KSV80HRD - Air-conditioner KELVINATOR - Free user manual and instructions
Find the device manual for free KSV80HRD KELVINATOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split-type Air Conditioner |
| Brand | Kelvinator |
| Model | KSV80HRD |
| Cooling Capacity (BTU) | 8000 BTU |
| Energy Efficiency Ratio (EER) | 8.5 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Airflow (CFM) | 350 CFM |
| Indoor Unit Dimensions (WxHxD) | 800 x 280 x 200 mm |
| Outdoor Unit Dimensions (WxHxD) | 700 x 500 x 250 mm |
| Indoor Unit Weight | 8 kg |
| Outdoor Unit Weight | 25 kg |
| Noise Level Indoor | 32 dBA |
| Noise Level Outdoor | 52 dBA |
| Remote Control | Yes, included |
| Timer | 24-hour programmable |
| Sleep Mode | Yes |
| Auto Restart | Yes |
| Air Purification | Washable filter |
| Dehumidification | Yes |
| Fan Speeds | 3 speeds (Low, Med, High) |
| Installation Type | Wall-mounted |
| Warranty | 1 year parts and labor |
| Maintenance | Clean filter every 2 weeks |
| Safety Features | Auto shut-off, compressor protection |
Frequently Asked Questions - KSV80HRD KELVINATOR
How do I clean the air filter?
Turn off the unit and unplug it. Open the front panel, remove the filter, and wash it with warm water. Allow it to dry completely before reinstalling. Clean the filter every 2 weeks for optimal performance.
What should I do if the remote control is not working?
Check if the batteries are inserted correctly and replace them if needed. Ensure there are no obstacles between the remote and the indoor unit. If still not working, reset the remote by removing batteries and pressing any button for 5 seconds.
How to set the timer on the air conditioner?
Press the Timer button on the remote. Use the +/- buttons to set the desired time. Press Timer again to confirm. The unit will turn on/off after the set duration.
Why is the air conditioner not cooling?
Check if the filter is dirty; clean it if needed. Ensure the set temperature is lower than room temperature. Also, verify that the outdoor unit is not obstructed and that the refrigerant level is sufficient (requires professional inspection).
What do the error codes on the display mean?
Common error codes: E1 (sensor fault), E2 (freeze protection), E3 (compressor protection). Refer to the user manual for a complete list. If an error persists, contact customer service.
How do I use the sleep mode?
Press the Sleep button on the remote. The unit will gradually adjust the temperature to provide a comfortable sleeping environment. It also reduces noise levels.
Why is water leaking from the indoor unit?
Ensure the unit is properly leveled. A clogged drain line or dirty filter can cause water accumulation. Clean the filter and check the drain pipe for blockages.
Can I use an extension cord with the air conditioner?
No. Do not use an extension cord. The unit must be plugged directly into a dedicated outlet that matches the power specifications. Using an extension cord can cause overheating or fire.
How often should I service the air conditioner?
Professional maintenance is recommended once a year. This includes checking refrigerant levels, cleaning coils, and ensuring all components function correctly.
What should I do if the unit emits a burning smell?
Turn off the unit immediately and unplug it. A burning smell may indicate electrical issues or melting components. Contact a qualified technician for inspection before using the unit again.
User questions about KSV80HRD KELVINATOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual KSV80HRD - KELVINATOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KSV80HRD by KELVINATOR.