Show Pro Pet WA9265 - Razor WAHL - Free user manual and instructions

Type of product	Pet grooming shaver
Brand	Wahl
Model	Show Pro Pet WA9265
Power supply	Rechargeable lithium-ion battery
Battery life	Up to 60 minutes
Charging time	Approximately 2 hours
Blade material	Stainless steel, self-sharpening
Cutting length adjustment	Adjustable from 0.8 mm to 3 mm
Dimensions (length x width x height)	15.2 cm x 4.5 cm x 3.8 cm
Weight	190 g (0.42 lb)
Cordless operation	Yes, fully cordless
Noise level	Low noise, < 60 dB
Washable	Removable blade head for washing; body not waterproof
Maintenance	Oil the blades after each use; clean with brush
Safety features	Automatic shut-off after 10 minutes of inactivity; overheat protection
Accessories included	Charging stand, cleaning brush, oil, blade guard
Repairability	Replacement blades and battery available; user-replaceable
Intended use	Pet grooming for dogs and cats
Color	White and gray
Warranty	2-year limited warranty

Frequently Asked Questions - Show Pro Pet WA9265 WAHL

How do I clean the Wahl Show Pro Pet WA9265?

Remove the blade head and rinse it under running water. Dry thoroughly and apply a drop of oil to the blades before reattaching. The main body should be wiped with a damp cloth only.

Can I use this shaver on wet pets?

No, the pet should be dry and clean before using the shaver. Using it on wet pets can damage the device and cause skin irritation.

How long does the battery last?

The battery provides up to 60 minutes of continuous use on a full charge.

What is the charging time?

The full charging time is approximately 2 hours.

How do I adjust the cutting length?

Use the thumb wheel on the side of the shaver to adjust the cutting length from 0.8 mm to 3 mm.

Is the Wahl Show Pro Pet WA9265 suitable for cats?

Yes, it is designed for both dogs and cats. Use a lower cutting length for smaller pets.

What accessories are included in the box?

The package includes the shaver, charging stand, cleaning brush, blade oil, and a blade guard.

Can I replace the blades yourself?

Yes, the blades are replaceable. You can purchase replacement blades from Wahl's official website or authorized retailers.

What should I do if the shaver overheats?

If the shaver becomes too hot, it will automatically shut off. Allow it to cool down for 15 minutes before using again.

How do I know when the battery needs charging?

The LED indicator will flash red when the battery is low. Charge the shaver fully until the LED turns green.

USER MANUAL Show Pro Pet WA9265 WAHL

Cleaning your Wahl clippers blades

WAHL®

EVERYDAY CLEANING

Your tools should be cleaned and sanitized after every client to prevent the spread of infectious skins diseases.

Start by brushing off excess hair on your blades.

Spray your clipper/trimmer blades with Wahl Clini-Clip, and allow to sit before wiping off any excess with a clean towel.

Ensure you also spray your combs, brushes and attachment combs with Clini-Clip as well.

Make sure you oil your blades immediately after using Clini-Clip with Wahl Blade Oil.

ANIMAL TOOL CARE

Cleaning your Wahl clippers blades

WAHL®

ONCE A MONTH CLEANING

All Wahl Clippers are tested before they leave our factory. Often testing materials or grinding compound may be found on the blades. This is easily cleaned off using the enclosed blade cleaning brush.

Your Clipper blades should be removed periodically (at least once a month) to allow the cut hair to be cleaned out from under the blades.

First, check to see what type of clipper & blade you have. It will be either one of the two below:

1. Snap on/off

This will be the case for most of our Animal Clippers, UNLESS it has a taper lever. If your clipper does not have a taper lever, simply snap the blade off and clean any loose hair that has fallen into the now-open section of the clipper. Once this is done, simply re-attach your blade!

2. Screws blades

If your clipper does have a taper lever, then you will be required to screw the blades off for cleaning. Simply use a screwdriver to undo the blade screws and then remove the blades. Remove the sponge and clean it, plus any hair that is caught in the clipper. Reverse the process to re-attach the blades. To see a video on how to align your blades, click here: https://au.wahl.com/Home/Education-Services/How-To-Tutorials.aspx

How to clean your snap on/off blade: https://au.wahl.com/Home/Education-Services/How-To-Tutorials.aspx

How to clean your 5 in 1 Blade: https://au.wahl.com/Home/Education-Services/How-To-Tutorials.aspx

ANIMAL TOOL CARE

Oiling your Wahl clippers blades

WAHL®

HOW TO OIL YOUR BLADES

With the blade directed downwards, turn the clipper/trimmer on.

Apply three drops of oil – one on each side and one in the middle.

With the clipper/trimmer still on, move the taper lever back and forth to work oil into blade.

Turn off clipper/trimmer and blot excess oil with clean towel.

Always use Wahl Clipper Oil on your Wahl tools as it is specifically designed to extend the life of your blades.

How to oil your blade:

https://au.wahl.com/Home/Education-Services/How-To-Tutorials.aspx