ST9100S - Thermostat HONEYWELL - Free user manual and instructions
Find the device manual for free ST9100S HONEYWELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermostat |
| Brand | Honeywell |
| Model | ST9100S |
| Dimensions (W x H x D) | 120 mm x 80 mm x 30 mm |
| Weight | 200 g |
| Power Supply | 2 x AA alkaline batteries |
| Display Type | LCD with backlight |
| Programmable | Yes, 7-day programmable |
| Temperature Range | 5°C to 35°C |
| Control Type | Digital push button |
| Frost Protection | Yes, automatic |
| Key Lock Function | Yes |
| Mounting | Wall mount (screws included) |
| Compatibility | Gas, oil, electric heating systems |
| Warranty | 2 years |
| Maintenance | Wipe with dry, soft cloth only |
| Safety Features | Overheat protection, low battery indicator |
| Spare Parts | Batteries (AA), mounting screws |
| Repairability | Refer to user manual for troubleshooting |
| General Info | Honeywell ST9100S is a digital thermostat for home heating control |
Frequently Asked Questions - ST9100S HONEYWELL
How do I set the time on my Honeywell ST9100S?
Press the SET button until the time display flashes. Use the + and - buttons to adjust hours and minutes. Press SET again to confirm.
How to program a heating schedule?
Press PROG to enter programming mode. Select the day or block of days, then set the time and temperature for each period (Wake, Leave, Return, Sleep). Press DONE to save.
How to temporarily override the temperature?
Use the + or - buttons to adjust the temperature. The override will last until the next programmed event or until you press HOLD to hold the temperature indefinitely.
What batteries does the ST9100S use?
It requires two AA alkaline batteries. Do not use rechargeable batteries as they may not provide stable voltage.
How to reset the thermostat to factory defaults?
Press and hold the MENU button for 5 seconds until the display clears. Then release and press SET to confirm reset. All settings will be restored to factory defaults.
Why is the display blank?
Check if the batteries are depleted or incorrectly inserted. Replace with fresh AA batteries. Also ensure the thermostat is not in energy saving mode (display off).
How to lock the keypad?
Press and hold the MENU button for 3 seconds until the lock icon appears. To unlock, repeat the same action until the icon disappears.
What is frost protection?
Frost protection automatically keeps the temperature above 5°C to prevent pipes from freezing when the thermostat is set to off or low.
How to clean the thermostat?
Clean the exterior with a soft, dry cloth. Do not use water, cleaners, or abrasives. Avoid spraying liquids directly on the device.
Where should I mount the thermostat?
Mount it on an interior wall about 1.5 meters above the floor, away from direct sunlight, drafts, doors, windows, and heat sources for accurate temperature sensing.
User questions about ST9100S HONEYWELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermostat in PDF format for free! Find your manual ST9100S - HONEYWELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST9100S by HONEYWELL.