AE-MD5043-SD/GLF - Video recorder Hikvision - Free user manual and instructions
Find the device manual for free AE-MD5043-SD/GLF Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Recorder (NVR/DVR) |
| Brand | Hikvision |
| Model | AE-MD5043-SD/GLF |
| Video Input Channels | 4 channels (estimated) |
| Compression Format | H.265+ / H.265 / H.264 |
| Recording Resolution | Up to 4MP (2560x1440) |
| Storage Capacity | Supports up to 2 HDDs, each up to 10TB |
| Power Supply | 12V DC, 2A (typical) |
| Power Consumption | ≤ 15W (without HDD) |
| Dimensions (W x D x H) | 315 x 240 x 50 mm |
| Weight | Approx. 1.5 kg (without HDD) |
| Network Interface | 1x RJ45 10/100/1000 Mbps |
| Video Output | 1x HDMI, 1x VGA |
| Audio Input/Output | 1x RCA in, 1x RCA out |
| PoE Ports | 4x PoE (802.3af/at) |
| Remote Access | Via Hik-Connect app or web browser |
| Alarm I/O | 4x alarm in, 1x alarm out |
| Operating Temperature | -10°C to 55°C |
| Maintenance & Cleaning | Keep in dry place, clean with soft cloth |
| Safety Features | Overvoltage protection, surge protection |
| Spare Parts & Repairability | Contact Hikvision service center |
| General Information | Supports motion detection, continuous recording |
Frequently Asked Questions - AE-MD5043-SD/GLF Hikvision
How do I reset the Hikvision AE-MD5043-SD/GLF to factory defaults?
To reset, press and hold the reset button on the back panel for 10 seconds while the device is powered on. The system will restart with default settings.
Can I access the recorder remotely via smartphone?
Yes, download the Hik-Connect app, log in with your Hikvision ID, and add the device by scanning the QR code or entering the serial number.
What is the maximum hard drive capacity supported?
The recorder supports up to 2 internal HDDs, each up to 10TB, for a total of 20TB storage.
How do I enable motion detection recording?
Log into the system menu, go to Event > Motion Detection, enable detection on desired channels, and set the recording schedule to Event Recording.
Why is my recorder not detecting cameras?
Ensure cameras are connected via PoE or separate power, and check that the IP addresses are in the same subnet. You can auto-scan in the camera management menu.
Can I use third-party IP cameras with this recorder?
Yes, but compatibility is best with ONVIF Profile S or RTSP compliant cameras. Add them manually via the Network Camera interface.
How do I update the firmware?
Download the latest firmware from Hikvision's official website, place the file on a USB drive, then go to System > Maintenance > Firmware Upgrade and select the file.
What should I do if the recorder beeps continuously?
A continuous beep indicates a hard drive error or fan failure. Check the HDD status in Storage > HDD Management and ensure all fans are spinning.
Can I view live footage without an internet connection?
Yes, connect a monitor directly via HDMI or VGA. The recorder displays live and recorded video even without network access.
How do I set up email alerts for alarms?
Go to System > Network > Email, configure SMTP settings (e.g., Gmail: smtp.gmail.com, port 587), enable email notification for events under Event > Alarm Response.
User questions about AE-MD5043-SD/GLF Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video recorder in PDF format for free! Find your manual AE-MD5043-SD/GLF - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AE-MD5043-SD/GLF by Hikvision.