LS-K2464HL - Air-conditioner LG - Free user manual and instructions
Find the device manual for free LS-K2464HL LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Split air conditioner |
| Cooling capacity | 24,000 BTU/h |
| Heating capacity | 24,000 BTU/h |
| Indoor unit dimensions (W x H x D) | 37.0 x 11.5 x 8.0 inches |
| Outdoor unit dimensions (W x H x D) | 35.0 x 25.0 x 20.0 inches |
| Indoor unit weight | 30 lbs |
| Outdoor unit weight | 100 lbs |
| Power supply | 208-230V, 60Hz |
| Compressor type | Inverter |
| Refrigerant | R32 |
| Energy efficiency ratio (EER) | 12.5 |
| Seasonal energy efficiency ratio (SEER) | 16.0 |
| Air flow settings | 4 speeds + auto |
| Remote control | Yes |
| Timer function | Yes, 24-hour on/off |
| Sleep mode | Yes |
| Auto restart | Yes |
| Filter type | Washable, anti-bacterial |
| Filter cleaning indicator | Yes |
| Noise level indoor (low/high) | 32 / 48 dB |
| Noise level outdoor | 55 dB |
| Maintenance | Clean filter every 2 weeks; professional service annually |
| Safety features | Overload protection, auto shut-off, child lock |
| Repairability index | 8.5 / 10 |
Frequently Asked Questions - LS-K2464HL LG
How do I clean the air filter?
Turn off the unit and disconnect power. Open the front panel, remove the filter, and wash it with warm water and mild detergent. Let it dry completely before reinstalling. Clean every two weeks for optimal performance.
How do I set the timer?
Press the Timer button on the remote. Use the + or - buttons to set the desired time for the unit to turn on or off. Confirm by pressing Set. The timer indicator will appear on the display.
What do error codes like 'CH' or '66' mean?
Error codes indicate specific issues. For example, CH often means a communication error between indoor and outdoor units. 66 may indicate a refrigerant leak. Refer to the manual's troubleshooting section or contact LG support.
Can I use an extension cord?
No. The air conditioner must be plugged directly into a dedicated outlet with the specified voltage (208-230V). Using an extension cord can cause overheating and fire hazard.
How do I switch from cooling to heating?
Press the Mode button repeatedly until the desired mode (Cool, Heat, Fan, Dry, Auto) is selected. The mode icon will appear on the display. Note: Heating only works if the unit is a heat pump model.
Why is my unit not cooling enough?
Check if the filter is dirty, the thermostat is set correctly, doors/windows are closed, and the outdoor unit is not blocked. If the problem persists, the refrigerant level may be low – contact a professional.
What is the sleep mode feature?
Sleep mode gradually adjusts the temperature to provide comfort while saving energy. The fan speed may also decrease. It helps reduce noise and prevent waking up due to temperature changes.
How often should I service the unit?
Clean the filter every two weeks. For professional maintenance (coil cleaning, refrigerant check, electrical inspection), have it serviced at least once a year.
Can I install the unit myself?
Split air conditioners require professional installation to ensure proper refrigerant handling, electrical connections, and drainage. DIY installation may void warranty and cause safety issues.
How do I reset the filter cleaning indicator?
After cleaning and reinstalling the filter, press and hold the Filter Reset button (often on the remote or unit) for 3 seconds until the indicator disappears. Refer to the manual for exact steps.
User questions about LS-K2464HL LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual LS-K2464HL - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LS-K2464HL by LG.