XVR7104HE-4K-I3 - Video recorder Dahua Technology - Free user manual and instructions
Find the device manual for free XVR7104HE-4K-I3 Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4-Channel Network Video Recorder (NVR) |
| Model | XVR7104HE-4K-I3 |
| Brand | Dahua Technology |
| Video Input | 4 channels, up to 8MP (4K) |
| Video Compression | H.265, H.264, MJPEG |
| Recording Resolution | Up to 3840x2160 (4K) |
| HDD Support | 1 SATA port, up to 8TB |
| Video Output | 1 HDMI (4K), 1 VGA (1080p) |
| Audio | 1 channel audio input, 1 channel audio output |
| Alarm | 4 alarm inputs, 1 alarm output |
| Network | 1 RJ45 10/100/1000 Mbps Ethernet |
| Remote Access | Via web browser, mobile app (iOS/Android) |
| Power Supply | DC 12V, 2A (adapter included) |
| Power Consumption | ≤ 10W (without HDD) |
| Dimensions (W x D x H) | 260 x 230 x 45 mm |
| Weight | 1.5 kg (without HDD) |
| Operating Temperature | -10°C to 55°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Included Accessories | Power adapter, mouse, remote control, user manual |
| Cleaning Instructions | Use a dry, soft cloth to clean the exterior. Do not use liquids or cleaning agents. |
| Safety Precautions | Ensure proper ventilation. Do not cover vents. Use only the supplied power adapter. |
Frequently Asked Questions - XVR7104HE-4K-I3 Dahua Technology
How do I connect the XVR7104HE-4K-I3 to my network?
Connect an Ethernet cable from your router to the RJ45 port on the back of the NVR. The device supports DHCP, so it will automatically obtain an IP address. Use the Dahua Config Tool or mobile app to locate the device.
Which hard drives are compatible with this NVR?
The XVR7104HE-4K-I3 supports a single SATA III 3.5-inch hard drive. For reliable recording, use a surveillance-grade HDD (e.g., Seagate SkyHawk or WD Purple) with capacity up to 8TB.
How do I reset the device to factory default?
Press and hold the Reset button on the rear panel for 10 seconds while the NVR is powered on. Alternatively, access the menu via web interface and go to System -> System -> Default.
Can I view the NVR remotely?
Yes. Enable P2P or set up port forwarding on your router. Use the Dahua Smart Player or DMSS mobile app. Add the device by scanning the QR code on the NVR.
What is the maximum recording resolution?
The NVR supports recording up to 8MP (4K) at 15 fps per channel, or lower resolutions at higher frame rates. Actual performance depends on your camera capabilities.
How do I configure motion detection?
Log into the NVR web interface. Go to Storage -> Schedule and enable motion detection. Then set detection zones and sensitivity in Event -> Video Detection -> Motion Detection.
Does this NVR support audio recording?
Yes. The NVR has one audio input (RCA) and one audio output. Connect a compatible microphone or camera with audio to record audio alongside video.
What should I do if the NVR is not detecting my cameras?
Ensure cameras are connected via PoE or separate power. Check that the camera IP is in the same subnet as the NVR. Use Tools -> Search Device to manually add cameras.
How can I update the firmware?
Download the latest firmware from Dahua's official website. Extract the .bin file and upload it via Maintenance -> Upgrade -> Browse in the NVR web interface. Do not power off during update.
What are the default login credentials?
The default username is admin and the default password is admin. It is strongly recommended to change the password after first login.
User questions about XVR7104HE-4K-I3 Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video recorder in PDF format for free! Find your manual XVR7104HE-4K-I3 - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XVR7104HE-4K-I3 by Dahua Technology.