SuperServer SYS-621H-TN12R - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer SYS-621H-TN12R Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Server |
| Form Factor | 2U |
| Processor | Dual Intel Xeon Scalable (3rd Gen) |
| Memory | Up to 2TB DDR4 ECC, 16 Slots |
| Storage Bays | 12x 3.5" Hot-Swap SATA/SAS |
| Network | Dual 10GbE RJ45 |
| Power Supply | 2x 1000W Redundant (Platinum) |
| Management | IPMI 2.0 with Dedicated LAN |
| Expansion Slots | 3x PCIe 4.0 x16, 2x PCIe 4.0 x8 |
| Dimensions (W x H x D) | 17.2 x 3.5 x 25.6 inches |
| Weight | 45 lbs (20.4 kg) |
| Operating Temperature | 10°C-35°C (50°F-95°F) |
| Cooling | 4x 80mm Hot-Swap Fans |
| GPU Support | Up to 2x Double-Wide GPUs |
| RAID Support | Hardware RAID (Optional) or SATA3 via Chipset |
| Operating System | Windows Server, Linux (Certified) |
| Security | TPM 2.0, Secure Boot, Chassis Intrusion Detection |
| Maintenance | Tool-less Access, Hot-Swap Drives and Fans |
| Spare Parts | Power Supplies, Fan Modules, Drive Trays, Rails |
Frequently Asked Questions - SuperServer SYS-621H-TN12R Supermicro
How do I access the BIOS setup?
Press DEL during boot to enter the BIOS. For IPMI, press F2 or use the web interface.
What is the default IPMI login?
Default username is ADMIN and password is ADMIN (case-sensitive). Change immediately after first login.
How to configure RAID?
Enter the RAID BIOS by pressing Ctrl+I for Intel or Ctrl+H for Broadcom. Create array and initialize drives.
Can I install non-Supermicro memory?
Only use ECC DDR4 RDIMMs/LRDIMMs listed in the memory compatibility matrix. Non-certified may cause instability.
How to update firmware?
Download the latest firmware from Supermicro support. Use IPMI Firmware Update section or bootable USB with DOS/EFI.
What is the maximum RAM capacity?
Up to 2TB using 128GB LRDIMMs across 16 slots. Mixing DIMM types is not supported.
How to reset the IPMI password?
Power off, remove CMOS battery for 30 seconds, or short the IPMI reset jumper. Default password restored.
Does the server support hot-swap power supplies?
Yes, the redundant 1000W Platinum PSUs are hot-swappable. Ensure the remaining unit can handle the load.
What is the proper shutdown procedure?
Shut down the OS normally, then press the power button for 4 seconds to force off. For IPMI, select 'Power Off'.
Where can I find driver downloads?
Visit www.supermicro.com, select your model under 'Support' > 'Download', and choose your OS for drivers.
User questions about SuperServer SYS-621H-TN12R Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer SYS-621H-TN12R - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer SYS-621H-TN12R by Supermicro.