Pyle

PLMRMB2CB - Receiver Pyle - Free user manual and instructions

Find the device manual for free PLMRMB2CB Pyle in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Pyle PLMRMB2CB - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Marine Bluetooth Receiver
Brand Pyle
Model PLMRMB2CB
Dimensions (Approx.) 7.0 x 2.0 x 6.0 inches
Weight 1.5 lbs
Power Supply 12V DC
Bluetooth Yes, with A2DP for wireless audio streaming
USB Port Yes, for music playback from USB drives
AUX Input Yes, 3.5mm stereo input
AM/FM Tuner Yes, with preset memory
Water Resistance IPX5 (splash resistant)
Remote Control Included
Display LCD with backlight
Output Power 4 x 50 Watts (max)
Frequency Response 20Hz - 20kHz
Signal-to-Noise Ratio > 90 dB
Supported Audio Formats MP3, WMA, WAV
Operating Temperature -20°C to 60°C
Safety Cautions Disconnect battery before installation; avoid exposure to direct water jets
Maintenance Wipe with a soft damp cloth; do not use solvents
Spare Parts & Repairability Contact Pyle support for service; unit is not user-serviceable

Frequently Asked Questions - PLMRMB2CB Pyle

How do I connect my phone via Bluetooth?
Press the BT button on the receiver or remote to enter pairing mode. On your phone, search for devices and select PLMRMB2CB. If prompted, enter code 0000. Once connected, audio streaming will work automatically.
What is the maximum USB drive capacity supported?
The USB port supports drives up to 32GB formatted in FAT32. Larger drives may not be recognized or may cause errors.
How do I reset the receiver to factory settings?
Press and hold the MENU button for 5 seconds until the display shows 'RESET'. Confirm with the volume knob. Alternatively, disconnect the battery for 10 seconds.
Is this receiver waterproof?
It has an IPX5 rating, meaning it is protected against splashing water from any direction. Do not submerge or use high-pressure water directly.
Can I control the receiver with steering wheel controls?
Yes, it is steering wheel control ready. You will need an adapter (sold separately) compatible with your vehicle's make and model.
How do I set the clock?
Press the DISP/SET button until the clock flashes. Use the TUNE/TRACK knob to adjust hours, then press again to set minutes. Press DISP/SET to confirm.
Does it support hands-free calling?
Yes, it supports hands-free calling via Bluetooth. When a call comes in, press the PHONE button to answer. The built-in microphone allows clear conversation.
What wire colors are used for installation?
Refer to the manual for complete wiring. Typical colors: Yellow (constant 12V), Red (switched 12V), Black (ground), White/White+black (front left), Grey/Grey+black (front right), Green/Green+black (rear left), Purple/Purple+black (rear right).
How do I improve FM reception?
Make sure the antenna is properly connected and fully extended. If reception is weak, consider installing an external marine antenna for better range.
Can I play music from an SD card?
No, the PLMRMB2CB does not have an SD card slot. Use the USB port or AUX input for external audio sources.

User questions about PLMRMB2CB Pyle

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Receiver in PDF format for free! Find your manual PLMRMB2CB - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLMRMB2CB by Pyle.

USER MANUAL PLMRMB2CB Pyle

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Pyle

Model : PLMRMB2CB

Category : Receiver