AK-Q300BC01 - Air Conditioning LG - Free user manual and instructions
Find the device manual for free AK-Q300BC01 LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner |
| Model | AK-Q300BC01 |
| Brand | LG |
| Cooling Capacity | 30000 BTU/h (2.5 tons) |
| Indoor Unit Dimensions (WxHxD) | 1050 x 370 x 260 mm |
| Outdoor Unit Dimensions (WxHxD) | 950 x 700 x 330 mm |
| Indoor Unit Weight | 15.5 kg |
| Outdoor Unit Weight | 49 kg |
| Power Supply | 220-240V ~ 50Hz |
| Rated Power Input (Cooling) | 2700 W |
| Energy Efficiency Ratio (EER) | 3.2 |
| Refrigerant | R-410A |
| Air Flow Rate (Indoor) | 1500 m³/h |
| Noise Level Indoor (Low/High) | 32 / 48 dB(A) |
| Noise Level Outdoor | 55 dB(A) |
| Filter Type | Washable, Anti-bacterial |
| Functions | Cooling, Dehumidification, Fan, Auto, Sleep, Timer |
| Remote Control | Included |
| Installation | Requires professional installation |
| Maintenance | Clean filter every 2 weeks |
| Safety Features | Auto restart, overheat protection |
| Repairability Index | 8.5/10 |
Frequently Asked Questions - AK-Q300BC01 LG
How often should I clean the air filter?
Clean the air filter every 2 weeks under normal usage. A dirty filter reduces efficiency and may freeze the coil.
What does the 'Timer' function do?
The Timer allows you to set the air conditioner to turn on or off automatically after a specified time delay (e.g., 1-24 hours).
Is the refrigerant R-410A?
Yes, this model uses R-410A refrigerant, which is environmentally friendly and ozone-safe.
How do I reset the remote control?
Remove the batteries, wait 1 minute, reinsert them, and point the remote at the unit. If still unresponsive, refer to the manual for factory reset procedure.
What does error code 'E1' mean?
Error code 'E1' typically indicates a room temperature sensor fault. Contact a service technician if it persists.
Can I install this air conditioner myself?
Professional installation is strongly recommended due to the need for electrical wiring, refrigerant handling, and proper drainage.
What is the power consumption in standby?
Standby power consumption is approximately 5 W. Unplug the unit if not used for extended periods to save energy.
How do I switch between cooling and fan mode?
Press the Mode button on the remote control repeatedly to cycle through Cool, Fan, Dry, and Auto modes.
What is the maximum pipe length between indoor and outdoor units?
The maximum pipe length is 15 meters. Exceeding this may reduce performance and require additional refrigerant.
Does this model have a sleep mode?
Yes, the Sleep function gradually adjusts the temperature to provide comfort while saving energy throughout the night.
User questions about AK-Q300BC01 LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual AK-Q300BC01 - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AK-Q300BC01 by LG.