PB-6000WC - Power bank Laser - Free user manual and instructions

Product Type	Power Bank
Brand	Laser
Model	PB-6000WC
Battery Capacity	6000 mAh
Input Port	Micro USB (5V/2A)
Output Port	USB-A (5V/2.1A)
Charging Time	Approximately 3-4 hours
LED Indicators	4 LEDs for battery level
Dimensions	98 x 44 x 22 mm
Weight	160 g
Material	Plastic casing
Safety Features	Overcharge, overcurrent, short circuit protection
Operating Temperature	0°C to 45°C
Storage Temperature	-10°C to 60°C
Color	White
Compatibility	Smartphones, tablets, and other USB devices
Maintenance	Clean with a dry cloth; do not immerse in water
Spare Parts Availability	Contact Laser customer service for replacement
Warranty	1 year limited warranty

Frequently Asked Questions - PB-6000WC Laser

How do I charge the Laser PB-6000WC power bank?

Use the included Micro USB cable to connect the power bank to a USB power adapter (5V/2A). The LED indicators will show the charging status. Full charge takes approximately 3-4 hours.

What devices can I charge with this power bank?

You can charge any device that charges via USB, such as smartphones, tablets, Bluetooth headphones, and more. The output is 5V/2.1A, compatible with most devices.

How do I know the battery level of the power bank?

Press the power button to check the battery level. The four LED indicators will light up: 1 LED = 25%, 2 LEDs = 50%, 3 LEDs = 75%, 4 LEDs = 100%.

Can I charge my power bank and a device at the same time?

Yes, the Laser PB-6000WC supports pass-through charging. You can charge the power bank while it is charging your device.

Is the power bank safe to use?

Yes, it includes built-in protection against overcharging, overcurrent, and short circuits. Use only certified cables and adapters.

How should I store the power bank when not in use?

Store in a cool, dry place away from direct sunlight and extreme temperatures. Keep it at around 50% charge for long-term storage.

What does the 'WC' in PB-6000WC stand for?

'WC' likely denotes the white color variant of the model. The specifications remain the same.

How can I clean the power bank?

Use a soft, dry cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Avoid getting moisture in the ports.

My power bank isn't charging my device. What should I do?

First, ensure the power bank has sufficient charge (press the button to check LEDs). Try a different cable or device. If the issue persists, reset the power bank by pressing the button for 10 seconds.

Where can I find the user manual for the PB-6000WC?

The manual is available for free download in PDF format on notice-facile.com. You can also request a translated version via email.

USER MANUAL PB-6000WC Laser

White rectangular electronic device with wireless signal icons on its side, showing ports and connectors (no text or symbols visible)

IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS

• Read all instructions carefully before use.
• Retain manuals for future reference.
• Use this product only in the manner described.
• Only use a water-dampened soft-cloth to clean the surface of this product.
• The following will damage this product: any liquid such as water or moisture, extreme heat; cold; humidity, dusty or sandy environments.
• Only place this device on stable surfaces and ensure that any attached cables are secure and will not cause the device to fall.
• There are no user serviceable parts in this product.
• Un-authorized attempts to dismantle or repair this product will void product warranty
• Using this device near other electronic devices may cause interference.

PACKAGE INCLUDES

Wireless charging pad, Micro USB cable, Quick user guide

BUTTONS AND CONNECTIONS

Name		Description
1	Charging Pad	Indicators on the front panel help to position your device correctly
2	Power indicator	Series of four indicator lamps display the battery charge status. (25%, 50%, 75%, 100%)
3	Power button	Press the power button once your device is connected to begin charging
4	Output 1: 1A	Connected a device to this output for 1 amp output charge
5	USB Charging Input	Charge your power bank by connecting a USB charger to this port
6	Output 2: 2.1A	Connected a device to this output for 2.1 amp output charge

Connect the PB-6000WC to a USB charger (eg. wall charger) using the supplied USB cable. The four indicator lamps display the charging status. Once all four indicators lamps are visible (and not flashing) this indicates a full charge.

CHARGING YOUR PORTABLE DEVICE

VIA USB

To begin charging your portable USB device, simply connect it via a Micro USB cable and press the power button.

The indicator lamps will turn on when charging has begun.

CHARGING YOUR PORTABLE DEVICE

VIA WIRELESS QI

To charge your compatible device such as a smart phone, place it directly on top of the charging pad and press the power button on the power bank.

The indicator lamps will turn on when charging has begun.

Note: Please check with your phone manufacturer to ensure your portable device can support WIRELESS QI charging.

POSITIONING YOUR DEVICE

Placing your device at the centre of the charging pad will ensure the best charging results.

Ensure that your device is centred, over the centre of the charging pad.

HINTS AND TIPS

• Use a high capacity USB charger, such as 2.1Amp, to charger your power bank more quickly.
• If the wireless charging pad is not charging your device properly, ensure all connections are plugged in firmly and that your device is properly placed on the wireless charging pad. (Refer to the above diagram)

Warranty Against Defects

Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with accompanying recommendations or instructions where provided. The benefit of this warranty is in addition to your rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates.

Through a network of retailers and resellers, Laser will provide you with your choice of a repair, exchange (where possible) or refund (within Dead on Arrival period) for this product if it becomes defective within the warranty period.

This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear and tear, neglect or improper storage. Please retain your receipt as proof of purchase

How to make a product warranty claim:

Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be verified, your place of purchase or Laser will make an assessment based on the date of manufacture, the condition of the Laser Product and the type of defect.

Step 2a): Contact your place of purchase. They will assess the nature of the fault and repair, replace or fund the product as per their store refund or warranty policy.

Step 2b): If your place of purchase cannot be contacted, then you can contact Laser. Customer Service with details of your defective Laser Product: Phone: [phone]; or Email: [e-mail] or online www.laserco.com.au/warranty (click on “Consumers (End Users)”). Our business address is at 1/6-8 Byfield Street, North Ryde, NSW 2113

Step 3: Laser will issue you with a Return Authorisation (RA) number within 48 hours. When requested, send us the defective Product and a copy of your receipt. Laser will cover the cost of the return delivery.

Step 4: Wait for us to contact you. Once we have received your defective Laser Product for inspection, we will inform you of our assessment of your claim within 7 days. When we contact you, we will firstly let you know whether you have a valid claim under this Warranty, and if so, we will inform you whether your defective Laser Product will be replaced or repaired, together with the number of days you can expect to wait to receive your replaced or repaired Laser Product.

Step 5: For further details on warranty cover and returns, please check Terms and Conditions for Warranty Returns section on http://www.laserco.com.au/warranty

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.