SVVE02420TR - Household Fan SVAN - Free user manual and instructions
Find the device manual for free SVVE02420TR SVAN in PDF.
| Product Type | Pedestal Fan |
| Brand | SVAN |
| Model | SVVE02420TR |
| Voltage | 220-240V AC |
| Speed Settings | 3 (Low, Middle, High) |
| Timer Range | 1 to 8 hours |
| Modes | Normal, Nature, Sleep |
| Oscillation | Yes (SWING button) |
| Negative Ion Function | Yes (press button for 3 seconds) |
| Control Type | Push buttons on control panel |
| Assembly Required | Yes (base and poles) |
| Cleaning Method | Wipe with damp cloth using neutral detergent; do not rinse with water |
| Safety Features | Do not use near water, do not insert objects, use on flat surface, indoor only |
| Power Cord | If damaged, must be replaced by manufacturer or service agent |
| Recommended Use | Indoor domestic use only |
Frequently Asked Questions - SVVE02420TR SVAN
User questions about SVVE02420TR SVAN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Household Fan in PDF format for free! Find your manual SVVE02420TR - SVAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SVVE02420TR by SVAN.
USER MANUAL SVVE02420TR SVAN
Step 1

natural_image
Technical diagram of a mechanical device with labeled body and internal components (no text or symbols beyond label)Step 2

Step 3


PRECAUCIÓN
to start and stop the fan.
SPEED button: .Push the button ☐ to select speed of: Low ☐ - Middle ≈ -High ≈
TIMER button: Push 📊 to select the timers from 1 hours to 8 hours, it will show on the
display panel
MÓDÉ button : Push the button to select mode of
"Normal 😊", "Nature 📋", "Sleep ✦", "Sleep ✦"
SWING button: Push the button to oscillate the fan, push it again to stop the function.
Negative ion function : Push the button for 3 seconds to start function of negative ion
function
All the buttons are on the control panel as below:

natural_image
Close-up of a black appliance front panel with control buttons and a dial (no visible text or symbols)
ASSEMBLING
Step 1 : Aiming the assemble poles with the corresponding holes, and insert the poles into the holes.
Step 2: Aiming the assembled base to screw poles of the fan body
Step 3: After well connect of the body and base, screw into the screw
holes of the base. And put the power cord into the slot of the base.
Step 4: Put the fan flatly

Step 1

Step 2

Step 3
CAUTION
- Use as per the rating voltage.
- Do not repair or remake the appliance by yourself, it should be repaired by the repairment.
- Do not operate the appliance with wet hands, in order to avoid damage.
- If the supply cord is damaged, it must be replaced by a same cord from the manufacturer or its service agents.
- When the appliance is not in use, switch it off and unplug it.
- Do not insert things to air outlets and inlets, in order to avoid damage.
- Do not use the appliance near explosive and combustible gas.
- Use the appliance only on a flat surface.
- Do not use outdoors.
- Do no turnover the appliance. Unplug the power supply If it is toppled over and there have some water in the body. Dry the body before use.
- Clean the appearance with a lightly damp cloth. It can clean with neutral detergents. Do not rinse with water.
- Do not make air outlets and inlets near the wall or curtain.
- Do not knock or shake the body when use, otherwise it may cause stop.
- The appliance must not located immediately below a socket outlet. The rating current of socket should exceed 10A.
- Do not use the appliance in the immediate surrounding of a bath, a show or a swimming pool.
- This appliance is not intended for use by persons including children with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
CLEANING AND MAINTENANCE