MXVR1004-GFWI - Video recorder Dahua Technology - Free user manual and instructions
Find the device manual for free MXVR1004-GFWI Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Brand | Dahua Technology |
| Model | MXVR1004-GFWI |
| Video Input Channels | 4 |
| Supported Hard Drive | 1 SATA III HDD, up to 10TB |
| Video Compression | H.265 / H.264 |
| Audio | 1-ch input, 1-ch output |
| Network Interface | 1 RJ45 10/100/1000 Mbps, built-in Wi-Fi (802.11 b/g/n) |
| PoE Ports | 4 PoE ports (IEEE 802.3af/at) |
| Recording Modes | Continuous, motion detection, schedule |
| Remote Access | Web browser, mobile app (iOS/Android) |
| Dimensions (W x D x H) | 260 mm x 220 mm x 44 mm |
| Weight | 1.5 kg (approx) |
| Power Supply | DC 12V, 2A |
| Power Consumption | ≤ 10 W (without HDD) |
| Operating Temperature | -10°C to 55°C |
| Maintenance | Keep clean, avoid dust; update firmware via network |
| Safety | Install in well-ventilated area; use surge protector |
| Spare Parts | Hard drive, power adapter, Ethernet cables |
| Repairability | Hard drive replacement; consult manual for details |
| Warranty | 2 years (subject to region) |
Frequently Asked Questions - MXVR1004-GFWI Dahua Technology
How do I connect cameras to the MXVR1004-GFWI?
Connect IP cameras to the PoE ports on the back panel. The NVR will automatically detect and configure them. Alternatively, add cameras via the network using the Web interface.
Can I access the NVR remotely?
Yes, you can access the NVR remotely via the Dahua mobile app (iOS/Android) or by logging into the web interface using the IP address. Ensure port forwarding is set up on your router.
What hard drive is compatible?
The MXVR1004-GFWI supports one 3.5-inch SATA III hard drive up to 10TB. For surveillance use, choose a WD Purple or Seagate SkyHawk series.
How do I reset the NVR to factory settings?
Press and hold the Reset button on the back panel for about 10 seconds until the system restarts. Alternatively, navigate to Settings > System > Default in the menu.
Why is the NVR not recording?
Check if the hard drive is installed and initialized. Ensure recording mode is enabled (e.g., Continuous or Motion). Verify that the date and time are set correctly.
Can I use Wi-Fi to connect the NVR to the network?
Yes, the MXVR1004-GFWI has built-in Wi-Fi. Go to Network Settings and scan for your Wi-Fi network. Use a stable connection for best performance.
How many cameras can I connect?
The NVR supports up to 4 IP cameras via the PoE ports. You can also add up to 4 additional cameras through the network (total 8 channels with expansion).
What is the maximum resolution supported?
The NVR supports cameras up to 8 megapixels (4K) at 15 fps, and 4 megapixels at 30 fps. Encoding is H.265/H.264.
How do I update the firmware?
Download the latest firmware from the Dahua website. In the NVR menu, go to Settings > System > Update and select the file. Do not power off during update.
Is the NVR compatible with ONVIF cameras?
Yes, the MXVR1004-GFWI supports ONVIF Profile S, allowing you to add third-party IP cameras. Manual addition may require entering camera IP and credentials.
User questions about MXVR1004-GFWI Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video recorder in PDF format for free! Find your manual MXVR1004-GFWI - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MXVR1004-GFWI by Dahua Technology.