dsPIC33CH512MP508 - Microcontroller Microchip - Free user manual and instructions
Find the device manual for free dsPIC33CH512MP508 Microchip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Signal Controller (DSC) |
| Brand | Microchip Technology |
| Model | dsPIC33CH512MP508 |
| Core Architecture | Dual 16-bit dsPIC33E cores |
| Flash Memory | 512 KB |
| RAM | 48 KB |
| Package Type | 64-pin TQFP (10x10 mm) |
| Operating Voltage | 3.0V to 3.6V |
| Operating Temperature | -40°C to +125°C |
| Max CPU Speed | 200 MHz (each core) |
| Key Peripherals | High-speed PWM, 12-bit ADC, CAN, UART, SPI, I2C |
| DMA Channels | Up to 8 |
| Timers | Up to 9 (16/32-bit) |
| Digital I/O Pins | Up to 53 |
| Hardware Safety | ESD HBM 2 kV, CDM 500 V |
| Dimensions (package) | 10 mm x 10 mm x 1.0 mm |
| Weight (typical) | 0.5 g |
| Maintenance | Keep in anti-static bag; avoid moisture |
| Spare Parts Availability | Contact Microchip distributors |
| General Information | Dual-core DSC for advanced motor control and power conversion |
Frequently Asked Questions - dsPIC33CH512MP508 Microchip
How do I program the dsPIC33CH512MP508?
You can program the dsPIC33CH512MP508 using Microchip's MPLAB X IDE and a compatible programmer/debugger like the MPLAB Snap or ICD 4. The device supports In-Circuit Serial Programming (ICSP) via its PGECx and PGEDx pins.
What is the maximum operating frequency?
Each core can run up to 200 MHz when operating at 3.3V. The device has an internal PLL that can multiply the external oscillator frequency.
How many ADC channels are available?
The dsPIC33CH512MP508 features up to 6 12-bit SAR ADC modules, each with multiple input channels. The exact number depends on the package and pin configuration, but the device supports up to 24 analog inputs.
Can I use both cores independently?
Yes, the dsPIC33CH512MP508 has two dsPIC33E cores that can run independently. They communicate through shared memory and inter-core interrupts. This allows parallel processing of control and communication tasks.
What is the power consumption?
Typical active power consumption is around 50 mA per core at full speed (200 MHz). In sleep mode, consumption can drop to a few microamps. Exact values depend on peripherals enabled.
What development tools are recommended?
Microchip's MPLAB X IDE (v5.50 or later) and XC16 compiler are the primary tools. For debugging, use MPLAB Snap, ICD 4, or Real ICE. Schematic libraries are available on Microchip's website.
Does it support CAN communication?
Yes, it has up to 2 CAN 2.0B compliant modules. They support both standard and extended frames. The modules can be configured for CAN-FD in some variants (check device datasheet).
What is the package size?
The device is available in a 64-pin TQFP package with dimensions 10 mm x 10 mm and a 0.5 mm pitch. Other packages may exist for the same silicon.
How do I handle ESD protection?
The device has built-in ESD protection (HBM 2 kV, CDM 500 V). However, during handling and assembly, use anti-static mats and wrist straps. Follow standard ESD safe practices.
Where can I find the full datasheet?
The complete datasheet and user manual are available on Microchip's website under the product page for dsPIC33CH512MP508. The manual is 830 pages and covers all electrical characteristics and register details.
User questions about dsPIC33CH512MP508 Microchip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Microcontroller in PDF format for free! Find your manual dsPIC33CH512MP508 - Microchip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. dsPIC33CH512MP508 by Microchip.