MLL 147 X - Dishwasher Meireles - Free user manual and instructions

Product Type	Built-in Dishwasher
Brand	Meireles
Model	MLL 147 X
Color	Stainless Steel
Place Settings	14
Energy Class	E
Annual Energy Consumption	295 kWh
Water Consumption per Cycle	9.5 L
Noise Level	46 dB(A)
Dimensions (H x W x D)	81.8 x 59.6 x 57.5 cm
Weight	45 kg
Electrical Connection	220-240 V, 50 Hz, 10 A
Programs	Eco 50°C, Intensive 70°C, Quick 30 min, Glass 40°C, Pre-Wash
Drying System	Condensation Drying
Delay Start	1-24 hours
Child Lock	Yes
Salt and Rinse Aid Indicators	Yes
Cutlery Basket	Third Rack or Removable Basket
Adjustable Upper Rack	Yes, height adjustable
Water Protection System	AquaStop (full leakage protection)
Energy Saving Mode	Yes
Operating Temperature Range	5°C to 45°C
Removable Filter	Yes, self-cleaning
Installation Type	Built-in, panel ready
Serial Number Location	On the right inner side of the door

Frequently Asked Questions - MLL 147 X Meireles

How do I start a wash cycle on the MLL 147 X?

Press the ON/OFF button, select a program using the program selector, and then press START. The dishwasher will begin after a short delay.

What does the 'E' energy class mean for this dishwasher?

Energy class E indicates moderate energy efficiency. It consumes approximately 295 kWh per year, which is average for standard models.

How can I clean the filters of the MLL 147 X?

Turn the coarse filter counterclockwise and remove it. Rinse all filters under running water and reassemble. Clean them regularly to ensure optimal performance.

Is the MLL 147 X suitable for built-in installation?

Yes, this model is designed for built-in installation. It can be integrated under a countertop with a furniture panel attached.

How do I activate the child lock?

Press and hold the Child Lock button (or a combination of buttons) for 3 seconds until the indicator lights up. Refer to the manual for exact steps.

What is the maximum number of place settings?

The MLL 147 X can accommodate up to 14 place settings following the standard loading layout.

Can I use dishwasher tablets?

Yes, you can use multi-functional tablets (all-in-one). Place them in the detergent dispenser or in the pre-wash compartment if needed.

How do I reset the MLL 147 X?

Turn off the dishwasher using the ON/OFF button, wait 10 seconds, and turn it back on. If the issue persists, consult the error codes in the manual.

What does the 'AquaStop' feature do?

AquaStop is a water protection system that prevents flooding by automatically shutting off water if a leak is detected, ensuring safety.

How do I adjust the rinse aid setting?

Open the rinse aid dispenser cap, adjust the dial to a higher number (1-6) for more rinse aid, and close the cap. Higher settings improve drying results.

USER MANUAL MLL 147 X Meireles

Interior view of a kitchen appliance with a white lid and black drawer (no visible text or symbols)

Guiarápido

Illustration of a hand using a tool to press or install a mechanical component (no text or symbols visible)

Close-up of a hand pressing down on a white electronic device with ventilation slots (no visible text or symbols)

Close-up of a kitchen sink with a person in white coat and hat, no visible text or symbols

Close-up of a hand holding a small electronic device with ports and indicator lights (no visible text or symbols)

Illustration of kitchen utensils including a pan, lid, and pot (no text or symbols)

Two technical line drawings of structural beams and supports, no text or symbols present

Filtro principal 1

Interior view of a white appliance with open lid and internal components (no visible text or symbols)

Quick operation guide

Fordetailedoperating methodreadthecorrespondingcontentontheinstructionmanual.

Switch on the appliance

Press the On/Off button to switch on the appliance, Open the door.

Mechanical indicator C.

Electric indicator on control panel (if provided).

Checktherageneration saltlevel

(Onmodelswithwatersoftenersystemonly.)

Electricity control panel (I provided). If there is a light-light threshold signal

(forsomemodels) youcanestimatewhentofillthesaltinto

thesoftenerbythenumberofcyclethedishwasherhasrun.

Loadthebaskets

Scrapeoflanylargeamountofleftoverlood. Softenremnantsofburntfoodinpans,

then load the baskets. Refer to the dishwasher loading instructions.

Selectaprogramme

PresstheProgrammeButtonuntiltheselectedprogrammelightsup.

( See the section entitled "Operation Instruction" )

Runningthedishwasher

Closethedoor turnonthewatertapandoressthe. Themachlern-Rastaw-Bidron

afterabout10seconds.

Read this Manual

DearCustomer,

This appliance is intended to be used in household

and similar applications such as:

-stall kitchen areas in shops, offices and other

working environments;

-farmhouses:

-by clients in hotels, motels and other residential

type environments

-bed and breakfast type environments.

Please carefully read this manual before using the
dishwasher, it will help you outouse and maintain the
dishwasher properly
- Keep it as a refer in the later days.
Passitonto any subsequent owner of the appliance.

This manual contains sections on safety instructions.

Operating Instructions, Installation Instructions and

Troubleshooting Tips, etc.

Before Calling for Service

To review the section on troubleshooting Tips

1) Safety Information....1

2) Disposal....2

3) Operating Instructions....3

ControlPanel....3

Dishwasher Features....3

4) Prior using for the first time....4

A、Water Softener 4
B. Loading the Salt into the Sollener....5
C. Fill the Rinse Aid Dispenser 5
D. Function of Detergent....6

5) Loading the Dishwasher Basket....9

Attention before or after loading the Dishwasher

Baskets....9

The Method Loading Normal Dishware....10

6) Starting a washing programme....11

Wash Cycle Table....11

Turning on the Appliance 12

Change the Programme 12

AttheEneoftheWashCycle....12

7) Maintenance and cleaning....13

Filtering System....13

Device for the Dishwasher

1. IMPORTANT SAFETY INFORMATION READ ALL OF THE INSTRUCTIONS BEFORE USING

WARNING!

When using your dishwasher, follow the precautions listed below:

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce therlskofanelectric shock by providing apathof least resistance of electric current. This appliance is equipped with accordance having an equipment-grounding conductor and underground plug.
■ Theplugmustbepluggedinloanappropriateoutlet thatisinstalledandgroundedinaccordancewith allocalcodesandordinances.

▲WARNING!

■ Improperconnection of the equipment-grounding conductor can result in the risk of an electric shock.
Check with a qualified electrician or service representative if you are indoubt whether the appliance is properly grounded. Donot modify the plug provided with the appliance; If it does not fit the outlet. Have a proper outlet installed by a qualified electrician.

WARNING! PROPER USE

■ Donotabuse, slton, orstandonthedo rackofthedishwasher.
■ Donottouchtheheatingelementduringor immediatelyafteruse. (Thisinstructionisonlyapplicabletomachines withavisualheating element.)
■ Do not operate your dishwasher unless all enclosure panels are properly in place. Open the door very carefully if the dishwasher is operating, there is a risk of watersquirtingout.
■ Do notplaceanyheavyobjects on or stand the door when it is open. The appliance could tip forward.
■ When loading items to be washed: 1) Locate sharp items so that they are not likely

Keep children away from detergent and rinse aid, keep children away from the open door of the dish washer, there could still besomed detergent left inside.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been supervision or instruction concerning use of the appliance by a person responsible for their safety.
■ Children should be supervised to ensure that they do not playwiththeappliance.
■ Dishwasher detergents are strongly alkaline, they can be extremely dangerous if swallowed. Avoid contact with skin and eyes and keep children away from the dishwasher when the door is open.

2.Disposal

Dispose of the dishwasher packaging material correctly.

All packaging materials can be recycled.

Plastic parts are marked with the standard international abbreviations:

■ PE——for polyethylene, e.g. sheet wrapping material
■ PSforpolystyrene, e.g. padding material
■ POM — polyoxymethylene, e.g. plastic clips
■ PP — polypropylene, e.g. Salt filler
■ ABS — Acrylonitrile Butadiene Styrene, e.g. Control Panel

WARNING!

■ Packagingmaterialcouldbedangerousforchildren!
■ For disposing of package and the appliance please go to a recycling centre. Therefore cut
off the powersupplycable and makethe doorclosing device unusable.
■ Cardboard packaging is manufactured from recycled paper and should be disposed in the

3. Operation Instruction

IMPORTANT Togetthebestperformancefromyourdishwasher,readalloperatinginstructions beforeusingitforthefirsttime.

Control Panel

1 On/Off Button: To turn on/off the power supply.
2 Child lock button: press the two buttons for 3 seconds simultaneously to lock the program.
3 Language Button: To Press the button to select the appropriate language.
4 Program Button: To Press the button to select appropriate Program.
5 Delay Button: To Press the button to delay.
6 Alt Button: Dual zone wash function, press the button to select either upper basket or lower basket loaded, and the response indicator.
7 Start /Pause button: To start the selected washingprogram or pause the washingprogram when the machine is working.

8 Display screen: to show the reminding time and the state(running state, delay time etc)
- RinseAidindicator: *
Indicates when the dispenser needs to be refilled.
- Addsaltindicator: S Indicates when the dispenser needs to be refilled.
- Altfunctionsindicator:
- Childlockindicator:
- Delayhoursindicator: ©
• Program indicators:
• Languageindicator:
- Delay time, Remain time, or error codes indicator: 8:88

Dishwasher Features

Frontview

BackView

4. Prior using for the first time

Before using your dishwasher for the first time:

A. Set the water softener
B. Add 1.5Kg dishwasher salt and then full fill the salt container with water
C. Fill the rinse aid dispenser
D. Fillindetergent

A. Water Softener

The water softener must be set manually, using the water hardness dial.
The water softener is designed to remove minerals and salts from the water, which would have
a detrimental or adverse effect on the operation of the appliance.
The higher the content of these minerals and salts, the harder your water is
The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority
can advise you on the hardness of the water in your area.

Adjusting Salt Consumption

The dishwasher is designed to allow for adjustment in the amount of salt consumed based on the hardness of the water used. This is intended to optimise and customise the level of salt consumption.

Please follow the steps below for adjustment in salt consumption.

1. Switch on the appliance;
2. Press the Start/Pause button for more than 5 seconds to start the water
   softener set model within 60 seconds after the appliance was
   switchedon;
3. Press the Start/Pause button to select the proper set according to
   your local environment, the sets will change in the following
   sequence:H1->H2->H3->H4->H5->H6;
4. Press the On/Off button or no operation for 5 seconds to end the set up model.

WATERHARDNESS				SelectorPosition	Saltconsumption (gram/cycle)	Autonomy (cycles/1kgs)
^a H	^b H	Clarke	mmol/l

B. Loading the Salt Into the Softener

Always use the salt intended for use with dishwasher.

The salt container is located beneath the lower basket and should be filled as explained in the following:

Attention!

■ Only use salt specifically designed for the use in dishwashers! Every other type of salt not specifically designed for the use in a dishwasher, especially table salt, will damage the water softener. In case of damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is liable for any damages caused.
■ Only fill with salt just before starting one of the complete washing programs. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.

1

3D diagram of a mechanical component with an open lid and internal parts, no text or symbols present

2

Illustration of a hand pouring liquid into a container with a curved tube and a small bowl (no text or symbols)

A After the lower basket has been removed, unscrew and remove the cap from the salt container. 1
B Place the end of the funnel (supplied) into the hole and introduce about 1.5kg of dishwasher salt.
Fullfill the salt container with water, its normal for a small amount of water to come out of the salt container.
D After filling the container, screw the cap tightly back clockwise.
E The salt warning light will stop being after the salt container has been filled with salt.
Immediately after filling the salt into the salt container, a washing program should be started (Wesuggesttouseashort program). Otherwise the filter system, pump or other important parts of the machine may be damaged by salty water. This is outofwarranty.

Whento Refill the Rinse Aid Dispenser

If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour of the optical level indicator "C" located next to the cap. When the rinse-aid container is full, the whole indicator will be dark. As the rinse-aid diminishes, the size of the dark dot decreases. You should never let the rinse aid level fall 1 / 4 full.

As the rinse aid diminishes, the size of the black dot ontherinseaidlevelindicatorchanges,asillustrated below.

Full
3/4full
1/2full
- 1/4full-Should refill to eliminate spotting
Empty

Close-up of a hand holding a small electronic device with a knob, next to a white panel (no visible text or symbols)

Close-up of a white plastic door with a small inset showing internal components (no visible text or symbols)

Close-up of a hand holding a small circular object next to a white appliance with ventilation slots (no visible text or symbols)

1 To open the dispenser, turn the cap to the "open" (left) arrow and lift it out.
2 Pour the rinse aid into the dispenser, being careful not to overfill.
3 Replace the cap by inserting it aligned with "open" arrow and turning it to the closed (right) arrow.

NOTE: Clean up any rinse aid spilled while during filling with an absorbent cloth to avoid excessive foaming during the next wash. Don't forget to replace the cap before you close dishwasher door.

Adiustina Rinse Aid Dispenser

Detergents

There are 3 sorts of detergents

1. With phosphate and with chlorine
2. With phosphate and without chlorine
3. Without phosphate and without chlorine

Normally new pulverised detergent is without phosphate. Thus the water softener function of phosphate is not given. In this case we recommend to fill salt in the salt container even when the hardness of water is only 6 ^d H. If detergents without phosphate are used in the case of hard water often while spots appear on dishes and glasses. In this case please add more detergent to reach better results. Detergents without chlorine do only bleach a little. Strong and coloured spots will not be removed completely. In this case please choose a program with a higher temperature.

Concentrated Detergent

Based on their chemical composition, detergents can be split in two basic types:

■ conventional, alkaline detergents with caustic components
■ low alkaline concentrated detergents with natural enzymes

Detergent Tablets

Detergent tablets of different brands dissolve at different speeds. For this reason some detergent tablets cannot dissolve and develop their full cleaning power during short programs. Therefore please use long programs when using detergent tablets, to ensure the complete removal of detergent residuals.

Detergent Dispenser

The dispenser must be refilled before the start of each wash cycle following the instructions provided in the wash cycle table. Your dishwasher uses less detergent and rinse aid than Conventional dishwasher. Generally, only one tablespoon of detergent is needed for a normal wash load. More heavily soiled items need more detergent. Always add the detergent just before starting the dishwasher, otherwise it could get damp and will not dissolve properly.

AmountofDetergenttoUse

Fill in Detergent

Fill the detergent dispenser with detergent.

The marking indicates the dosing levels, as illustrated on the right:

A The place of main wash cycle detergent placed.

B The place of pre-wash cycle detergent placed.

Please observe the manufacturers dosing and storage Recommendations as stated on the detergent packaging.

Closethe lid and press until it locks in place.

If the dishes are heavily soiled, place an additional detergent dose in the pre-wash detergent chamber. This detergent will take effect during the pre-wash phase.

A NOTE:

■ You find information about the amount of detergent for the single programme on the last page.
■ Please aware, that according to the level soiling and the specific hardness of water differences are possible.
■ Please observe the manufacturer's recommendations on the detergent packaging.

5. Loading the Dishwasher Baskets

Recommendation

■ Considerbuyingutensils which are identified as dishwasher-proof.
■ Use a mild detergent that is described as 'kind todishes'. If necessary, seek further
informationfromthedetergentmanufacturers.
■ Forparticularitems, select a program with as low atemperature as possible.
■ To prevent damage, do not take glass and cutlery out of the dishwasher immediately after the programme has ended.

For washing in the dishwasher the following cutlery/dishes

Arenotsuitable

■ Cutlery with wooden, hornchina or mother-of-pearl handles
■ Plastic items that are not heat resistant
■ Oldercutlerywithgluedpartsthatarenot
temperatureresistant
■ Bonded cutlery items or dishes
■ Pewterorcooperitems
■ Crystalglass
■ Steel items subject to rusting
■ Woodenplatters
■ Items made from synthetic fibres

Are of limited suitability

■ Some types of glasses can become dull after alarge number of washes
■ Silver and aluminum parts have a tendency to discolour during washing
■ Glazed patterns may fade if machine washed frequently

Attention before or after loading the Dishwasher Baskets

(For best performance of the dishwasher, follow these loading guidelines.

Features and appearance of baskets and cutlery baskets may vary from your model.)

Scrape off any large amounts of leftover food. Soften remnants of burnt food in pans.
It is not necessary to rinse the dishes under running water.
Place objects in the dishwasher in following way:
1. Items such as cups, glasses, pots/pans, etc. are faced downwards.
2. Curved items, or ones with recesses, should be loaded aslant so that water can run off.
3. All utensils are stacked securely and can not tip over.
4. All utensils are placed in the way that the spray arms can rotate freely during washing.

■ The Method Loading Normal Dishware

Loading the Upper Basket

The upper basket is designed to hold more delicate and lighter dishware such as glasses, coffee and teacups and saucers, as well asplates, small bowls and shallow pans (as long as they are not too dirty). Position the dishes and cook wares that they will not get moved by the spray of water.

3D diagram of a mechanical assembly with gears and housing, no visible text or symbols

Pleaseberemindedthat:

Pots, serving bowls, etc, must always be placed top down.
- Deep pots should be slanted to allow water to flow out.

The Bottom Basket features folding spikes so that larger or more pots and pans can be loaded.

Loading the Lower Basket

We suggest that you place large items and the most difficult to clean items are to be placed into the lower basket: such as pots, pans, lids, serving dishes and bowls, as shown in the figure below. It is preferable to place serving dishes and lids on the side of the racks in order to avoid blocking the rotation of the top spray arm.

Illustration of kitchen utensils including a pot, lid, and kettle on a grid (no text or symbols)

Adjusting the Upper Basket

The height of the upper basket can be adjusted in order to create more space for large utensils both for the upper/lower basket. The height of the upper basket can be adjusted by placing the wheels and different height of the rails. Long items, serving cutlery, salad servers and knives should be placed on the shelf so that they do not obstruct the rotation of the spray arms..

Lower position Upper position

Folding back the cup shelves

For better stacking of pots and pans,
the spikes can be folded down as

show in the picture right.

Folding Spikes of Lower Basket

For better stacking of pots and pans,

the spikes can be folded down as

6.Starting a washing program

Wash Cycle Table

NOTE: (★) Means:needtofillrinseintotheRinse-AidDispenser.

Program	Cycle Selection Information	Description of Cycle	Detergent pre/main	Running time(min)	Energy (Kwh)	Water (L)	Rinse Ald
Intensive [2408]	For heaviest soiled crockery, and normally soiledpots , pansdishesetcwithdried onsoiling.	Pre-wash(50 °C)Wash(65 °C)RinseRinseRinse(55°C)Drying	5/30g(or3in1)	165	1.5	17.5
Normal [W3C0]	Fornormally soiled loads, suchas pots, plates, glasses andlightly soiledpans.	Pre-wash(45 °C)Wash(50 °C)RinseRinse(60 °C)Drying	5/30g(or3in1)	180	1.2	14.5
[AT2C](*EN50242)	Standarddailycyclefor normally soiled loads, such aspotsplates glasses.	Pre-washWash(50 °C)RinseRinse(60°C)Drying	5/30g(or3in1)	175	0.93	11
Glass	For lightly soiled crockery andglass.	Pre-washwash(40°C)RinseRinse(60°C)Drying	5/25g(or3in1)	115	0.95	13.5
60 min	For lightly soiled loads that do not need excellent drying efficiency.	Pre-wash(50°C)Wash(60°C)Rinse(60°C)Drying	5/30g	60	1.15	10
Rapid [A30H]	Ashorterwashforlightly soiledloadsthaldonot needdrying.	Wash(40 °C)RinseRinse(45°C)	20g	40	0.6	10
Soak [O6]	Torinsedishesthyouplan (1999)	Pre wash		8	0.1	3.5

NOTE:

When you press the Start/Pause button to pause during washing, the running indicator will stop blinking and the dishwasher will mooing every minute unless you press the Start/Pause button to start.

Change the Program...

Premise:

A cycle that is underway can only be modified if it has only been running for a short time. Otherwise, the detergent may have already been released, and the appliance may have already drained the wash water. If this is the case, the detergent dispenser must be refilled (see the section entitled "Loading the Detergent").

2 Press the Start/Pause button, the machine will be in standby state, press the program button more than 3s then you can change the program to the desired cycle setting (see the section entitled "Starting a wash cycle...").

NOTE:

If you opened the door, there machine will lose. The program light will stop blinking and the buzzer will mooing every minute unless you close the door. After you close the door, the machine will keep on working after 10 seconds.

Forgot to Add a Dish?

Aforgottendishcanbeaddedanytimebeforethedetergentcupopens.

Press the Start/Pause Button to stop the washing.

4 Addforgottendishes.

2 Openthedooralittle.

5 Closethedoor

3 Afterthesprayarmsstopworking,youcanopenthedoor completely.

6 Pressthe Start/PauseButtonthedishwasherwillrun after 10 seconds.

At the End of the Wash Cycle

7. Maintenance and Cleaning

Filtering System

The filter prevents larger remnants of food or other objects from getting inside the pum. The residues may block the filter, in this case they must be removed.

The filter system consists of a coarse filter, a flat (Main filter) And a microfilter(Fine filter).

Mainfilter 1

Food and soil particles trapped in this filter are pulverized by a special jet on the lower spray arm and washed down to drain.

Coarsefilter 2

Larger Items, such as pieces of bones or glass, that could block the drain are trapped in the coarse filter. To remove the items caught by the filter, gently squeeze the tap on the top of this filter and liftout.

Finefilter 3

This filter holds soil and food residues in the sumparea and prevents it from being redeposit on the dishes during wash cycle.

Filterassembly

The filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle. For best performance and results, the filter must be cleaned regularly. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the semicircular filter and cup under running water. To remove the filter device, pull the cup handle in the upward direction.

WARNING!

■ The dishwasher must never be used without the filters.
■ Improper replacement of the filter may reduce the performance level of the appliance and damaged dishes and utensils.

Remarks:

• Inspect the filters for blocking after every time the dishwasher has been used.
• By unscrewing the coarse filter, you can remove the filter system. Remove any food remnants and clean the filters underrunningwater.

NOTE: The entire filter assembly should be cleaned once a week.

Cleaning the Filter

To clean the coarse filter and the fine filter, use a cleaning brush. Reassemble the filter parts as shown in the figures on the last page and reinsert the entire assembly in the dishwasher, positioning it in its seat and pressing downwards.

WARNING!

Whencleaningthefilters, don'tknockonthem. Otherwise, thefilters could be contorted and the performance of the dishwasher could be decreased.

Caring for the Dishwasher

The control panel can be cleaned by using a lightly dampened cloth. After cleaning, make sure to dry it thoroughly.

For the exterior, use a good appliance polish wax.

Never use sharp objects, scouring pads or harsh cleaners on any part of the dishwasher.

Cleaning The Door

To clean the edge around the door, you should use only a soft warm, damp cloth. To avoid penetration of water into the door lock and electrical components, do not use aspraycleanerofanykind.

WARNING!

■ Never use a spray cleaner to clean the door panel as it may damage the door lock and electrical components.
■ Abrasive agents or some paper towels should not be used because of the risk of scratching or leaving spots on the stainless steel surface.

How to Keep Your Dishwasher in Shape

■ After Every Wash

After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture and odours are not trapped inside.

■ Remove the Plug

Before cleaning or performing maintenance, always remove the plug from the socket.

■ No Solvents or Abrasive Cleaning

Toclean the exterior and rubber parts of the dishwasher, do not use solvent or abrasive cleaning products. Only use a cloth with warm soapy water. To remove spots or stains from the surface of the interior, use a cloth dampened with water an a little vinegar, or a cleaning product made specifically for dishwashers.

■ When not in Use for a Long Time

It is recommend that you run a washcycle with the dishwasher empty and then remove the plug from the socket, turn off the water supply and leave the door of the appliance slightly open. This will help the door seals to last longer and prevent odours from forming within the appliance.

■ Moving the Appliance

If the appliance must be moved, try to keep it in the vertical position. If absolutely necessary, it can be positioned on its back.

Seals

One of the factors that cause odourstoform in the dishwasher is food that remains trapped in the seals. Periodic cleaning with a damp sponge will prevent this from occurring.

8. Installation instruction

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can be positioned either to the right or the left sides to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned for levelling, the height of the dishwasher may be altered via adjustment of the screwing level of the feet. In any case, the appliance should not be inclined more than 2°.

About Power Connection

How to Connect the safety supply hose

The appliance must be connected to the water mains using new hose-sets. The old hose-sets should not be reused.

Water pressure must be between 0,04 MPa and 1 MPa. If the pressure is below the minimum consultour Service Department for advice.

1 Pull The safety supply hoses completely out from storage compartment located at rear of dishwasher.
2 Tighterthescrewsofthesafetysupplyhoselothefaucetwiththread3/4inch.
3 Turnwaterfullyonbeforestartingthedishwasher.

ABOUT THE SAFETY SUPPLY HOSE.

The safety supply hose consists of the double walls. The hose's system guarantees its intervention by blocking the flow of water in case of the supply hose breaking and when the air space between the supply hose itself and the outer corrugated hose is full of water.

▲ WARNING!

Ahose that attaches to a sink spray can burst if it is installed on the same waterline as the dishwasher. If your sink has one, it is recommended that the hose be disconnected and the hole plugged.

How to Disconnect the safety supply hose

1 Tumofthewater.
2 Release the water pressure by depressing the pressure release button. This relieves water pressure and protects you, and the room, from severesplashing.
3 Unscrewthesafetysupplyhosefromthefaucet.

COLD WATER CONNECTION

Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that it is fastened lightly in place. If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Drain hose Connection

How to Drain Excess Water From Hoses

If the sink is 1000 higher from the floor, the excess water in hoses cannot be drained directly into the sink. It will be necessary to drain excesswater from hoses into a bowl or suitable container that is held outside and lower than the sink.

Water Outlet

Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure that the water drain hose is not kinked or squashed.

ExtensionHose

If you need a drain hose extension, makes sure to use asimilar drain hose. It must be no longer than 4 metres; otherwise the cleaning effect of the dishwasher could be reduced.

SyphonConnection

The waste connection must be at a height less than 1000 mm (maximum) from the bottom of the dish. The water drain hose should be fixed.

Start of Dishwasher

The following things should be checked before starting the dishwasher.

1 The dishwasher is level and fixed properly
2 The inlet valve is open
3 There is a leakage at the connections of the conducts
4 The wires are tightly connected
5 Thepowerisswitchedon
6 The inlet and drain hoses are knotted
7 All packing materials and printings should be taken out from the dishwasher

9. Troubleshooting Tips

Before Calling for Service

Review the charts on the following pages may save you from calling for service.

Problem	Possible Causes What To Do
Dishwasher doesn't start	Fuseblown,orthe circuitbreakeracted	Replace/useorresetcircuitbreaker.Removeanyother appliancessharingthesamecircuitwiththedishwasher
	Powersupplyisnot turnedon	Makesurethedishwasheristurnedonandthedooris closedsecurely.Makesurethepowercordisproperlypluggedintothe wallsocket.
	Waterpressureslow	Checkthatthewatersupplylsconnectedproperlyand thewateristurnedon.
	Doorofdishwasher notproperlyclosed.	Makesuretoclosethedoorproperlyandlatchit.
water not pumped form dishwasher	Kinkindrainhose	Checkdrainhose.
	Filterclogged	Checkcoarsethefilter"Cleaning (Free Filtered)
	Kitchensinkclogged	Checkthekitchensinktomakesureitisdrainingwell.Iftheproblemisthekltchensinknotdraining,youmay needaplumberratherthanaservicemanfordishwashers.
Suds in the tub	Improperdetergent	Useonlythespecialdishwasherdetergenttoavoldsuds.Ilthisoccurs.openthedishwasherandletsudsevaporate.Add1gallonofcoldwatertothetub.Closeandlatchthe dishwasher,thenselectanycycle.Dishwasherwilldrain outthewaterathefirststep.Openthedorafterdraining isstopandchecklthesudsisdisappeared.Repeatifnecessary.
	Spilledrinse-aid	Alwayswipeuprinse-aidspillsimmediately.
Stained tub interior	Detergentwith colourantwasused	Makesurethathedetergentlistheonewithout colourant.
White film on	Hardwaterminerals	Tocleantheinterior.useadamospondewith

Unsatis -factory washing result

Unsatis -factory drying result

Problem	Possible Causes	What To Do
The dishes are not clean	Thedisheswerenot loadedcorrectly.	Seenotesin"LoadingtheDishwasherBaskets".
	Theprogrammewas notpowerfulenough.	Selectamoreintensiveprogramme.See"WashCycleTable."
	Notenoughdetergent wasdispensed.	Usernoredetergent,orchangeyourdetergent.
	Itemsareblocking thepathofspayarms.r	Rearrangetheitemssothatthespaycanrotatefreely.r
	Thefiltercombination in the base of wash cabinetisnotcleanor isnotcorrectlyfitted. Thismaycause thespayarmjets togetblocked.	Cleanand/orfitthefiltercombinationcorrectly.Cleanthespayarmjets.See"CleaningtheSpray Arms".
Cloudiness on glassware	Combinationofsoft waterandtoomuch detergent.	Uselessdetergentifyouhavesoftwaterandselect ashortestcycletowashthoglasswareandtoget themclean.
Black or gray marks on dishes	Aluminumutensils haverubbedagainst dishes.	Useamilidabraslvecleanertoeliminatethosemarks.
Detergent left in dispenser cups	Dishesblock detergentcups.	Re-loadingthedishesproperly.
The dishes are not drying	Improperloading	Loacthedishwasherassuggestedinthedirections.
	Toolittlerinse-aid	Increasetheamountofrinse-aid/refiltrherinse-aid dispenser.
	Dishesareremoved toosoon	Donotemptyyourdishwasherimmediatelyafter washing.Openthedoorslightlysothatthesteamcan escape.Beginunloadingthedishwasheronlyoncet hedishesarebarelywarmtothetouch.Emptythelow basketfirst.Thispreventswaterformdroppingoff dishesIntheupperbasket.
	Wrongprogram hasheanselected	Inshortprogramthewashingtemperatureislower.Thisleolnowerecleaningperformance Choose

WARNING!

■ Ifoverflowoccurs,turnoffthemainwatersupplybeforecallingaservice.

■ Ifthereiswaterinthebasepanbecauseofanoverfillorsmallleak,

thewatershouldberemovedbeforerestartingthedishwasher.

Technical Information

Diagram of a basket with various mechanical components arranged in a grid pattern (no text or labels)

1 Soup spoons
2 Forks
3 Knives
4 Teaspoons

Information for comparability tests in accordance with EN 50242
Capacity: 14 place settings
Position of the upper basket: lower position
Programme: Eco
Rinse aid setting: 6
Softener setting: H4

Technical Data Sheet

Sheet of household dishwasher according to EU Directive 1059/2010:

Manufacturer	Meireles
Type/Description	MLL147W/MLL147X
Standardplacesettings	14
Energy efficiency class 1	A++
Annual energy consumption 2	266kWh
Energy consumption of the standard cleaning cycle	0.93kWh
Power consumption of off-mode	0.45W
Power consumption of left-on mode	0.55W
Annualwaterconsumption 3	3080 liter
Dryingefficiencyclass 4	A
Standardcleaningcycle 5	ECO50°C
Program duration of the standard cleaning cycle	175min
Noiselevel	47dB(A)re1pW
Mounting	Freestanding
Couldbebuilt-in	Yes
Height	84.5cm
Width	59.8cm
Depth(withconnectors)	60cm
Powerconsumption	1930W
Ratedvoltage/frequency	230V~/50Hz