ADP 2315 - Dishwasher WHIRLPOOL - Free user manual and instructions
Find the device manual for free ADP 2315 WHIRLPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Whirlpool |
| Model | ADP 2315 |
| Energy Class | A+ |
| Place Settings | 13 |
| Width | 60 cm |
| Depth | 60 cm |
| Height | 85 cm |
| Weight | 40 kg |
| Power Supply | 220-240 V, 50 Hz |
| Water Connection | Cold water, 3/4 inch |
| Noise Level | 47 dB(A) |
| Programs | Eco, Intensive, Normal, Quick, Soak |
| Drying System | Condensation drying |
| Water Consumption per Cycle | 9.5 L (Eco program) |
| Energy Consumption per Cycle | 0.95 kWh (Eco program) |
| Delay Start | Yes, up to 24 hours |
| Salt Indicator | Yes |
| Rinse Aid Indicator | Yes |
| Child Lock | Yes |
| Maintenance | Clean filters regularly; clean spray arms; descale monthly |
| Spare Parts Availability | Filters, spray arms, racks, door seals available online |
| Repairability Index | 7/10 (modular design) |
Frequently Asked Questions - ADP 2315 WHIRLPOOL
How do I start a washing cycle on my Whirlpool ADP 2315 dishwasher?
Load the dishes, add detergent, select a program using the program selector knob, and press the Start button. The dishwasher will begin after a few seconds.
What do I do if the dishwasher does not start?
Check that the door is properly closed and latched. Ensure the water supply is open and the power cord is plugged in. Also check that the child lock is not activated.
How do I clean the filters?
Turn off the dishwasher and remove the lower rack. Twist and lift the filter assembly. Rinse under running water to remove debris. Reinstall securely.
Why is the dishwasher not drying dishes properly?
Ensure rinse aid is filled and the setting is appropriate. Use a program with drying phase (e.g., Eco or Intensive). Avoid overloading and open the door slightly after cycle for steam to escape.
How do I add salt?
Open the salt reservoir cap (usually at the bottom of the tub). Fill with dishwasher salt until the water overflows. Replace cap and run a rinse cycle to remove excess.
What does the error code E1 mean?
Error code E1 indicates a water supply issue. Check that the water tap is fully open and the inlet hose is not kinked. If persists, clean the inlet filter.
Can I wash pots and pans in this dishwasher?
Yes, the Intensive program is suitable for heavily soiled pots and pans. Place them face down with a slight tilt to allow water to reach all surfaces.
How do I adjust the rinse aid dosage?
Open the rinse aid dispenser cap and adjust the dial (usually from 1 to 6). A higher setting increases the amount of rinse aid released per cycle.
What is the energy consumption of the Eco program?
The Eco program consumes approximately 0.95 kWh per cycle, making it the most energy-efficient option for normally soiled dishes.
How do I replace a broken spray arm?
Unscrew or unclip the faulty spray arm (upper or lower). Order a replacement arm from Whirlpool spare parts. Install the new arm and ensure it rotates freely.
User questions about ADP 2315 WHIRLPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual ADP 2315 - WHIRLPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADP 2315 by WHIRLPOOL.