Essentials Sub 10 - Speaker Paradigm - Free user manual and instructions
Find the device manual for free Essentials Sub 10 Paradigm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Speaker Driver | 10-inch (254mm) polypropylene cone |
| Amplifier Power | 150W RMS (300W peak) |
| Frequency Response | 27 Hz - 150 Hz |
| Low Pass Filter | Variable 50-150 Hz |
| Phase Switch | 0° or 180° |
| Inputs | RCA L/R line level, LFE |
| Outputs | RCA L/R line level |
| Dimensions (H x W x D) | 330 x 330 x 380 mm (13 x 13 x 15 in) |
| Weight | 13.6 kg (30 lbs) |
| Power Supply | 120V / 60 Hz (NA) or 230V / 50 Hz (EU) |
| Power Consumption | 250W max |
| Standby Power | < 0.5W |
| Main Functions | Auto on/off, volume control, crossover adjustment, phase switch |
| Cleaning Instructions | Wipe with a dry, soft cloth. Do not use abrasive cleaners or liquids. |
| Safety Precautions | Do not expose to rain or moisture. Keep ventilation slots uncovered. |
| Repairability | Contact authorized Paradigm service center for repairs. Do not open chassis. |
| Spare Parts | Available through Paradigm authorized dealers. |
| General Information | Part of Paradigm Essentials series; designed for home theater and music. |
Frequently Asked Questions - Essentials Sub 10 Paradigm
How do I connect the Paradigm Essentials Sub 10 to my receiver?
Use a monaural RCA cable from the subwoofer output on your receiver to the LFE input on the subwoofer. Alternatively, you can use the left/right line-level inputs with a Y-adapter.
Where is the best placement for the subwoofer?
Place the subwoofer near a wall or corner for maximum bass output. Avoid placing it directly in a corner if it sounds boomy. Experiment with placement to achieve balanced bass.
How do I set the crossover frequency?
Set the low-pass filter to around 80 Hz if using with a typical home theater system. Adjust to match your main speakers' capabilities. For best results, let your AV receiver handle crossover if it has a dedicated subwoofer output.
What does the phase switch do?
The phase switch (0° or 180°) aligns the subwoofer's output with your main speakers. Flip it to the position that gives the fullest bass at your listening position. You may need to listen to music with strong bass to decide.
Why is my subwoofer not turning on?
Ensure the power cord is securely plugged in and the power outlet is active. The subwoofer has an auto-on feature; try playing audio at moderate volume. If still off, check the fuse on the back panel.
How do I clean the subwoofer cabinet?
Wipe the cabinet with a dry, soft cloth. Do not use any liquids or chemicals. Vacuum the front grille gently if needed.
Can I use the subwoofer in a large room?
Yes, the 10-inch driver and 150W amplifier can fill medium to large rooms. For very large spaces, consider adding two subwoofers or a more powerful model.
What is the warranty coverage?
Paradigm offers a limited warranty; typically 2 years for electronics and 5 years for drivers. Check your local dealer or manual for exact terms.
How do I reset the subwoofer to factory settings?
There is no user reset. Simply set all controls to neutral positions: volume at 12 o'clock, crossover to 80 Hz, phase to 0°. Unplug and replug power after a few minutes.
The subwoofer makes a humming noise. What should I do?
A ground loop may be the cause. Try plugging all audio components into the same power strip. If the hum persists, use a ground loop isolator on the RCA cable. Also check cable connections.
User questions about Essentials Sub 10 Paradigm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Essentials Sub 10 - Paradigm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Essentials Sub 10 by Paradigm.