MT23 - Fridge Beverage-Air - Free user manual and instructions
Find the device manual for free MT23 Beverage-Air in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Undercounter Refrigerator |
| Model | MT23 |
| Brand | Beverage-Air |
| Exterior Finish | Stainless Steel |
| Interior Finish | Stainless Steel |
| Capacity (cu. ft.) | 23 |
| Number of Doors | 1 |
| Door Type | Solid, Field-Reversible |
| Shelving | 4 Adjustable Wire Shelves |
| Temperature Range | 33°F to 38°F (1°C to 3°C) |
| Refrigerant | R290 (Environmentally Friendly) |
| Compressor | 1/4 HP |
| Electrical Requirements | 115V / 60Hz / 2.5 Amps |
| Plug Type | NEMA 5-15P |
| Dimensions (W x D x H) | 27" x 30" x 32" |
| Weight | 150 lbs |
| Casters | Locking Casters Included |
| Defrost | Automatic |
| Digital Temperature Display | Yes, External |
| Interior Light | LED |
| Warranty | 3 Years Parts and Labor |
| Certifications | NSF, UL, ETL |
| Energy Star Qualified | Yes |
| Clean with | Mild detergent and warm water |
| Spare Parts Available | Yes, through authorized distributors |
Frequently Asked Questions - MT23 Beverage-Air
How to set the temperature on my Beverage-Air MT23 refrigerator?
Locate the digital temperature controller on the front panel. Press the SET button, then use the arrow keys to adjust the desired temperature between 33°F and 38°F. Press SET again to confirm.
Why is my Beverage-Air MT23 not cooling properly?
Check if the condenser coils are clean and free of dust. Ensure the door gaskets seal tightly. Verify that the evaporator fan is running and the airflow is not blocked. Also, confirm the ambient temperature is within 75°F to 100°F.
How often should I clean the condenser coils?
Clean the condenser coils at least every 3 months to maintain efficient cooling. Use a soft brush or vacuum to remove dust and debris.
What type of refrigerant does the MT23 use?
The Beverage-Air MT23 uses R290 (propane) refrigerant, which is environmentally friendly and has low global warming potential.
How to replace the door gasket on my MT23?
First, remove the old gasket by pulling it out of the groove. Clean the groove with mild detergent. Then, press the new gasket into place, starting from the top and working downward. Ensure it fits snugly all around.
Can I install the MT23 under a counter?
Yes, the MT23 is designed for undercounter installation. Ensure there is adequate ventilation around the sides and back (minimum 1 inch clearance). The front grille must not be blocked.
What does the alarm on my Beverage-Air MT23 mean?
An alarm indicates a temperature deviation or door open condition. Check the digital display for error codes. Common codes: 'HI' (high temperature), 'LO' (low temperature), 'dO' (door open). Refer to the manual for detailed troubleshooting.
How to adjust the leveling legs on the MT23?
The MT23 has locking casters for mobility. To level, turn the leveling legs clockwise to raise or counterclockwise to lower. Use a level to ensure the unit is stable and doors close properly.
What are the electrical requirements for the MT23?
The unit requires a 115V, 60Hz electrical supply with a standard 15-amp circuit. Use a dedicated outlet and avoid extension cords. The plug is a NEMA 5-15P.
How to troubleshoot a noisy Beverage-Air MT23?
First, check if the unit is level on the floor. Ensure loose items are removed from inside. Listen for fan blade obstruction or compressor vibration. If noise persists, contact technical support.
User questions about MT23 Beverage-Air
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual MT23 - Beverage-Air and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MT23 by Beverage-Air.