USER MANUAL ST SEB602F STOVES
Countries of destination:
GB - Great Britain ☑
IE - Ireland ☑
DE - Germany
ES - Spain
FR - France
IT - Italy
PL - Poland
NL - Netherlands
SE - Sweden
CN - China
NZ - New Zealand
AU - Australia
To contact Stoves about your appliance, please call:

Customer Care Helpline
0344 815 3740
In case of difficulty within the UK

Warranty Registration
0800 952 1065
*Please call our Customer Care team for extended warranty

Spares Store
0344 815 3745

To register your appliance online:
www.stoves.co.uk

To contact us by email:
gdhainfo@gdha.com

To register your appliance by mail:
Please complete the warranty card and return to the address supplied

Alternatively general, spares and service information is available from
our website at: www.stoves.co.uk
Calls are charged at the basic rate. Please check with your telephone service provider for exact charges.
Your new appliance comes with our 12-month guarantee, protecting you against electrical and mechanical breakdown. To register, please complete the registration form included, register online or by phone. For full terms & conditions of the manufacturer's guarantee, please refer to the website above. In addition, you may wish to purchase an extended warranty. A leaflet explaining how to do this is included with your appliance.
Our policy is one of constant development and improvement, therefore we cannot guarantee the strict accuracy of all of our illustrations and specifications. Changes may have been made subsequent to publishing.
ACKNOWLEDGMENT
Thank you for purchasing our product. We hope you enjoy using the many features and benefits it provides.
This user guide book is designed to help you through each step of owning your new product.
Please read it carefully before you start using your appliance, as we have endeavored to answer as many questions as possible, and provide you with as much support as we can.
General information, spares and service information is available from our website.
Ensure that other people using the product are familiar with these instructions as well.
If you should find something missing from your product or have any questions that are not covered in this user guide, please contact us (see contact information inside the front cover).
European Directives

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product
may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
This appliance conforms to European Directive regarding Eco design requirements for energy-related products.
DECLARATION OF COMPLIANCE
When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any doubts at all, do not use it: contact a professionally qualified person. Keep packing materials such as plastic bags, polystyrene, or nails out of the reach of children because these are dangerous to children.

If you smell gas, do not try to light any appliance. Do not touch any electrical switch.
Call the Gas Emergency Help line at 0800 111999
WARNING
- During use the appliance becomes hot. Care should be taken to avoid touching heating elements.
- Children less than 8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.
- Do not use a steam cleaner on any range cooker, hobs and oven appliances.
- Ensure that the appliance is switched off before replacing the lamp to avoid electric shock.
- Never put items directly on the base of the oven or cover the oven base with foil, as this can cause the base element to overheat.
- When the oven is first switched on, it may give off an unpleasant smell. Please use the conventional or fanned cooking function at 250°C for 90 minutes to clean oil impurities inside the cavity. Ensure that the room is well ventilated during this process.
- Do not allow children to go near the oven when it is operating, especially when the grill is on.
- The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring specifications.
- An all-pole disconnection means must be incorporated in the fixed wiring in accordance with the wiring rules in force.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This appliance must be fitted to a switch providing all pole
disconnection with a minimum contact separation of 3mm.
- Connection should be made with a suitable flexible cable with a minimum temperature rating of 70°C.
- Although every care has been taken to ensure this appliance has no sharp edges. We recommend that you wear protective gloves when installing and moving this appliance. This will prevent injury.
- Always switch off your appliance and allow it to cool down before you clean any part of it.
CAUTION
- This appliance must not be installed behind a decorative door in order to avoid overheating.
- The cooking process has to be supervised. A short term cooking process has to be supervised continuously.
- Ensure shelving is correctly installed, see the sections on shelf runners and shelf location within this book
- Fire Safety Advice
If you do have a fire in the kitchen, don't take any risks - get everyone out of your home and call the Fire Brigade.
If you have an electrical fire in the kitchen:
- Pull the plug out, or switch off the power at the fuse box - this may be enough to stop the fire immediately
- Smother the fire with a fire blanket, or use a dry powder or carbon dioxide extinguisher
- Remember: never use water on an electrical or cooking oil fire.
• Other Safety Advice
- Servicing should be carried out only by authorised personnel.
- Do not operate the appliance without the glass panel correctly fitted.
- There is a risk of electric shock, so always make sure you have turned off and unplugged your appliance before starting. Always allow the product to cool down before you change a bulb.
- Do not modify the outer panels of this appliance in any way.
• This appliance must be earthed.
- The appliance must never be disconnected from the mains supply during use, as this will seriously affect the safety and performance, particularly in relation to surface temperatures becoming hot and gas operated parts not working efficiently. The cooling fan (if fitted) is designed to run on after the control knob has been switched off.
- GAS WARNING! - If you smell gas: Do not try to light any appliance, Do not touch any electrical switch. Contact your local gas supplier immediately.
Getting to know your product
Note: Your appliance layout may differ depending on the model.
Control Panel![graph LR A["Function Selector Control (K1)"] --> B["F"] B --> C["Clock Button"] C --> D["Start/Confirmation Button Minute (K2)"] D --> E["Pause/Off Button"] E --> F["Time/Temperature Minder (K2)"]](/content/2026/05/928073/images/16a1cfcecfea130a6efe5ae32c877d02c49d761acb3997136857e14f27c7de66.jpg)
Oven / Grill functions
Note: Your oven may not have all of the functions shown here. We recommend for best cooking results, please preheat for 15 minutes.
| Symbol Function Description |
 | Fanned Oven:- The even temperature in the oven makes this function suitable for batch baking, or batch cooking foods. The temperature can be set within the range of 50-240°C. The default temperature is 180°C. |
 | Top Heat:- This function is ideal for browning off the tops of food as it is not as intense as the grilling function, Provides additional browning for dishes like lasagna or cauliflower cheese, Use this function towards the end of the cooking cycle. The temperature can be set within the range of 150-200°C. The default temperature is 180°C. |
 | Fanned Grill:- The fan forces air around the food and is ideal for thinner foods such as bacon, fish and gammon steaks. Foods require less turning. Use this function with the oven door closed. The temperature can be set within the range of 150-240°C. The default temperature is 210°C. |
 | Radiant Grill:- The centre area under the grill becomes hot and is ideal for toasting, and grilling meats such as sausages, chops and steaks The temperature can be set within the range of 150-240°C. The default temperature is 210°C. |
 | Defrost:- Can be used to gently defrost frozen foods, This setting can also be used to help dough to rise faster than at room temperature. |
 | Slow Cook:- Provides a gentle heat suitable for slow cooking or keeping food warm. Temperature can be set within the range of 80-120°C. The default temperature is 100°C. |
 | Dough Proving:- This function circulates air at the correct temperature for proving bread dough for up to 40°C. |
 | Oven Lamp:- Can be operated on its own and will also come on when any oven function is selected. except ECO function. |
 | The even temperature in the oven makes this function suitable for batch baking, or batch cooking foods. The temperature can be set within the range of 50°C to 250°C. |
Oven


Cooling Fan
When cooking is finished, paused, or if the center oven temperature is over 75°C, the cooling fan will continue working for 15 minutes. When the center oven temperature drops below 75°C, the cooling fan will stop.
To use your appliance
To select a Cooking Function and Cooking Temperature
- Begin by turning K1 to the desired cooking function. The selected function will be shown on the appliance display.
- Rotate K2 to select the desired cooking temperature. This can be adjusted during use. Note that some functions (light only, Defrost, etc.) will not have a temperature option.
- Press the Start/Confirmation button to set the function and temperature.
Note: Press the Pause/Off button once to pause cooking. Press the Pause/Off button twice to cancel cooking.
To activate and deactivate the Child Lock function
Child lock can be activated to stop the product from being accidentally turned on.
- Press and hold the Start/Confirmation and the Pause/Off buttons until a beep is heard. A lock symbol will appear on the display. This indicates that the Child Lock function has been activated.
- To deactivate, press and hold the Start/Confirmation and the Pause/Off buttons until a beep is heard. The lock symbol will disappear on the display and the appliance can be used as normal.
Clock/Programmer
Setting the Time of Day
This can be done when the appliance is first connected to the power supply or at any point afterwards providing the oven is in standby (i.e., not operating).
The clock is displayed as "hh:mm" and is a 24 hour clock.
- Press the Clock Button once, and the hour figures will begin to flash.
- Rotate K2 to adjust the hour figure. The numbers go from 0-23.
- Press the clock button to set the hours and move onto the minutes.
- Rotate K2 to adjust the minutes figure. The minutes go from 00-59.
- Press the clock button to finish setting the clock. The ":" will begin to flash. This signals that setting the Time of Day has been successful.
Note: If the clock is not set when first connected to the power, it will display 00:00.
Setting the Minute minder
This cannot be set when cooking functions are being selected.
The clock is displayed as "h:mm".
- Press the Minute Minder button. The display should show "0:00" and the Minute Minder light will be lit on the display.
- Rotate K2 to adjust the hour figure. The numbers go from 0-9.
- Press the Minute Minder button to set the hours and move onto the minutes.
- Rotate K2 to adjust the minutes figure. The minutes go from 00-59.
- Press the Start/Confirmation button to finish setting the minute minder. The Minute Minder will then begin to count down.
- When the Minute Minder has finished counting down the appliance will beep 10 times. This signals the end of the minute minder.
Note: The Minute Minder can be cancelled during set-up by pressing the Pause/Off button. The Minute Minder can be cancelled at any point once it has been set by pressing the Pause/Off button twice. Resetting the minute minder allows the user to amend the desired time.
Semi-Automatic Cooking (To Use Your Appliance)
- Begin by turning K1 to the desired cooking function. The selected function will be shown on the appliance display.
- Adjust K2 to change the cooking temperature. Note that some functions (light only, Defrost, etc.) will not have a temperature option.
- Press the Start/Confirmation button to set the function and temperature.
- Adjust K1 to set the cooking time (if not adjusted, the default cooking time is set to 9 hours).
- Press the Start/Confirmation button to confirm cooking time.
- To change cooking temperature or cooking time, simply adjust the relevant knob to the desired setting and press the Start/Confirmation button to confirm your choice.
- When cooking has finished, the appliance will beep 5 times.
Note: Press the Pause/Off button once to pause cooking. Press the Pause/Off button twice to cancel cooking.
Fully Automatic Cooking (To Use Your Appliance)
- Press the Clock Button once, and the hour figures will begin to flash.
- Rotate K2 to adjust the hour figure. The numbers go from 0-23.
- Press the clock button to set the hours and move onto the minutes.
- Rotate K2 to adjust the minutes figure. The minutes go from 00-59.
- Now adjust K1 to select the desired function.
- Press the Start/Confirmation button to set the function.
- Adjust K1 and K2 in order to set the cooking time and cooking temperature.
- Press Start/Confirmation button to confirm cooking time and cooking temperature. The Fully Automatic symbol will appear on the display, which looks like a sand timer. The Oven is now set to Fully Automatic, and will begin cooking at the time set.
- A beep will sound when the oven begins its cook cycle. The Fully Automatic symbol will disappear. The oven will now have the same functionality and operations as Semi-Automatic cooking.
- When cooking has finished the appliance will beep 5 times.
Note: Press the Pause/Off button once to pause cooking. Press the Pause/Off button twice to cancel cooking. Lamp and Defrost functions cannot be set in Fully Automatic mode.
Notes
- The Oven lamp will be on for all functions (except ECO function)
- Energy saving mode is activated automatically when the oven has not been operating for 10 minutes. The display will go off. To manually enter Energy Saving mode, press and hold the Start/Confirmation button for 3 seconds.
Soft Closing Door (If fitted)
The door can be paused at any angle greater than 30 degrees.
The door will close slowly under the action of the damper, if it is less than or equal to an angle of 30 degrees.
Please do not close the door vigorously.

Catalytic Oven liners (If fitted)
Some oven specifications have catalytic oven liners fitted to the sides of the oven. You can easily tell if they are fitted because the panel is a light grey soft touch enamel. This enamel is special and partly cleans itself. This does not stop all marks on the lining, but helps to reduce the amount of manual cleaning needed.
These panels work best when the oven is heated above 200 degrees Celsius. If you do most of your cooking below this temperature, occasionally wipe the panels with a lint free cloth and hot soapy water. The panels should then be allowed to dry naturally and the oven heated at 200 degrees Celsius for about one hour. This will make sure that the panels are working effectively.
Do not use harsh abrasives or chemicals on this soft enamel.
Removing the door from oven (optional)
- To remove the door, open the door to the maximum angle. Then pull the catch at the door hinge backward.
- Close the door to an angle approximately 30 degrees. Hold the door with one hand on each side. Lift up and slowly pull the door out from the oven.
- Open the door rotation bracket assembly, refer the action in the following picture.
- Lift up the door outer glass and pull it out, then take the door middle glass out in the same way.

To reassemble, follow the instructions in reverse, ensuring the glass is re-installed the right way up.
WARNING: Do not forcibly pull on the oven door as this could result in the glass shattering during the dismantling process.
WARNING: The hinge springs could loosen, causing personal injury.
WARNING: Do not lift or carry the oven door by the door handle.

Accessories
Wire shelf: For grill, dishes, cake pan with items for roasting and grilling.

Slider bracket: For cooking larger size food, these shelf support rails on the right and left sides of the oven can be removed.

Grill pan: For cooking large quantities of food such as moist cakes, pastries, frozen food etc, or for collecting fat/ spillage and meat juices.

Telescopic runner (if fitted): Some models might come with telescopic runners to facilitate the use of oven. These telescopic runners and slider brackets could be disassembled by unscrewing the screws used to fix it.

Shelf placement warning:
To ensure the oven shelves operate safely, correct placement of the shelves between the side rail is imperative. Shelves and the grill pan can only be used between the first and fifth layers.
The shelves should only be used in the right direction as it ensures that trays and hot food items do not slide if the shelves are moved.

Removing Shelf Runners


Standard shelves
The oven shelves can also be hooked onto the shelf runners.

Before removing the shelves completely, make sure that the shelf is unclipped from the retaining tabs.
BULB REPLACEMENT
Risk of electric shock!
Glass cover
You must replace a damaged glass cover. Suitable glass covers may be obtained from the after-sales service.
For replacement, proceed as follows:
- Disconnect power from the mains outlet or switch off the circuit breaker of the unit's mains outlet.
- Unscrew the glass lamp cover by turning it counter-clockwise (note, it may be stiff) and replace the bulb with a new one of the same type.
- Screw the glass lamp cover back in place.
Note: Only use 25-40W/220V-240V, T300°C halogen lamps.

Do's
Note: Always switch off your appliance and allow it to cool down before you clean any part of it.
Note: Please take extra care when cleaning over the symbols on the control panel, as this can lead to them fading.

- Warm, soapy water • Wipe with damp cloth, wring out cloth


Tips: Some foods can mark or damage the metal or paint work e.g.; Vinegar, fruit juices and salt. Always clean food spillages as soon as possible.
Don'ts

- Undiluted bleaches
- Chloride products

- Wire Wool
- Abrasive cleaners
- Nylon pads
- Steam cleaners

Do not place in the dishwasher: - Cast iron griddle - Pan supports
IT IS IMPORTANT TO CLEAN YOUR APPLIANCE REGULARLY AS A BUILD UP OF FAT CAN AFFECT ITS PERFORMANCE OR DAMAGE IT AND MAY INVALIDATE YOUR GUARANTEE.
IN ADDITION TO THE ABOVE, DO NOT USE METAL SCRAPERS TO CLEAN THE OVEN DOOR GLASS.
We offer a great range of cleaning products and accessories for your appliance.
To shop, please visit our website located at the front of this User Guide.
Please keep this handbook for future reference, or for anyone else who may use the appliance.
Electric Built In
| Electrical supply / Load |
| Appliance Size (cm) Electrical $upply Load (kW) | | |
| 60 Fanned Oven 220 - 240V ~ 50Hz 2.1 | | |
For the specific power rating of your model, refer to the data badge on the front frame of your appliance.
WARNING: This appliance must be earthed.