SL906 DLTM 1000 - Range hood SIRIUS - Free user manual and instructions
Find the device manual for free SL906 DLTM 1000 SIRIUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Sirius |
| Model | SL906 DLTM 1000 |
| Width | 100 cm |
| Mounting Type | Wall-mounted |
| Control Type | Electronic push buttons |
| Number of Speeds | 3 + intensive |
| Maximum Extraction Rate | 650 m³/h |
| Noise Level | 55 dB (max speed) |
| Lighting | 2 x 20W halogen |
| Grease Filter Type | Aluminum mesh, washable |
| Duct Diameter | 150 mm |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 200 W |
| Total Power | 240 W |
| Weight | 14 kg |
| Energy Class | A+ |
| Maintenance | Clean grease filters monthly; replace carbon filters every 3-6 months |
| Safety Features | Overheat protection, motor auto-off |
| Spare Parts Availability | Filters, bulbs, motor available via authorized service |
| Warranty | 2 years |
Frequently Asked Questions - SL906 DLTM 1000 SIRIUS
How to install the range hood properly?
Ensure the hood is mounted at least 65 cm above gas cooktops or 50 cm above electric cooktops. Secure the bracket to a solid wall and connect the duct to an outside vent. Use the included mounting template for accurate placement.
How do I clean the grease filter?
Remove the aluminum mesh filter and wash it with warm soapy water or in a dishwasher. Allow it to dry completely before reinstalling. Clean the filter monthly to maintain efficiency.
When should I replace the charcoal filter?
If used in recirculation mode, replace the charcoal filter every 3 to 6 months depending on usage. The filter cannot be washed and must be replaced to ensure odor removal.
Why is the hood noisy?
Noise can be due to loose duct connections, a clogged filter, or improper installation. Check that the duct is secure and the filter is clean. The hood is designed to operate at 55 dB at maximum speed, which is normal.
How to replace the light bulb?
Disconnect power. Remove the light cover by prying it gently. Replace the 20W halogen bulb with a compatible one (G4 base). Reattach the cover and restore power.
What is the recommended maintenance schedule?
Grease filters: clean monthly. Charcoal filters: replace every 3-6 months. Wipe the exterior with a damp cloth weekly. Check duct connections annually for airtightness.
Can I use the hood without a duct?
Yes, the hood can operate in recirculation mode using charcoal filters. Ensure you have installed the carbon filter and that the outlet is open to the room.
What does the intensive speed do?
The intensive speed provides a boost for rapid smoke removal, usually running for 10 minutes then returning to the previous speed. It is ideal for heavy cooking.
How to troubleshoot the hood not turning on?
Check the power supply and circuit breaker. Ensure the plug is fully inserted. If using a remote, replace batteries. If still not working, contact service.
Are spare parts available for this model?
Yes, spare parts such as filters, bulbs, and motors are available through authorized Sirius service centers. Use the model number SL906 DLTM 1000 when ordering.
User questions about SL906 DLTM 1000 SIRIUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual SL906 DLTM 1000 - SIRIUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SL906 DLTM 1000 by SIRIUS.