K-19 - Alarm Clock Infiniton - Free user manual and instructions
Find the device manual for free K-19 Infiniton in PDF.
| Product Type | Alarm Clock Radio |
| Brand | Infiniton |
| Model | K-19 |
| Bluetooth Version | 4.2 (supports HSP, HFP, A2DP, AVRCP) |
| Bluetooth Pairing Name | INFINITON K-19 |
| Audio Sources | Bluetooth, TF Card, AUX, FM Radio |
| Alarm Tones | 5 options: 3 built-in melodies, TF card music, FM radio |
| Snooze Duration | 5 minutes |
| Auto Shut-off (Alarm) | After 3 cycles of 2 minutes ring + 5 minutes snooze |
| Power Supply | 5V DC via USB or rated adapter |
| Battery Type | Rechargeable (internal) |
| Charging Indicator | Red LED when charging, off when full |
| Low Battery Warning | Audible prompt at <3.3V, auto shut-off after 6 prompts |
| Dimensions (approx.) | 150 x 80 x 80 mm |
| Weight (approx.) | 300 g |
| Display | LED time display with icons |
Frequently Asked Questions - K-19 Infiniton
User questions about K-19 Infiniton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Alarm Clock in PDF format for free! Find your manual K-19 - Infiniton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. K-19 by Infiniton.
USER MANUAL K-19 Infiniton
Bluetooth version 4.2. support HSP, HFP, A2DP, AVRCP.
Bluetooth pairing name is INFINITON K-19, Rotate the volume knob to turn on the machine, the time and clock icon light on, with notification sound. Contrarotate the volume knob to turn off.
After turning on, speaker will entre to Bluetooth mode automatically. Bluetooth indicator light flash quickly. Use your phone to sourcing
Name INFINITON K-19, then connect and paired. After connected, the Bluetooth icon will light on and with notification sound.
When play music by Bluetooth mode, the Bluetooth icon light on.
It can connect to the latest phone automatically.
TF Mode
While inserting in TF card, the speaker will enter into the TF mode automatically
Also could press to switch to the TF mode (make sure that TF card in the speaker while switching, otherwise invalid).
TF icon will flash slowly while playing music in TF mode.
Pull out the TF card, the speaker will automatically switch to the bluetooth mode.
AUX Mode
The speaker will enter into the AUX mode automatically while inserting in AUX cable. Long press co▶//switch to the AUX mode too(make sure that AUX cable in the speaker while switching, otherwise invalid).
FM Mode
In bluetooth mode, insert AUX cable as antenna and then long press button to enter into FM mode.
In FM mode, short press button for searching radio stations, and the FM icon will be flash while searching stations. After finishing searching, short press button to switch to different station as you like.
Current time and alarm clock setting
Time setting: Long press ▶ button to enter the setting alarm mode, long press button hour number will flash, short press and t▶adjust the hour, then short press to co rm hour, then minutes number will flash, short press and to adjust the minutes. Long press to finish √ting. Short press turn to set time again
Alarm setting: After setting time, short press enter the setting alarm mode, long press ho number will flash, short press and to adjust the hour, then press to con in hour. Same way to set the minutes, after alarm setting, short press to chooseing, there are 5 sounds for option alarm music, number 1-3 are built-in different music, fourth is TF music, fifth is FM. Choosing off means to close alarm clock.
When the alarm ring, Press any button enter snooze mode. alarm will keep ring after 5 minutes later. Long press to turn off snooze function. The alarm will ring 2 minutes, without any operation 5 minutes later alarm will ring again. Repeat 3 times, the alarm ring will turn off automatically. The alarm ring will cycle work everyday, if you do not need, just choose the sounds option to off.
Long press ⏻ to finish alarm setting. Short press ⏻ can back to setting time mode. When setting, no any operation in 15S, setting system will exit automatically without save.
Charging
Connecting the adapter rated 5V or USB port of computer for charging. The indicator will be red while charging, and will be off after charging fully.
LowBatteryPrompt
The speaker will make a prompt when power supply is lower than 3.3V. After 6 times prompt, the speaker will turn off automatically.