FDYB 10011 G Aquarius - Dishwasher HOTPOINT - Free user manual and instructions
Find the device manual for free FDYB 10011 G Aquarius HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Hotpoint |
| Model | FDYB 10011 G Aquarius |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | Approx. 50 kg |
| Energy Class | A++ |
| Annual Energy Consumption | 290 kWh |
| Water Consumption per Cycle | 9.5 L |
| Noise Level | 49 dB(A) |
| Number of Place Settings | 14 |
| Number of Programs | 7 |
| Programs | Intensive, Eco, Normal, Quick, Soak, Delicate, Auto |
| Drying System | Condensation drying |
| Water Softener | Built-in with salt reservoir |
| Child Lock | Yes |
| Delay Start | Yes (up to 24 hours) |
| Filter System | Self-cleaning microfilter |
| Rinse Aid Dispenser | Yes, adjustable |
| Cutlery Basket | Yes, removable |
| Height Adjustable Upper Basket | Yes, 3 positions |
| Electrical Connection | 220-240 V, 50 Hz |
| Power Consumption (Standby) | 0.5 W |
| Water Connection | Cold water only |
Frequently Asked Questions - FDYB 10011 G Aquarius HOTPOINT
How do I reset the salt indicator light?
Fill the salt reservoir with dishwasher salt until it overflows, then close the cap. The light should turn off after a few cycles. If not, check the water softener settings.
What does the E1 error code mean?
The E1 error indicates a water supply issue. Check that the water tap is open and the inlet hose is not kinked. Also clean the inlet filter.
How often should I clean the filter?
Clean the coarse filter and microfilter after every 5-10 cycles. Rinse under running water and remove any debris. Do not use the dishwasher without filters.
Can I use regular dish soap instead of dishwasher detergent?
No, only use dishwasher detergents. Regular soap creates too much foam and can damage the appliance. Use powder, gel, or multifunction tablets.
The dishes are not drying properly. What can I do?
Ensure you use rinse aid and increase the rinse aid dosage. Also, select a program with a drying phase, like Eco or Intensive. After the cycle, leave the door slightly open.
How do I set the water hardness level?
Refer to the manual for the hardness table. Press and hold the Start button for 3 seconds, then press the Program button to adjust the level. Confirm by pressing Start again.
Why is the dishwasher making a loud noise?
Check if the spray arms are blocked by dishes or debris. Also ensure the dishwasher is level. A grinding noise may indicate a foreign object in the pump.
Can I install the dishwasher under a counter?
Yes, the FDYB 10011 G Aquarius is designed for under-counter installation. Remove the top panel if needed and ensure proper ventilation.
How do I activate the child lock?
Press and hold the Delay Start and Program buttons simultaneously for 5 seconds. A lock symbol will appear on the display. Repeat to deactivate.
What does the Aquarius feature do?
The Aquarius system optimizes water distribution and softens water automatically, ensuring better washing performance and reduced water consumption.
User questions about FDYB 10011 G Aquarius HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual FDYB 10011 G Aquarius - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FDYB 10011 G Aquarius by HOTPOINT.