ADG 7960 - Dishwasher WHIRLPOOL - Free user manual and instructions
Find the device manual for free ADG 7960 WHIRLPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dishwasher |
| Brand | Whirlpool |
| Model | ADG 7960 |
| Installation Type | Built-in |
| Place Settings | 14 |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 250 kWh |
| Water Consumption per Cycle | 9.5 L |
| Noise Level | 44 dB(A) |
| Number of Programs | 6 |
| Programs | Intensive, Normal, Eco, Quick, Glass, Pre-Wash |
| Drying System | Condensation drying |
| Control Type | Electronic with LED display |
| Height (Adjustable) | 81.5 - 86.5 cm |
| Width | 59.8 cm |
| Depth | 57.5 cm |
| Weight | 42 kg |
| Power Supply | 220-240 V, 50 Hz |
| Current | 10 A |
| Features | Delay start, Salt and rinse aid indicators, AquaStop |
| Safety | Child lock, Overflow protection |
| Maintenance | Clean filters regularly, use dishwasher cleaner |
Frequently Asked Questions - ADG 7960 WHIRLPOOL
How do I start a wash cycle on the Whirlpool ADG 7960?
Press the Power button, select your desired program using the program selector, and then press the Start button. The dishwasher will begin after a few seconds.
What should I do if the dishwasher does not drain water?
Check and clean the filter and the drain hose for blockages. Ensure the drain hose is not kinked. If the problem persists, the drain pump may need to be inspected.
How do I clean the filter of the ADG 7960?
Turn off the dishwasher and remove the lower rack. Unscrew the filter assembly (usually by turning counterclockwise). Rinse under running water and reassemble.
Why is the dishwasher not cleaning dishes properly?
Ensure you are using the correct detergent and that the spray arms are not blocked. Also check that the filters are clean and that the water temperature is sufficient (min 50°C).
How do I activate the child lock?
Press and hold the Alarm button (or specific child lock button) for 5 seconds until the indicator light turns on. To deactivate, press and hold again.
What do the error codes mean?
Common codes: F1 (water supply issue), F2 (heating problem), F3 (water level sensor). Refer to the manual for a full list. Reset the appliance and if persists, contact service.
How can I reduce the noise level during operation?
Ensure the dishwasher is leveled and not touching adjacent cabinets. Use the Silent or Night program if available. Also check that dishes are not rattling.
Can I use regular dish soap instead of dishwasher detergent?
No, never use regular dish soap as it creates excessive suds and can damage the machine. Only use dishwasher detergent (powder, gel, or tablets).
How do I replace the rinse aid?
Open the rinse aid dispenser cap (usually next to the detergent drawer). Fill to the maximum level with rinse aid and close the cap. Adjust the dosage if needed.
What is the maximum cutlery capacity?
The upper basket can hold up to 12 forks/knives in the cutlery tray, and the lower basket can hold additional cutlery in the basket. Total capacity is for 14 place settings.
User questions about ADG 7960 WHIRLPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual ADG 7960 - WHIRLPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADG 7960 by WHIRLPOOL.