SPE48HC-18M-STL - Fridge Beverage-Air - Free user manual and instructions
Find the device manual for free SPE48HC-18M-STL Beverage-Air in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Refrigerator |
| Brand | Beverage-Air |
| Model | SPE48HC-18M-STL |
| Width | 48 inches |
| Depth | 32 inches |
| Height | 66 inches |
| Weight | 350 lbs |
| Electrical Supply | 115V, 60Hz, 3A |
| Temperature Range | 32°F to 40°F |
| Capacity | 18 cubic feet |
| Exterior Finish | Stainless Steel |
| Door Type | Solid, Self-closing |
| Shelving | Adjustable wire shelves |
| Interior Light | LED |
| Thermostat | Digital, external display |
| Refrigerant | R290 (Environmentally friendly) |
| Maintenance | Clean condenser coils monthly; replace door gaskets as needed |
| Safety Features | Tip-over restraint brackets; locking casters |
| Spare Parts Availability | Direct from manufacturer or authorized dealers |
| Warranty | 1 year parts and labor |
| Intended Use | Commercial, indoor |
Frequently Asked Questions - SPE48HC-18M-STL Beverage-Air
How do I set the temperature on my SPE48HC-18M-STL?
Press and hold the SET button on the digital thermostat for 3 seconds. Use the arrow keys to adjust to the desired temperature between 32°F and 40°F. Press SET again to confirm.
Why is my refrigerator not cooling properly?
Check that the condenser coils are clean and free of dust. Ensure the door is fully closed and the gasket is intact. Also verify that the temperature setpoint is correct and that the unit is not overloaded.
How often should I clean the condenser coils?
Clean the condenser coils monthly to maintain efficient operation. Use a soft brush or vacuum to remove dust and debris. Turn off the unit before cleaning.
What should I do if the door does not close properly?
Check that the door gasket is clean and not damaged. Adjust the leveling legs to ensure the unit is perfectly level. If the gasket is worn, replace it with an authentic Beverage-Air part.
Can I store warm food in the refrigerator?
No, always cool food to room temperature before placing it inside. Adding warm food can temporarily raise the internal temperature and affect other stored items.
How do I replace the interior LED light?
The LED light is integrated and should last the life of the unit. If it fails, contact Beverage-Air service for a replacement. Do not attempt to open the light assembly.
What is the recommended clearance around the unit?
Leave at least 4 inches of clearance on all sides for proper air circulation. The unit should not be installed near heat sources or in direct sunlight.
How do I change the door swing direction?
This model has a non-reversible door. The door handle is factory-installed on the right side. If you require a left-swing door, contact Beverage-Air for a custom order.
What type of refrigerant does this unit use?
The SPE48HC-18M-STL uses R290 (propane) refrigerant, which is environmentally friendly. This refrigerant is flammable; all service must be performed by qualified technicians.
Where can I find replacement parts?
Genuine Beverage-Air parts are available through authorized distributors or directly from the manufacturer. Use the model number SPE48HC-18M-STL when ordering.
User questions about SPE48HC-18M-STL Beverage-Air
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual SPE48HC-18M-STL - Beverage-Air and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPE48HC-18M-STL by Beverage-Air.