMC via the IPMI web interface (Maintenance > Reset) or by holding the dedicated BMC reset button on the motherboard (if available).
What processors are compatible?
This server supports dual Intel Xeon Scalable processors (3rd Gen), specifically LGA-4189 socket. Ensure your BIOS is updated for best compatibility.
How to configure RAID on this server?
RAID configuration can be done using the built-in Broadcom 3916 SAS controller (or optional add-in card). Enter the RAID BIOS during POST (Ctrl+R) or use the software utility in the operating system.
How do I update the firmware?
Download the latest firmware from Supermicro's support site. Use the SUM (Supermicro Update Manager) tool or the IPMI web interface to upload and apply updates.
What is the maximum memory capacity?
The system supports up to 4TB of memory using 128GB DDR4 ECC RDIMM/LRDIMM modules across 24 DIMM slots (12 per CPU).
How to connect to the server remotely?
Connect via the IPMI dedicated port (default IP: 192.168.1.2). Use a web browser or IPMIView software. For KVM over IP, enable the Java/HTML5 console.
How to replace a power supply unit?
The PSUs are hot-swappable. Release the retention clip, pull the old PSU out, and slide in a new one until it clicks. No tools required.
How to clean the server?
Power down and unplug. Use compressed air to blow dust from fans and heatsinks. Avoid liquid cleaners. Clean air filters (if present) with mild soap and water, then dry thoroughly.
User questions about SuperServer SYS-221H-TN24R Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer SYS-221H-TN24R - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer SYS-221H-TN24R by Supermicro.