LMC+ - Processor Solid State Logic - Free user manual and instructions
Find the device manual for free LMC+ Solid State Logic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Dynamics Processor |
| Brand | Solid State Logic |
| Model | LMC+ |
| Form Factor | 19-inch rackmount, 1U |
| Dimensions (W x D x H) | 483 x 150 x 44 mm |
| Weight | 2.5 kg |
| Power Supply | 100-240 V AC, 50/60 Hz, 20 W |
| Inputs | 2x XLR balanced, 2x TRS balanced |
| Outputs | 2x XLR balanced, 2x TRS balanced |
| Dynamic Range | >120 dB |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Processing Modes | Compression, Limiting, Expansion, De-essing |
| Number of Bands | 4 (Multi-band configuration) |
| Controls | Threshold, Ratio, Attack, Release, Makeup Gain, Blend |
| Metering | 8-segment LED for gain reduction and output level |
| Protection Features | Overload protection, RF filtering |
| Cleaning Instructions | Wipe with a dry cloth; do not use solvents |
| Operating Temperature | +5°C to +40°C |
| Storage Temperature | -20°C to +60°C |
Frequently Asked Questions - LMC+ Solid State Logic
How do I connect the LMC+ to my audio interface?
Use balanced XLR or TRS cables to connect the outputs of your interface to the inputs of the LMC+. Ensure both devices are powered off during connection.
What is the difference between compression and limiting on this unit?
Compression applies lower ratios (up to 10:1) for dynamic control, while limiting uses ratios above 10:1 to prevent signals from exceeding a set threshold. The LMC+ offers both modes.
Can I use the LMC+ as a stereo processor?
Yes, the LMC+ has a stereo link mode that allows you to process stereo signals with identical settings on both channels to maintain the stereo image.
How do I reset the unit to factory defaults?
Press and hold the 'Bypass' button while powering on the unit. Hold until all LEDs flash, then release. This restores factory settings.
What does the 'Blend' control do?
The Blend control mixes the processed and unprocessed signals. At 0% you hear only the dry signal, at 100% you hear only the processed signal. Useful for parallel compression.
My LMC+ is not powering on. What should I check?
First, ensure the power cable is securely connected to both the unit and a working outlet. Check the fuse on the power inlet; if blown, replace with the specified rating (e.g., T1A 250V). If the issue persists, consult a technician.
Can I use the LMC+ on a mixing board insert?
Yes, the LMC+ can be used as an insert processor. Connect the send from your console to the input of the LMC+ and return the output to the console's return jack.
How do I clean the front panel?
Use a soft, dry microfiber cloth to gently wipe the front panel. Avoid using liquids, abrasives, or solvents as they may damage the finish.
What is the warranty period for the LMC+?
Solid State Logic offers a limited warranty of 2 years from the date of purchase. Register your product on their website for warranty validation.
Can the LMC+ be used on a bus for group processing?
Absolutely. The LMC+ is ideal for bus processing, such as on a drum or vocal submix. Its stereo linking and multi-band capabilities provide precise control.
User questions about LMC+ Solid State Logic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual LMC+ - Solid State Logic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LMC+ by Solid State Logic.