WT-3143AX1 - Clock LA CROSSE TECHNOLOGY - Free user manual and instructions
Find the device manual for free WT-3143AX1 LA CROSSE TECHNOLOGY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Atomic Analog/Digital Clock |
| Brand | La Crosse Technology |
| Model | WT-3143AX1 |
| Dimensions | Approximately 7 x 7 x 1 inches (18 x 18 x 2.5 cm) |
| Weight | About 0.5 lbs (227 g) |
| Power Supply | 2-3 AAA alkaline batteries (not included) |
| Time Synchronization | WWVB atomic radio signal (60 kHz) |
| Indoor Temperature Range | 0°F to 140°F (-18°C to 60°C) |
| Indoor Humidity Range | 20% to 95% Relative Humidity |
| Alarm Function | Single daily alarm with snooze |
| Display Type | LCD with time, date, temperature, humidity |
| Calendar | Day of week and date display |
| DST Setting | Automatic Daylight Saving Time adjustment |
| Time Zone Setting | Selectable time zones (AST, EST, CST, MST, PST, AKT, HAT) |
| Mounting Options | Desk stand or wall mount (keyhole slot) |
| Battery Life | Approximately 12 months with good quality alkaline batteries |
| Cleaning and Maintenance | Clean with a soft, dry cloth; do not use abrasive cleaners |
| Safety Precautions | Keep away from water, extreme heat, and children under 3 years (small parts) |
| Spare Parts | AAA batteries only; no user-serviceable parts |
| Repairability | Do not open; no replaceable components except batteries |
| Certifications | FCC compliant |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - WT-3143AX1 LA CROSSE TECHNOLOGY
How do I set the time on my La Crosse Technology WT-3143AX1 clock?
The clock automatically sets itself when it receives the WWVB atomic signal. If you need to manually set it, press and hold the SET button for 3 seconds to enter manual setting mode. Use the +/- buttons to adjust the time, date, and time zone. Press SET again to save and exit.
Why isn't my clock receiving the atomic signal?
Place the clock near a window facing Colorado (where the WWVB transmitter is located). Avoid metal objects and electronic interference. The signal may be weaker during the day; try nighttime when reception is better. Ensure you are within the signal range (about 2000 miles).
How do I change the batteries?
Open the battery compartment on the back of the clock. Remove old batteries and install 2 new AAA alkaline batteries (or 3 depending on model) with correct polarity. Replace the cover. The clock will then attempt to sync with the atomic signal.
What does the 'DST' indicator mean?
DST stands for Daylight Saving Time. The clock automatically adjusts for DST. If you live in an area that does not observe DST, you can disable this feature in the settings menu.
How do I set the alarm?
Press the ALARM button once to view alarm time. Press and hold ALARM for 3 seconds until the hour flashes. Use +/- to adjust hour, press ALARM again to set minutes. Press SET to confirm. To enable alarm, toggle the alarm switch (if available) or press the ALARM ON/OFF button.
My clock is showing incorrect time. How do I reset it?
Press the RESET button with a paper clip (located in the battery compartment or on the back). This will clear all settings and force the clock to re-sync with the atomic signal. Alternatively, remove batteries for 10 seconds and reinsert.
Can I mount this clock on the wall?
Yes, the WT-3143AX1 has a keyhole slot on the back for wall mounting. Ensure the wall mount screw is level and secure. The clock also includes a foldable stand for desk placement.
What is the temperature and humidity range?
The clock displays indoor temperature from 0°F to 140°F and humidity from 20% to 95%. Values outside this range may show 'LLL' or 'HHH'. The sensor is located inside the clock.
The clock is not responding to buttons. What should I do?
First, try replacing the batteries with fresh ones. If still unresponsive, press the RESET button. If that fails, remove batteries for 30 seconds and reinsert. Check for any stuck buttons or debris.
How do I clean the clock?
Use a soft, dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Avoid spraying liquid directly on the clock. For stubborn dirt, slightly dampen the cloth and wring well.
User questions about WT-3143AX1 LA CROSSE TECHNOLOGY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Clock in PDF format for free! Find your manual WT-3143AX1 - LA CROSSE TECHNOLOGY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WT-3143AX1 by LA CROSSE TECHNOLOGY.