DFL-860E - Pare-feu matériel D-LINK - Free user manual and instructions
Find the device manual for free DFL-860E D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hardware Firewall / UTM Appliance |
| Model | D-Link DFL-860E |
| Interfaces | 8 x 10/100/1000 Gigabit Ethernet, 2 x SFP |
| Firewall Throughput | 1 Gbps |
| VPN Throughput | 500 Mbps |
| IPS Throughput | 300 Mbps |
| Concurrent Connections | 800,000 |
| New Connections per Second | 30,000 |
| Memory | 4 GB DDR3 RAM |
| Storage | 4 GB Flash Disk |
| Dimensions (W x D x H) | 440 x 250 x 44 mm (1U Rackmount) |
| Weight | 3.5 kg |
| Power Supply | AC 100-240V, 50-60 Hz, 60W |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Security Functions | Stateful firewall, VPN (IPsec/SSL), IDS/IPS, antivirus, web filtering, application control |
| Management | Web GUI (HTTPS), CLI (SSH), SNMP v1/v2c/v3 |
| Logging and Monitoring | Syslog, SNMP traps, email alerts |
| High Availability | Active/Passive clustering |
| Warranty | 1 year limited hardware warranty |
Frequently Asked Questions - DFL-860E D-LINK
What is the default IP address for the DFL-860E management interface?
The default management IP is 192.168.1.1 with subnet mask 255.255.255.0. You can access the web interface via HTTPS.
How do I reset the DFL-860E to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the status LEDs flash. The device will reboot with factory settings.
Can the DFL-860E be rackmounted?
Yes, it is a 1U rackmount form factor. Mounting ears are included for attachment to a standard 19-inch rack.
What VPN protocols are supported?
It supports IPsec (site-to-site and remote access) and SSL VPN for secure remote connectivity.
How do I configure VLANs on the DFL-860E?
Go to Network > Interfaces in the web GUI, add VLAN sub-interfaces under a physical port, and assign them to desired zones.
What is the maximum number of concurrent VPN tunnels?
The DFL-860E supports up to 200 concurrent IPsec VPN tunnels.
How do I update the firmware?
Download the latest firmware from D-Link support. Go to System > Firmware Update in the web GUI and upload the binary file.
Can I use the DFL-860E as a DHCP server?
Yes, it has a built-in DHCP server. Configure under Network > DHCP Server on the LAN interface.
How do I set up port forwarding?
Create a firewall rule in Firewall > Rules with action NAT Destination to forward traffic from WAN to a LAN host.
What security subscriptions are available?
D-Link offers Security Services including antivirus, IPS, and web filtering. A subscription license is required for these features.
User questions about DFL-860E D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pare-feu matériel in PDF format for free! Find your manual DFL-860E - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFL-860E by D-LINK.