DSP-3100 - Audio Paradigm - Free user manual and instructions

Product Type	Powered Subwoofer with DSP
Model	DSP-3100
Dimensions (HxWxD)	18.5 x 14.2 x 16.3 inches
Weight	42.5 lbs
Power Output	300W RMS (600W peak)
Frequency Response	20 Hz - 200 Hz
Driver Size	10-inch
Enclosure Type	Bass-reflex (ported)
Inputs	LFE, Stereo RCA, Speaker-level
Outputs	LFE, Stereo RCA
Controls	Volume, Crossover, Phase (0/180), Auto-On
DSP Features	Room correction, EQ presets, limiter
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	Standby < 0.5W, max 400W
Maintenance & Cleaning	Wipe with dry cloth; do not use solvents
Safety	Do not expose to rain or moisture; unplug during storms
Spare Parts	Fuse (internal), foam grille (available through support)
Repairability	Service by authorized technicians; user-replaceable fuse
Included Accessories	Power cord, user manual, quick setup guide

Frequently Asked Questions - DSP-3100 Paradigm

How do I set the crossover frequency on the Paradigm DSP-3100?

Use the Crossover knob on the rear panel. Typically set it to 80 Hz for THX standards or match your main speakers' low-frequency limit.

What is the phase switch for?

The Phase switch (0/180) adjusts timing alignment with your main speakers. Use the setting that gives the strongest bass at your listening position.

Can I use the DSP-3100 with a stereo receiver?

Yes, connect via Stereo RCA inputs or Speaker-level inputs if your receiver lacks a subwoofer output.

How do I enable auto-on mode?

Set the Auto-On switch to 'Auto'. The subwoofer will power on when it detects a signal and enter standby after 15 minutes of inactivity.

What room correction features does the DSP offer?

The built-in DSP includes room correction filters and EQ presets to optimize bass response. Adjust via the rear panel or optional remote.

Why is my subwoofer not producing sound?

Check that the power is on, volume is turned up, and the correct input is selected. Ensure the Auto-On is not in standby.

What is the maximum power handling?

The amplifier delivers 300W RMS continuously and 600W peak. Do not exceed the rated input signal to avoid distortion.

How do I clean the subwoofer?

Wipe the cabinet with a dry, lint-free cloth. Do not use liquids or abrasive cleaners. Clean the grille with a vacuum on low suction.

Can I replace the fuse myself?

Yes, the fuse is located in the power inlet module. Use the same type and rating as specified on the device (e.g., T2.5A 250V).

What are the dimensions and weight?

Dimensions are 18.5 x 14.2 x 16.3 inches and weight is 42.5 lbs. Ensure adequate space for ventilation.

USER MANUAL DSP-3100 Paradigm

Modern minimalist living room interior with gray sofas, wooden flooring, and large white pendant lights (no text or symbols visible)

Shown: DSP-3400
Discreet installation: DSP-3400 inside a cabinet

DSP Series

"IMPRESSIVE ... can handle the most dynamic low-frequency sound passages ... a great value for the higher-end user looking for a subwoofer that can really pump out clear and tight deep bass in any size room without spending a fortune."

– Robert Silva, about.com

Back panel of a handheld electronic device labeled 'Piradigm', showing internal components and wiring (no readable text beyond label)

Advanced High-Power Class-D™ Amplifiers deliver massive amounts of high-current power with minimal distortion.

DSP-3100: 600 watts Dynamic Peak/200 watts RMS.

DSP-3200: 900 watts Dynamic Peak/300 watts RMS.

DSP-3400: 900 watts Dynamic Peak/300 watts RMS.

Forward-Firing Drivers with Advanced CAP ^™ Carbon/ Aramid-Fiber Polypropylene Cones. Advanced cone material combines exceptional stiffness/low mass with excellent internal damping for tremendous freedom from unwanted resonances.

Advanced Suspension Design and Large Magnet Structures encourage extended cone excursion while maintaining superb control over cone movement.

High-Efficiency Dual-Ported Design. High-velocity low-noise ports with critically flared openings serve to reduce turbulence distortion. Front-ported design accommodates installation flexibility.

Removable Grilles with SVS ^™ Slot Ventilation System allow release of the enormous air pressure generated by these high-output designs.

Cross-sectional diagram of a mechanical device showing internal components and housing (no text or symbols)

Acoustically Inert MDF Enclosures serve to limit unwanted panel resonances and vibrations, ensuring clean, clear and very articulate bass performance.

Paradigm's Proprietary Digital Signal Processing (DSP) Design boasts sophisticated algorithms which "shape" frequency response, ensuring accurate, consistent and musical bass performance without audible distortion, even when the subwoofers are playing at the loudest levels (see graph below).

Typical Subwoofer Response

Paradigm's (DSP) Digital Signal Processing

Three black DSP speakers (DSP-3100, DSP-3200, DSP-3400) displayed against a reflective surface with abstract wave patterns and a labeled 'Black Ash' in the corner (no text on devices)

Big Bass for a Small Space

High-power DSP Series subwoofer are the result of Paradigm's multi-year R&D effort to achieve exceptional high performance while accommodating the growing desire for installation flexibility. Not everyone wants a high-performance subwoofer on full display, so models are front-firing and front-ported with removable grilles, making them ideal for "hidden" installations. For those who want it all ... exceptional high performance (including the sonic benefits of digital signal processing!), a smaller footprint, flexible placement options and killer price points, DSP subwoofer fit the bill.

Control Facilities:

• Auto On/Off
• Subwoofer Level
• Subwoofer Cut-Off Frequency (continuously variable 35 Hz – 150 Hz); Bypass Option
• Sub/Sat Phase Alignment (0° or 180°)
  • USB Port/PBK Interface

Input Facilities:

• Line-level Inputs

PBK READY

Optional Paradigm Perfect Bass Kit™ digital room correction system. Full details on page 26.

PBK™ READY

DSP Series	DSP-3100 DSP-3200 DSP-3400
Design	Single driver, bass reflex, dual high-velocity low-turbulence resistive ports, built-in amplifier, USB Port/PBK Interface	Single driver, bass reflex, dual high-velocity low-turbulence resistive ports, built-in amplifier USB Port/PBK Interface	Single driver, bass reflex, dual high-velocity low-turbulence resistive ports, built-in amplifier USB Port/PBK Interface
Amplifier: High-Current, Discrete Output	600 watts Dynamic Peak/ 200 watts RMS Sustained	900 watts Dynamic Peak/ 300 watts RMS Sustained	900 watts Dynamic Peak/ 300 watts RMS Sustained
Amplifier Design Features	Auto-On/Off, soft clipping	Auto-On/Off, soft clipping	Auto-On/Off, soft clipping
Bass Driver	255-mm (10 in) CAPTM cone, ceramic/ferrite magnet, 50-mm (2 in) 4-layer voice-coil, AVSTM die-cast heatsink chassis	305-mm (12 in) CAPTM cone, ceramic/ferrite magnet, 50-mm (2 in) 4-layer voice-coil, AVSTM die-cast heatsink chassis	355-mm (14 in) CAPTM cone, ceramic/ferrite magnet, 50-mm (2 in) 4-layer voice-coil, dual spiders, AVSTM die-cast heatsink chassis
Low-Frequency Extension*	24 Hz (DIN)	22 Hz (DIN)	19 Hz (DIN)
Subwoofer Cut-Off Frequency	Variable 35 Hz – 150 Hz; Bypass option	Variable 35 Hz – 150 Hz; Bypass option	Variable 35 Hz – 150 Hz; Bypass option
Sub/Sat Phase Alignment	Variable 0° – 180°	Variable 0° – 180°	Variable 0° – 180°
Line-Level Inputs	RCA. (L/R-Mono) for L/R line out or Sub-Out/LFE-Out of receiver/processor or other line-level source	RCA. (L/R-Mono) for L/R line out or Sub-Out/LFE-Out of receiver/processor or other line-level source	RCA. (L/R-Mono) for L/R line out or Sub-Out/LFE-Out of receiver/processor or other line-level source
Height, Width, Depth (height includes feet; depth includes grille and amplifier)	41.3 cm x 31.1 cm x 42.5 cm 16-1/4 in x 12-1/4 in x 16-3/4 in	46.4 cm x 35.6 cm x 49.5 cm 18-1/4 in x 14 in x 19-1/2 in	56.5 cm x 40.0 cm x 53.2 cm 22-1/4 in x 15-3/4 in x 21 in
Weight (unpacked)	18.2 kg/40 lb each	24.5 kg/54 lb each	29.5 kg/64.8 lb each
Finish	Black Ash	Black Ash	Black Ash