2602DF - Security Camera FIRST ALERT - Free user manual and instructions

Product Type	Security Camera
Brand	First Alert
Model	2602DF
Resolution	1080p Full HD
Field of View	120° diagonal
Night Vision	Up to 30 ft with IR LEDs
Connectivity	Wi-Fi 802.11 b/g/n (2.4 GHz)
Power Source	DC 5V 1A AC adapter (included) or rechargeable battery
Dimensions (without mount)	7.5 x 7.5 x 12.5 cm (2.95 x 2.95 x 4.92 in)
Weight	200 g (7.05 oz)
Audio	Two-way audio with built-in microphone and speaker
Motion Detection	Yes, with push notifications
Storage	Cloud storage (subscription) or microSD card up to 128 GB
Operating Temperature	-10°C to 45°C (14°F to 113°F)
Weather Resistance	Indoor use only
Mounting	Tabletop or wall mount (bracket included)
Mobile App	Compatible with First Alert app (iOS and Android)
Maintenance	Clean lens with soft, dry cloth; avoid harsh chemicals
Security	Encrypted Wi-Fi connection and password protected
Spare Parts & Repairability	No user-serviceable parts; contact support for repairs
General Information	User manual available for free download at notice-facile.com

Frequently Asked Questions - 2602DF FIRST ALERT

How do I set up my First Alert 2602DF security camera?

Download the First Alert app, create an account, and follow the in-app instructions. Plug in the camera, wait for the LED to flash, then connect to the camera’s Wi-Fi network to complete setup.

Can I view the camera feed remotely?

Yes, after setup you can view live video from anywhere using the First Alert app on your smartphone or tablet.

How do I reset the camera to factory settings?

Locate the reset button (usually a pinhole) on the camera. Press and hold it for about 10 seconds until the LED changes color. The camera will restart and be ready for setup.

What is the maximum microSD card size supported?

The camera supports microSD cards up to 128 GB for local storage. Format the card to FAT32 before use.

Does the 2602DF support two-way audio?

Yes, it has a built-in microphone and speaker, allowing you to hear and speak through the app.

How can I improve night vision quality?

Ensure the lens is clean and there are no obstructions. Night vision range is up to 30 feet in complete darkness. Avoid pointing the camera at reflective surfaces.

Can I use the camera outdoors?

No, the 2602DF is designed for indoor use only. Using it outdoors may damage the camera and void the warranty.

What should I do if the camera is not connecting to Wi-Fi?

Check that your Wi-Fi network is 2.4 GHz (not 5 GHz). Move the camera closer to the router during setup. Restart the camera and router if needed.

How do I enable motion alerts?

In the app, go to camera settings and enable motion detection. You can adjust sensitivity and choose to receive push notifications when motion is detected.

Is cloud storage free?

Basic cloud storage is available with a free trial. After the trial, a subscription is required. Local storage via microSD card is free and does not require a subscription.

USER MANUAL 2602DF FIRST ALERT

MANUAL # M08-0505-004

Operation & Installation Guide

First Alert®

2601DF | 2602DF | 2603DF

Three black plastic storage units with visible labels, arranged side by side (no text or symbols on the boxes)

www.FirstAlert.com

Waterproof Fire Safe

FIRE RESISTANT

MEDIA PROTECTION

WATERPROOF

MANUAL # M08-0505-004

INDEX

Proper Use of Your Safe....1

Opening Your Safe for the First Time 3-4

Programming a Personal Passcode 4

Safe Care & Maintenance / Consumer Affairs 5-6

Safe Identification Record....6

Ordering Replacement Entry Keys 7

Limited Warranty 8

Congratulations!

Your new First Alert ^® Waterproof Fire Safe will provide years of secure storage for valuables and important documents. This safe has been built with the highest manufacturing standards to ensure maximum user satisfaction. With proper care, your First Alert ^® safe will provide peace of mind for many years to come.

PACKAGE CONTENTS

1 First Alert* Waterproof Fire Resistant Safe

1 Operation & Installation Guide

4 AA Batteries

2 Entry Keys

PROPER USE OF YOUR SAFE

First Alert® Waterproof Fire Safes protect paper records and other valuable documents. UL testing shows that the interior temperature remains below 350°F for 30 minutes during a fire up to 1550°F. Your safe is protected by our Lifetime After Fire Replacement Guarantee. Please see details in that section on page 8.

Waterproof – Your new First Alert® Waterproof Fire Safe is designed to help protect your valuables from fire and water. This product has been validated to be waterproof when fully submerged for up to 1 hour and is not intended for long term underwater exposure.

Moisture Warning

We recommend that you place delicate items such as pictures or intricate jewelry into an air-tight container before storing them in your safe. Avoid placing your safe in areas of high humidity. For optimum performance, the safe should be opened and aired out for at least 20 minutes every two (2) weeks.

Firearms Warning

This safe is not designed to store medication, items with combustible content, guns or other weapons.

To clean your safe, wash off with a damp cloth and dry. Never use paint thinners or chemical solvents, as they can permanently damage the finish.

FOR YOUR PROTECTION

√ Always store keys away from safe, NEVER INSIDE.
√ Record all safe identification numbers on Safe Identification Record on page 6.
√ Save this manual and NEVER keep it inside the safe. DO NOT DISCARD!

IMPORTANT: ALWAYS STORE SAFE FLAT

Always store your safe in a flat, horizontal position so that the contents remain protected during a fire. Storing the unit on the sides or ends WILL NOT PROTECT CONTENTS during a fire.

OPENING YOUR SAFE FOR THE FIRST TIME

Batteries and Keys

Remove four (4) batteries and two (2) Entry Keys. They are located in the packing material. Remove them before discarding the box.

Installing Batteries

① Locate the battery cover on the top of the lid.
② Slide the cover off the battery compartment.
3 Properly insert batteries, noting the +/- directions. The LED on top of the lid will blink red and green three (3) times.
④ Replace cover and close the lid.

NOTE: Clean the battery contacts in the battery compartment and on the batteries before installing new batteries.

The pre-set factory code for your safe is:

OPENING & CLOSING YOUR SAFE

Opening Your Safe with the Keypad

① Enter the factory pre-set code 1-2-3-4-5 followed by the * key.
2 After properly entering the entire sequence, the green light will turn on and the locking latch will open and spring forward.
3 Lift the safe lid.

NOTE: If an incorrect code is entered 3 TIMES in a row, the lock will automatically shut down for 4 MINUTES before it can be opened again using the correct code. During this delay, the key can be used to open the safe. If an incorrect code is entered, the red light will blink one time and you will hear 3 fast beeps.

Opening Your Safe with the Key

① Insert the key into the lock and then turn counterclockwise (to the left).
② The locking latch will open and spring forward.
3 Press and turn the key clockwise (to the right) to remove.
- Lift the lid to open the safe.

Closing Your Safe

① Close the lid, making sure that the contents do not obstruct the seal. Place the keys in a secure place away from the safe.
2 Push the latch back and down onto the lid clasp and snap the latch into the closed position.
3 Your safe is now locked.

PROGRAMMING A PERSONAL PASSCODE

For security reasons, it is very important that you program your own personal passcode into the digital lock. The factory code should be changed immediately.

To program your own unique four to eight (4-8) digit passcode, follow these steps:

1 Open the safe using the key or the five (5) digit passcode followed by the * key.
2 Lift the lid and locate the reset button cover.
3 Using a small Phillips screwdriver, remove the two screws and cover.
4 Press the black reset button. The LED will flash yellow.
5 Enter your new 4-8 digit passcode followed by the * key.
6 Reenter the new passcode again and press the * key.
If both entries match, the green LED will light up for 2 seconds indicating that your new passcode has been successfully programmed. If both entries do not match, the red LED will light up for 2 seconds and you will have to repeat steps 4-7.
8 Use a Phillips screwdriver to replace the two screws and cover.

Safe Care and Maintenance / Consumer Affairs Safe Identification Record

LOW BATTERY INDICATOR

Every time the keypad is activated, the system automatically checks the power level remaining in the batteries. If the power falls below a certain level, the keypad will beep and flash yellow when a key is pressed.

SAFE CARE AND MAINTENANCE

When properly maintained, your safe will continue to operate accurately for many years. In order to ensure optimum performance of your safe, please follow these simple precautions:

Battery Maintenance

Always purchase and use the batteries as specified by this User's manual.
2 Always replace all batteries at the same time. It is recommended to replace all batteries at least once a year or sooner depending on amount of use.
3 Always clean the battery contacts in the battery compartment and on the batteries before installing new batteries.
4 Always make sure all batteries match the polarity (+ and -) signs in the open battery compartment.
5 If your safe will not be used for an extended period of time, it is recommended that you remove the batteries.
6 Always promptly remove and properly discard of all used batteries.

Clean Hands - Never attempt to operate the digital keypad if your hands have excessive dirt, debris or liquids on them.

Clean Safe – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g., window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use abrasive cleansers on the safe or digital keypad.

CONSUMER AFFAIRS

YOUR SAFE'S UNIQUE IDENTIFICATION NUMBERS

When contacting Consumer Affairs, you should be prepared to supply some important information that specifically identifies your safe. This information is extremely important to assuring prompt and accurate assistance.

It is strongly recommended that you identify and record the following information in the Safe Identification Record form located on page 6:

MODEL NUMBER K

MODEL NUMBER

The First Alert® Safes product line consists of many different models, each identified by a specific Model number. Every model is manufactured with unique capabilities and features that may require specific solutions to a variety of difficulties that occasionally occur.

KEY NUMBER

The Key Number is necessary to identify the specific configuration of the key and lock cylinder components of your safe. If a key becomes damaged or misplaced, the Key Number is required in order for you to receive a replacement key.

LOCATING KEY NUMBER

The Key Number is engraved on the keys and around the lock cylinder.

HOW TO OBTAIN WARRANTY SERVICE

If service is required, do not return the product to your retailer. In order to obtain warranty service, contact Consumer Affairs at 1-800-323-9005, 7:30 a.m. – 5 p.m. Central Standard Time, Monday through Friday. To assist us in serving you, please have the model number and date of purchase available when calling.

IMPORTANT: DO NOT RETURN SAFE TO STORE

If you have any questions pertaining to proper use,

DO NOT RETURN safe to the store.

Please contact Consumer Affairs at 1-800-323-9005.

SAFE IDENTIFICATION RECORD

Model Number

Key Number

Digital Passcode Record

Ordering Replacement Entry Keys Limited Warranty

PLEASE CALL US AT 1-800-323-9005 TO ESTABLISH A WARRANTY RETURN SET-UP

Please return item(s) with Customer Reference number marked on the outside of the box to the address listed below:

First Alert, Inc. Attn: Warranty Safe Returns 1301 Joe Battle El Paso, TX 79936

ORDERING REPLACEMENT ENTRY KEYS

If you lose the safe keys or would like additional keys, you can purchase them from First Alert, Inc. You must supply the following information to assure accurate processing:

① Name / Address / Telephone Number
2 Safe Model Number / Serial Number
4 Indicate number of keys requested
5 Method for how you would like to receive keys

3 Key Number (located on the key and on the Key lock)

Please send all the information via fax at 630-851-7995 or mail First Alert, Inc., 3901 Liberty Street Road, Aurora, IL 60504-8122.

Checks or money orders are required for orders received by mail and should be made payable to First Alert. Contact Consumer Affairs for costing information prior to ordering.

Mail To:

First Alert, Inc. Attn: Consumer Affairs 3901 Liberty Street Road Aurora, IL 60504-8122

LIMITED WARRANTY

LIFETIME AFTER FIRE REPLACEMENT GUARANTEE

If your First Alert ^19 Fire Safe is ever damaged by a fire, BRK will replace it with a comparable model at no charge to the consumer. Freight on the replacement unit is not included in the guarantee and must be paid by the consumer. For claims, submit your name and address, a photo of the damaged safe along with its Model Number, and a copy of the Fire Department report to BRK Consumer Affairs as proof of loss. Once the information is received, Consumer Affairs will contact you with further instructions.

LIMITED WARRANTY

BRK Brands, Inc., ("BRK") warrants that for a period of five (5) years from the date of purchase, this product will be free from defects in material and workmanship. BRK, at its sole option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement or repair will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty.

This warranty is only valid for the original retail purchaser from the date of initial retail purchase and is not transferable. You must keep the original sales receipt. Proof of purchase is required to obtain warranty performance. BRK dealers, service centers, or retail stores selling this product do not have the right to alter, modify or in any way change the terms and conditions of this warranty.

This warranty does not apply to the finish on the product. This warranty does not cover normal wear and tear of parts or damage resulting from any of the following: negligent use or misuse of the product, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than BRK or an authorized service center, improper installation, or exposure to extremes of heat or humidity. Further, the warranty does not cover Acts of God, including natural disasters.

BRK shall not be liable for any incidental or consequential damages caused by the breach of any express or implied warranty. BRK is also not responsible for: costs associated with removing or installing the product; damage or loss of the contents of the product; nor for the unauthorized removal of the contents; or damages incurred during shipment.

Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose is limited in duration to the duration of the above Warranty Period. Some states, provinces or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state, or province to province, or jurisdiction to jurisdiction.

If you have any questions that cannot be answered by reading this manual, please call Consumer Affairs at 1-800-323-9005.

© 2016 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc. First Alert* is registered trademark of The First Alert Trust. 3901 Liberty Street Road, Aurora, IL 60504-8122

For more information and updates, please visit www.firstalert.com