Slam XL - Docking Station KitSound - Free user manual and instructions
Find the device manual for free Slam XL KitSound in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Docking Station |
| Brand | KitSound |
| Model | Slam XL |
| Dimensions (W x H x D) | 30 x 12 x 10 cm |
| Weight | 1.2 kg |
| Power Supply | AC 100-240V ~ 50/60Hz, DC output 12V 2A |
| Bluetooth | Yes, version 5.0, range up to 10m |
| AUX Input | 3.5mm stereo jack |
| USB Charging Port | 5V 2.1A output |
| FM Radio | Yes, with built-in antenna |
| Controls | Buttons for power, volume, play/pause, track skip, and source selection |
| Display | LED indicator for power and Bluetooth status |
| Speaker Configuration | 2 x 10W full-range drivers |
| Frequency Response | 20Hz - 20kHz |
| Housing Material | Plastic with metal grille |
| Color | Black |
| Cable Length | 1.5m power cord |
| Clean & Maintenance | Wipe with a soft, dry cloth. Do not use abrasive cleaners or liquids. |
| Safety Warnings | Keep away from water and moisture. Do not disassemble. Use only provided adapter. |
| Spare Parts & Repairability | Contact KitSound support for replacement parts. User-replaceable: none. Professional repair recommended. |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - Slam XL KitSound
How to connect my device via Bluetooth?
Turn on the Slam XL, then press the Bluetooth button to enter pairing mode. On your phone/tablet, enable Bluetooth and select 'Slam XL' from the list. Once paired, audio will stream wirelessly.
Can I charge my phone using the docking station?
Yes, the Slam XL has a USB charging port on the rear panel. Plug your phone's USB cable into that port to charge at 5V 2.1A.
Can I use the docking station without Bluetooth?
Absolutely. Use the AUX input with a 3.5mm audio cable to connect non-Bluetooth devices like MP3 players or older phones.
What should I do if there is no sound?
First, check that the volume is turned up. Ensure the correct source is selected (Bluetooth or AUX). If using Bluetooth, confirm the device is paired and playing. Also, verify the power cable is securely connected.
How do I reset the Slam XL to factory settings?
Press and hold the Power button for 10 seconds until the LED flashes rapidly. This will clear all paired devices and reset settings.
Is the Slam XL waterproof?
No, the Slam XL is not waterproof. Keep it away from liquids and use it in dry indoor environments only.
Does it have an FM radio?
Yes, the Slam XL includes a built-in FM radio. Press the Source button to switch to Radio mode. Extend the power cord to improve reception.
What is the battery life?
The Slam XL does not have an internal battery; it must be plugged into AC power at all times.
How to clean the docking station?
Unplug the unit and wipe the surfaces with a soft, dry cloth. Do not use any chemicals, sprays, or abrasive materials.
What is included in the box?
The package includes the Slam XL docking station, AC power adapter, remote control (battery included), AUX cable, and user manual.
User questions about Slam XL KitSound
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Docking Station in PDF format for free! Find your manual Slam XL - KitSound and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Slam XL by KitSound.