HWD8040BW1 - Washing machine HAIER - Free user manual and instructions
Find the device manual for free HWD8040BW1 HAIER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Washing Machine |
| Brand | Haier |
| Model | HWD8040BW1 |
| Capacity | 8 kg |
| Spin Speed | 1400 rpm |
| Energy Class | A+++ |
| Dimensions (H x W x D) | 850 x 600 x 550 mm |
| Net Weight | 72 kg |
| Power Supply | 220-240 V / 50 Hz |
| Water Connection | Cold water only |
| Programs | Cotton, Synthetics, Delicates, Quick 15, Wool, Hand Wash, Drum Clean, Spin & Drain, Rinse & Spin |
| Key Functions | Delay Start, Child Lock, Half Load Detection, Add Garment, Speed Adjust |
| Noise Level (Wash/Spin) | 56 dB / 76 dB |
| Safety Features | Child Lock, Overflow Protection, Unbalance Control, Anti-foam System |
| Maintenance | Clean detergent drawer regularly; run Drum Clean cycle monthly; check and clean pump filter every 3 months |
| Reparability | Spare parts available for 10 years after purchase; replaceable door seal, belt, pump, and heating element |
| Warranty | 2 years parts and labor |
| Included Accessories | Inlet hose, drain hose, user manual, transit bolts |
Frequently Asked Questions - HWD8040BW1 HAIER
How do I start a washing cycle?
Load the machine, add detergent, close the door, select a program using the dial, press Start/Pause button.
What does the Child Lock do?
Child Lock prevents accidental button presses. Activate by holding the Child Lock button for 3 seconds; deactivate similarly.
How to clean the detergent drawer?
Remove the drawer by pulling it out and pressing the release clip. Wash with warm water, dry, and reinsert.
Why is the machine not spinning?
Check for unbalanced load or clogged pump filter. Also ensure the drain hose is not kinked and the spin speed is selected.
How to clean the pump filter?
Unplug the machine, open the lower cover, place a tray, unscrew the filter counterclockwise, clean, and reassemble. Do this every 3 months.
What does error code E2 mean?
E2 indicates a water drainage problem. Check the drain hose and filter for blockages. If persists, contact service.
Can I wash curtains in this machine?
Yes, but use the Delicates or Hand Wash program with a low spin speed and place curtains in a laundry bag.
How to use the Delay Start function?
Select the program, press Delay Start, set the desired delay (e.g., 3-24 hours), then press Start/Pause. The machine will start after the delay.
What detergent should I use?
Use HE (High Efficiency) detergent for front-load washers. Avoid excessive suds. For wool, use specific wool detergent.
How to remove transit bolts?
Remove the rear panel using a screwdriver. Unscrew the four transit bolts (holding the drum) and pull them out to loosen the tubular parts. Keep bolts for future moves.
User questions about HWD8040BW1 HAIER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual HWD8040BW1 - HAIER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HWD8040BW1 by HAIER.